Temat: safety. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: On safety and dependability of automotiye engineering regarding applicable tools and legislation
Autorzy:: Fulep, T.
Voith, A.
Powiązania:: https://bibliotekanauki.pl/articles/245739.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
safety
dependability
safety-related
Opis:: In today's automotive industry, companies are organized into simultaneous engineering teams to develop their new products. The new way of doing business enables some companies to develop their new products quicker and cheaper with higher quality and reliability. In the past few years there has been the tendency to increase the safety of vehicles by introducing intelligent assistance systems that help the driver to cope with critical driving situations. These functions are characterized by the active control of the driving dynamics by distributed assistance systems, which therefore need a reliable communication network. The faults in the electronic components, which control these functions, are safety-critical. However, the assistance functions deliver only an add-on service in accordance with a fail-safe strategy for the electronic components. If there is any doubt about the correct behaviour of the assistance system, it will be switched off. For by-wire systems, without a mechanical back-up, a new dimension of safety requirements for automotive electronics is reached. After a fault the system has to be fail-tolerant until a safe state is reached. realizing that road vehicles, mostly commercial vehicles taking part over proportionally in accidents, become more and more complex indicates that suitable and adaptable analysis methods are crucial to be applied with appropriate certification body.
Źródło:: Journal of KONES; 2009, 16, 4; 123-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Analysis of properties of operation of the supporting equipment for the seat belts
Autorzy:: Żuchowski, A.
Jackowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/242023.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vehicle safety
crash tests
safety belt
pretensioner
force limiter
Opis:: Applying the pretensioners and the belt force limiters in cars had a positive impact on the seat belts effectiveness in protecting the people driving against the effects of collisions. In this way, delayed action of the seat belts, resulting from the flexibility of the belt and the operating time of the retractor locking mechanism, was partially eliminated. The tasks and properties of the pretensioners and force limiters used in cars will be described in the paper. Implementations of the forces acting at the driver's lap belts and shoulder belts during a frontal collision into a rigid barrier, at the speed of 56km/h, will be presented. On this basis the properties of the pretensioners and belt force limiters will be determined. The characteristics of rigidity (force - displacement) of the shoulder belts of various designs will be presented, too. On the basis of the results of the crash tests (NHTSA, USA) for several cars the dynamic loads, which act on the driver during a frontal collision into a rigid barrier, will be analysed. The biomechanical indices of the human immune to the effects of shock loads will be taken into account. The analysis will include the passenger cars (sedan) from the years 1995 – 2004, which were fitted with the seat belts of various designs.
Źródło:: Journal of KONES; 2011, 18, 1; 697-704
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Fuzzy approach to dimensioning the navigational safety in maritime transport
Autorzy:: Smolarek, L.
Powiązania:: https://bibliotekanauki.pl/articles/245023.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: safety dimensioning
stochastic fuzzy models
safety in sea transport
Opis:: The safety of ships involved in the process of transport is one of the most important criteria in the maritime transport. Important factors making up the safety include the technical efficiency of the ship, the qualifications of the people in charge of the ship and the conditions under which the transport process takes a place. The paper focuses on the problems significant and characteristic to the ship traffic safety under uncertainty conditions. The ship safety at supervised traffic requires continuous identification of the navigational situation. Very often safety assessment of the traffic situation is made by examining the relative positions of vessel’s domains. A limitation is that under uncertainty conditions and more than two vessels we have to take into consideration dynamic domains according to the situations of conflicts, which is rather difficult to analyse. One way to assess the traffic safety approximation is analysis of the potentially conflicting situation. Safety in maritime transport can be analysed at the micro level (safety of the ship, the safety of navigation in specific situation mobility) and in terms of macro models (evaluation over time).In the article some problems of fuzzy description of traffic safety in maritime transport are presented. Basic definitions and a stochastic approach to concept of traffic safety in transport are given. The fuzzy approach to stochastic method of dimensioning traffic safety, useful in dynamic traffic control, is proposed.
Źródło:: Journal of KONES; 2014, 21, 4; 453-459
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The retrofitting of trucks already being in use in Poland in a range of the indirect visibility
Autorzy:: Olejnik, K.
