Temat: stress concentration - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Designing of stress relieve groove parameters for flat endplates of pressure boilers
Autorzy:: Szybiński, B.
Barski, M.
Wygoda, M.
Powiązania:: https://bibliotekanauki.pl/articles/247780.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: pressure boiler
flat ends
stress concentration
FEM analysis
Opis:: The application of flat ends as closures in pressure boilers is a certain alternative for commonly used dished ends. However, it is inevitably joined with the stress concentration presence in the vicinity of the junction between the cylindrical pipe and the ending flat plate. The notch effect, which is observed in the connection area, is usually caused by the abrupt change of the inner wall shape and the lack of the curvature continuity in this region. The problem of the stress reduction in the transition zone between the cylindrical pipe and the endplate has been studied by researchers from many years and several proposals how to modify the shape of the respective elements have been established. On the base of these results, several designs for flat end closures are proposed in the codes applied in pressure boilers calculations. This paper shows the effectiveness of one of the design proposals, admitted by code EN 13445-3. In the proposed analysis the special attention are paid to flat ending plates with the circular stress relieve grooves. The parameters of the groove radii and location of its centre are set by a system of inequalities, which usually defines the region of admissible values for radii and position of the circular groove centre. The choice of these values strongly influences the stress concentration and in the considered code, no clear suggestions or justification is given how to choose the best groove parameters, providing the minimum stress concentration. In this report, the Authors show how to choose the best combination of the design parameters providing the minimum stress concentration.
Źródło:: Journal of KONES; 2016, 23, 4; 513-520
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Design modifications of pressure boilers with flat endplates with stress relief groove
Autorzy:: Szybiński, B.
Wygoda, M.
Powiązania:: https://bibliotekanauki.pl/articles/241901.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: pressure boilers
flat ends
stress concentration
FEM analysis
Opis:: Stress concentration is still present in the vicinities of structural notches in engineering structures. Zones with higher level of stress are particularly dangerous for structures subjected to fatigue or dynamic loads. The vessels with flat endplates with stress relief grooves are the common examples of such structures. Unfortunately, no clear evidence is given in existing codes how optimally to choose the circular groove radius and the optimal value of that radius depends on the dimensions of the boiler, operating conditions and the material used in manufacturing. Additionally, commonly used grooves with circular shapes are not optimal. Series of experimental tests, numerical or analytical studies presented in numerous articles confirmed these facts. In the presented article, the Authors proposed two-stage modification of the investigated vessel. The first step relies on change of the shape of the groove in the endplate, which provides certain reduction of stress concentration but still plastic deformations in the groove vicinity are not eliminated. The second step of the design modification is proposed for the boiler with the optimal elliptic groove configuration. In this step, some material is added around the top of the outer edge of the endplate. Two simple shapes are proposed for these parts - the short cylindrical ring or alternatively the circular ring welded on the top the endplate is used. For both concepts, the search of optimal dimension/parameters is performed. The numerical results of that study clearly show that the full elimination of plastic deformations near the groove is possible. The numerical analysis and optimizations were made with the well- established finite element software ANSYS, which is accepted by commonly used codes for designing of pressure vessels.
Źródło:: Journal of KONES; 2017, 24, 3; 309-316
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numerical investigations of stress concentration in reinforcement steel structure by composite overlays
Autorzy:: Szybiński, Bogdan
Wygoda, Mateusz
Powiązania:: https://bibliotekanauki.pl/articles/242629.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: plate
hole
cut-out
stress concentration
FRP composite
reinforcement
FEM
Opis:: The stress concentration observed in the vicinity of cut-outs and holes in structural elements significantly influences the fatigue endurance of machines subjected to cyclic loads. Numerous studies have been made so far to improve this situation and increase the structure lifetime. Several design recommendations have also been worked out to avoid the problem of premature failure. The proposed article illustrates the influence of the composite overlays applied around the cut-outs made in flat steel constructional elements subjected to axial tension. The detailed study concerns the reinforcement made from the FRP (fibre reinforcement polymer) composite applied around the notches. Two types of composite materials were used, namely: TVR 380 M12/R-glass (glass fibres embedded in epoxy resin matrix) and AS4D/9310 (carbon fibres embedded in epoxy resin matrix). In the first step, the detailed numerical studies (finite element analysis) were performed for the steel samples (with no overlays added) with cut-outs made in the form of circle, square and triangle hole (the last two with rounded corners). The results of these studies were compared with the existing analytical solutions with respect to the stress concentration factors (SCF) estimation. The relatively good conformity was observed when using dense meshes of finite elements placed around the void vicinity. In the next step, the composite overlays were applied around cut-outs and their influence on the stress concentration was investigated. The influence of the fibre orientation, numbers of layers, sizes of the composite overlay used were considered. It was proved that the application of composite overlays evidently decreases the stress concentration around the notches.
Źródło:: Journal of KONES; 2019, 26, 4; 249-256
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "stress concentration" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język