Powiązania:: https://bibliotekanauki.pl/articles/243921.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: safety
transport
visibility
Opis:: The paper discusses the need of additional equipment of trucks which are already being in use in Poland with the devices of the indirect visibility which enable to observe much bigger area in the neighbourhood of the vehicle. A large number of accidents are caused by drivers of larger vehicles who are not aware that other road users are very close to or beside their own vehicle. These accidents are often related to a change of direction at crossings, junctions or roundabouts, when drivers fail to detect other road users in the blind spots, which exist in the immediate area around their vehicles. The increase of the indirect visibility from the driver's seat improves safety of the participants in the road traffic. Over 400 people lost their life in the EU in of these accidents. Most of the victims of such accidents are pedestrians or two-wheelers, a particularly vulnerable category of road users. Implementation of the EU Directive 2003/97 (which is obligatory for the new vehicles) to the vehicles earlier registered can be done by replacement and installment of the new mirrors which contain bigger areas. This paper shows the results of the research on the independence of minimum dimensions (s, w) of mirrors class V and its placement on values of radius of curvature. It contains much bigger area than it is due to demands. Author also made a proposition on how to solve the problem of the limited visibility on the inclined crossing of roads and on enlarged crossing while turning left.
Źródło:: Journal of KONES; 2008, 15, 2; 357-364
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Integrated system for safe transportation of children to school - with the use of intelligent transport systems (ITS)
Autorzy:: Jankowska, D. M.
Powiązania:: https://bibliotekanauki.pl/articles/244058.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road traffic safety
road traffic safety guidelines children transportation safety
ntelligent transport systems
intelligent transport systems
Opis:: The aim of the paper is to present the main guidelines of the Safeway2School European research project. The project's primary objective is to determine the safest route for school buses that transport children to school, through low traffic density areas, avoiding black spots. The project anticipates the use of Intelligent Transport Systems (ITS) in the process of children transportation. Within the project the Route Planning System, Rerouting System and Warning System will be designed and developed for school buses as well as for all surrounding vehicles. Project aims at designing the route for school buses and also the alternative route (in case the bus has to be rerouted due to traffic congestion or traffic incident) in order to maximize the safety of transported children with the use of localization and route planning tools, on-board safety systems and sensors in vehicles and road infrastructure. It is also crucial to design the network of ,"intelligent" bus stops (child-bus stop-bus communication) and equip the pilot group of children with special tags. The target group of the project consists of school bus drivers, children (pupils 6-16 years old) and their families, but also the road infrastructure authorities, car manufacturers, other road users and representatives of public administration. Within the project the training programs for school bus drivers, children, parents and other drivers will be elaborated. The aim of such activities is to result in unification of guidelines, training schemes and regulations concerning safe transportation of children to school. For the pilot realization of the above mentioned systems and training programs four European localizations have been chosen: Sweden, Austria, Italy and Poland. At the end of the project realization an evaluation of usability and effectiveness of applied technologies, as well as the level of system user's acceptance will be conducted. The project was submitted to the European Commission within the 7th Frame Program. Motor Transport Institute is the Polish project executor.
Źródło:: Journal of KONES; 2008, 15, 2; 137-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Comparative analysis of frontal zone of deformation in vehicles with self-supporting and framed bodies
Autorzy:: Prochowski, L.
Żółtowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247110.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road safety
vehicle safety
crash tests
body deformation range
Opis:: The work considers changes occurred in the features of the supporting structure in three categories of cars, namely: with the self-supporting body, framed body an intermediate structures between these two solutions. The area of analysis includes the length of deformation (crush) of the front al part of the car after collision with a rigid obstacle (barrier). The range of deformation is a significant factor of the passive car safety and indicates the efficiency of fulfilling the protective function for the passengers. The work shows absolute and relative (percentage and unit) variations of the car deformation, depending on the year of manufacture, including the period of 1980 - 2010. Marked trend lines indicated general nature of the deformation range variations together with the improvement of the car supporting system structures. The course of the trend line has been calculated on the basis of average deformation length values, calculated in defined periods of vehicle manufacture. Selected sections of time result from the division of the period of analysis 1980 - 2010 into six parts. The analysis of the deformation length of the frontal part of passenger cars, SUVs and pickups has been combined with simultaneous evaluation of total car length variations and their weight values. The car weight directly affects the kinetic energy of the impact so it has a significant influence on the range of deformation of the car front during collision with an obstacle.
Źródło:: Journal of KONES; 2011, 18, 4; 397-407
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Application of eyetracking research techniques into road safety studies - theoretical considerations
Autorzy:: Kamiński, T.
Kruszewski, M.
Niezgoda, M.
Soluch, P.
Powiązania:: https://bibliotekanauki.pl/articles/241799.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: eyetracking
road safety audit (RSA)
driver's behaviours
road safety analysis
Opis:: In recent years, both in Poland and throughout Europe the number of road accidents and the number of people injured and killed in these cases systematically decreases (despite a slight increase in 2011). Despite the general goals of EU transport policy for years 2000-2010 have not been fulfilled (the number of fatalities in road accidents have not been reduced by half in these years) the Commission on Mobility and Transport is continuing its efforts to reduce the number of accidents, which resulted in the EP resolution of 27th August, 2011. Under this policy, the EU Member States are forced to develop and implement appropriate procedures and requirements associated with road safety analysis in the near future. An important obligation have been introduced with the Directive 2008/96/EC, stating the compulsory road safety audits (RSA) should be carried on TEN-T road network. European Parliament also announced extension of this obligation on other public roads in the near future. These aspirations could be supported with modern engineering and research technology. In following article, authors describe the possibilities of using eyetracking technologies in studies over road safety analysis. Therefore, modern eyetracking devices were characterized, with particular emphasis on its possible use in the study of driver's behaviours in road traffic conditions. Also, a brief analysis of the methodology of the eyetracking experiments in traffic conditions and their results was presented, indicating possibilities of carrying RSA using similar equipment. In the last chapter authors, discuss possible use of eyetracking technologies in studies of road safety analysis in the context of the existing law in European Union and each member's law regulation system.
Źródło:: Journal of KONES; 2012, 19, 4; 259-266
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Child safety in a car during a frontal collision
Autorzy:: Żuchowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/241889.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
vehicle safety
crash tests
child safety
booster seat
Opis:: Road accidents with participation of the children are of particular nature. According to surveys, the older children at the age of 8-12 years are often transported in cars in a wrong way. They are usually fastened with seat belts designed for adult passengers. In order to make the seat belts safe for a child, they should be used together with a booster cushion or a high back booster seat. This paper presents the test results and analysis of dynamic loads affecting a child in the back seat of a passenger car during a frontal collision. The car body was accelerated to a speed of about 48 km/h and then it was suddenly stopped in a time of about 100 ms. The analysis was carried out on the basis of results of experimental tests performed at the collision station in the Automotive Industry Institute in Warsaw. The attention was paid to the influence of protection device type on the P10 dummy, representing a child at the age of about 10 years. Three child protection options during a collision were considered: the dummy was sitting directly in a car seat, on a booster cushion and on a seat. The dummy was fastened with standard seat belts. Evaluation of the protection device influence on the dummy loads was given in association with the operation of the seat belts. During evaluation, the indexes of biomechanical resistance of a human body to the impact load effects were used. They made the basis for the evaluation of the child injury severity risk.
Źródło:: Journal of KONES; 2013, 20, 1; 395-402
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Analysis of displacement of a concrete barrier on impact of a vehicle. theoretical model and experimental validation
Autorzy:: Prochowski, L.
Powiązania:: https://bibliotekanauki.pl/articles/247667.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road transport
road safety
roadside crash
concrete barrier
safety barriers
Opis:: A vehicle hitting a traffic barrier creates a major threat to traffic safety as a result of displacement of components of the barrier by the forces transferred from the vehicle. We built a theoretical model of the dynamics of such processes and behaviour of concrete barriers set on various types of surfaces. We calculated the displacement as a function of vehicle impact energy and barrier base. We completed analytical approximation for our calculations and we referred the theoretical results to experimental test results. This validated our model of barrier and vehicle movement dynamics as fully qualified for use in the planning of safer barriers and evaluation of barrier effect on traffic. Basing on our calculations, we determined that a second-order polynomial can be used for describing the lateral displacement of a barrier placed on various types of surfaces for a wide range of impact energies (actually, from O to 120 kJ). The courses of the approximating function represent an efficient model for determining the maximum lateral displacement of a concrete barrier on impact of a B or C segment vehicle.
Źródło:: Journal of KONES; 2010, 17, 4; 399-406
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: The analysis of occupant motion in frontal barrier impact of a chassis frame vehicle
Autorzy:: Prochowski, L.
Zielonka, K.
Żuchowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/244471.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road safety
vehicle safety
crash tests
frontal accidents
occupant kinematic
Opis:: Human body motion during a road accident usually results from the effect of forces of inertia. The analysis of that motion, particularly displacements towards the vehicle interior have significant practical aspect as it facilitates conclusions concerning the mechanisms of danger and injury formation. At the same time, the analysis provides direct indications regarding the improvement of passive safety equipment. The paper presents the time-space diagrams of motion of dummy’s head, neck, torso and hips – the driver of a frame chassis vehicle, identified on the basis of results of the measurements registered in frontal barrier impact and the frame-by-frame analysis of videos recorded during the course of experiment. Courses of these diagrams were associated with acceleration measurement results and forces affecting the parts of the dummy. The experiment showed the complex nature of the influence on the dummy caused by the forces of inertia after a collision of the vehicle with an barrier, vehicle body motion against the frame, reactions in the safety belts, friction on a seat and contact reaction of the vehicle interior equipment. At the same time, it presented the possibilities of indicating the courses of speed variations and dummy displacement as well as significant limitations of calculation possibilities that result from a fact that the process of the impact on the vehicle interior elements is hard to describe.
Źródło:: Journal of KONES; 2011, 18, 1; 491-502
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The analysis of the influence of the rear seat passenger position on the kinematics and dynamic loads on a torso and legs during a road accident
Autorzy:: Prochowski, L.,
Żuchowski, A,
Powiązania:: https://bibliotekanauki.pl/articles/245281.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
vehicle safety
crash tests
safety of passengers
rear seat
Opis:: The analysis carried out by the authors indicates high threat to the rear seat passengers in passenger cars during a road accident. Vehicle designers indicate potential threats for passengers when they take a position in a car which is unexpected by a manufacturer of passive protection systems. Based on that, the tests were prepared in order to consider several different positions of a rear seat passenger. In particular, attention was paid to a threat to passengers when they take a position unexpected by a manufacturer of the passive protection systems in a car. Indicating and justifying a need to adjust the operation of the individual protection means to a passenger anatomy and current passenger position in a car in order to optimize his protection makes an important aim of these tests. This paper presents the results of the tests performed with a Hybrid III dummy, size M50, placed in three different positions in the back seat of a car. During each test, a series of physical values were measured and the motion of a dummy against the car body and the car interior components were filmed. The effects resulting from a change of a passenger’s position, observed on the courses of dynamic loads occurring during an accident, were analysed. Despite of small changes to a passenger’s position, their significant influence on the dummy movement during a frontal collision of a car and an obstacle was observed.
Źródło:: Journal of KONES; 2013, 20, 2; 335-342
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Investigation of human body exposed to blast wave derived from improvised explosive devices
Autorzy:: Sławiński, G.
Dziewulski, P.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/246647.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vehicle safety
mine resistance
improvised explosive device
occupant safety
FEM analysis
Opis:: The analysis of contemporary military conflicts shows, that the most dangerous threat for soldiers are Improvised Explosive Devices (IEDs). Blast resistance of military vehicles and structures is broadly discussed in many articles. However, information about human body response to impact loading is hard to find and very general. Both experi-mental trials with dummies and numerical analyses are needed. To design and develop better protection system it is necessary to identify and measure the effects of blast wave impact on crew of military vehicle. This paper presents numerical simulation results of special armoured vehicle subjected to mine threat of 8 and 10 kg of TNT. Possible effects of mine explosion on human body are described. Review of modern-mine and IED countermeasure solutions is presented. The analysis is conducted using LS-DYNA explicit code. Only vehicle’s hull is considered with suspension and turret is modelled using mass. Gravity is taken into account. Numerical model of Hybrid-III dummy is used. Accelerations and forces in tibia, neck and spine were calculated. HIC-36 criterion was also evaluated Different types of possible seat configuration are examined. Results show convergence between explosive size and injury risk.
Źródło:: Journal of KONES; 2015, 22, 4; 287-294
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Risk of injury for the front and rear seat passengers of the passenger cars in frontal impact
Autorzy:: Żuchowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/246867.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
vehicle safety
crash tests
safety of passengers
rear seat
Opis:: The dynamic loads acting on a human body during a road accident may cause bodily injuries. They are dependent not only on the car structure and applied means of individual protection but also on the anthropometric features of a human body and its location in car. The safety of the car occupants on the rear seats in the passenger cars has been treated as a secondary issue so far. The achieved stage of the structure of that equipment for the rear seat occupants makes an important confirmation of that state. Usually there is no adjustment of the seat belt fixing point position, seat belt pretensioners, seat adjustment. This paper considers the risk of injury for the front and rear seat passengers of the passenger cars on the basis of analysis of dynamic loads that can affect them during the road accident. The attention was paid to the adults and children aged about 10 years. The dynamic loads were analysed with making use of experimental results of frontal flat barrier impact. During the tests, the passengers are protected by typical passive safety systems on the front and the rear seats. In the evaluation used the criteria of the biomechanical human body resistance to the impact load effect. The attention is paid to relations between a seat occupied in a car and the probability of injuries. The analysis of the laboratory impact tests was preceded by the assessment of risk of injury of the front and rear seat passengers in the real road accidents, which has been prepared based on the literature data.
Źródło:: Journal of KONES; 2012, 19, 3; 507-518
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Analysis method of fire hazard of fuel oil and diesel oil systems in sea vessels engine rooms
Autorzy:: Charchalis, A.
Czyż, S.
Powiązania:: https://bibliotekanauki.pl/articles/247134.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fire hazard
safety of sea vessel
safety of vessels engine rooms
Opis:: This paper presents theoretical model for fire hazard analysis in fuel oil and diesel oil systems in engine rooms. The model is based on the probabilistic calculus and covers a 'fire tree' and formulas to calculate fire frequencies. Preliminary assumptions and initial frequencies calculation parameters have been adopted on the basis of statistical data. Fire sources identification involves selection of definite number of system elements, the damages of which may result in flammable liquid leakage and self-ignition. Such elements as, inter alia, pipelines joints and sections, valves and system equipment, are taken into consideration. With the use of the model, it is possible to calculate individual fire frequencies for individual self-ignition sources, and synthetic risk in systems and specific rooms. The calculations account for a possibility of introducing construction changes of safety equipment that influence the risk, e.g. number of detectors, fire extinguishing nozzles (fire extinguishers), leakage protection, etc. The method can be used to analyze the influence of fire construction protection on the risk (so-called 'risk sensitivity' testing) in the phase of creating requirements. However, for its quantitative verification statistical data concerning engine rooms fire hazard is essential. It may be assumed that creating an adequate calculation model for the purpose of a general fire hazard analysis of an engine room (of a vessel) is a significantly bigger challenge.
Źródło:: Journal of KONES; 2011, 18, 2; 57-62
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Numerical study on the modification effect of the seat load acting on a soldier during the blast wave derived from IED explosion
Autorzy:: Sławiński, G.
Dziewulski, P.
Niezgoda, T.
Malesa, P.
Powiązania:: https://bibliotekanauki.pl/articles/241536.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vehicle safety
mine resistance
Improvised Explosive Device
occupant safety
FEM analysis
Opis:: The structure of a vehicle located in the explosion area of an anti-vehicle mine or an IED is subject to a strong impact of a blast wave. The explosion of a mine produces a blast wave that travels in all directions at a speed greater than the speed of sound. The level of risk to the crew of a military vehicle depends on their distance from the place of detonation, on the vehicle’s design and in particular on the design of the bottom of the hull and on the assembly and type of seats. The article provides the analysis of the impact of a side explosion on the crew of an armoured vehicle. Since the new classified version of the AEP-55 document, which defines the conditions for testing the resistance of military vehicles to explosions affecting their side, is not available, it was assumed in the numerical analysis that the charge weight of the explosive device is 100 kg TNT, placed between the central vehicle axles at the distance of 400 mm from the bottom and 1,000 mm from the lower board. Two cases were analysed: one where the Hybrid III dummy was placed on the reference seat and the other where it was placed on a modified seat. The analysis is conducted using the LS-DYNA explicit code. Only the vehicle’s hull is considered with suspension and the turret is modelled with mass.
Źródło:: Journal of KONES; 2016, 23, 3; 465-472
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "safety." wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język