Temat: rotor loads - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Simulation investigation of rotor loads and blade deformations in steady states and at boundaries of helicopter flight envelope
Autorzy:: Stanisławski, J.
Powiązania:: https://bibliotekanauki.pl/articles/246484.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: helicopter
rotor loads
blade deformation
Opis:: Results of calculation of the helicopter main rotor loads and deformations of rotor blades are presented. The simulations concern level flight states and cases of boundary flight envelope such as wind gust, dive recovery and pull-up manoeuvre. The calculations were performed for data of the three-bladed articulated rotor of light helicopter. The method of analysis assumes modelling the rotor blades as elastic axes with sets of lumped masses of blade segments distributed along radius of blade. The model of deformable blade allows flap, lead-lag and pitch motion of blade including effects of out-of-plane bending, in-plane bending and torsion due to aerodynamic and inertial forces and moments acting on the blade. Equations of motion of rotor blades are solved applying Runge-Kutta method. Parameters of blade motion, according to Galerkin method, are considered as a combination of assumed torsion and bending eigen modes of the rotor blade. The rotor loads, in all considered cases of flight states, are calculated for quasi-steady conditions assuming the constant value of the following parameters: rotor rotational speed, position of the main rotor axis in air and position of swashplate due to rotor axis which defines the collective and cyclic control pitch angle of blades. The results of calculations of rotor loads and blade deflections are presented in form of timeruns and as distributions on rotor disk due to blade elements radial and azimuthal positions. The simulation investigation may help to collect data for prediction the fatigue strength of blade applying results for steady flight states and for definition the extreme loads for boundaries of helicopter flight envelope.
Źródło:: Journal of KONES; 2017, 24, 2; 239-246
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Simulation of boundary states of helicopter flight
Autorzy:: Stanisławski, Jarosław
Powiązania:: https://bibliotekanauki.pl/articles/245041.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: helicopter
boundary flight
rotor loads
Opis:: Results of simulation of main rotor blade loads and deformations, which can be generated during boundary states of helicopter flight, are presented. Concerned cases of flight envelope include hover at maximum height, level flight at high velocity, pull-up manoeuvres applying cyclic pitch and mixed collective and cyclic control. The simulation calculations were executed for data of light helicopter with three-bladed articulated rotor. For analysis, the real blades are treated as elastic axes with distributed masses of blade segments. The model of deformable blade allows for out-of-plane bending, in plane bending, and torsion. For assumed flight state of helicopter, the equations of rotor blades motion are solved applying Runge-Kutta method. According to Galerkin method, for each concerned azimuthal position of blade the parameters of its motions are assumed as a combination of considered bending and torsion eigen modes of the blade. The loads of rotor blades generated during flight depend due to velocity of flight, helicopter mass, position of rotor axis in air and deflections of swashplate that correspond to collective and cyclic pitch angle applied to rotor blades. The results of simulations presenting rotor loads and blade deformations are shown in form of timeruns and as plots of rotor-disk distributions. The simulations of helicopter flight states may be useful for prediction the conditions of flight-tests without exceeding safety boundaries or may help to define limitations for manoeuvre and control of helicopter.
Źródło:: Journal of KONES; 2019, 26, 2; 137-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Simulation investigation of operational conditions of rotor for high-speed compound helicopter
Autorzy:: Stanisławski, J.
Powiązania:: https://bibliotekanauki.pl/articles/245640.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: compound helicopter
rotor loads
blade deformation
helikopter
obciążenia wirnika
deformacja ostrza
Opis:: The article presents results of simulations concerning possibilities of rotorcraft performance enhancements for compound helicopters with introduced additional wings and propellers. The simple model of helicopter including a point mass of fuselage and a rotor treated as a disk was used for calculations of helicopter flight equilibrium conditions. For the defined flight states, the more detailed model of elastic blade was applied to compute magnitude of rotor loads and level of blade deformations. The model of elastic blade includes out-of-plane bending, in plane bending, and torsion effects due to variable aerodynamic and inertial loads of rotor blades. Equations of motion of rotor blades are solved applying Runge-Kutta method. Taking into account Galerkin method, parameters of blade motion are computed as a combination of assumed torsion and bending Eigen modes of the rotor blade. The six-bladed rotor with stiff connections of blades and hub was applied for comparison of flight envelope for conventional helicopter and versions of compound rotorcraft with additional propellers and with wings and propellers. Simulations indicate that, in the case of compound helicopter configuration, achieving the operational flight conditions at high speed of 400 km/h is possible without generating excessive loads and blade deformations. The results of calculations of rotor loads and generated blade deflections are presented in form of time-run plots and as rotor disk distributions, which depend on radial and azimuthal positions of blade elements. The simulation Keywords: compound helicopter, rotor loads, blade deformation 1.Introduction For classical configuration of helicopter, with main rotor and anti-torque tail rotor, the speed of flight is limited in comparison to fixed wing aircraft. The maximum speed of conventional helicopter is restricted due to high drag associated with compressibility effects for advancing rotor blade and stall phenomenon, which occurs at retreating blade zone. A compound helicopter configuration with added lifting wings and separate source of thrust for propulsion may help to unload main rotor and enhance speed range of rotorcraft. Initial development programs of compound helicopters [6], such as the Bell 533, the Lockheed XH-51A fitted with wings and additional turbojet engines, or the Lockheed AH-56A Cheyenne with wings and pushing propeller and after flight tests were not passed to serial production. Emerging demands for improved performance and progress in composite materials and aerodynamics of rotor blades gave impulse to return to compound helicopter concept. In the last decade, the new experimental compound helicopters with additional propulsion were tested [3]: the American Piasecki X-49 Speedhawk, the Sikorsky X2 and the French Eurocopter X3. It should be mentioned that the Eurocopter X3 achieved speed of 472 km/h setting an unofficial speed record for propeller helicopters. Analytical and experimental researchworks were performed to examine features of compound helicopters, which included effects of varying main rotor tip speed [1], wing-rotor lift share [7, 8] and investigation of dynamic stability characteristics [2]. Basing on collected experiences, the next generation of operational compound helicopter designs are being developed. The American Sikorsky S-97 Raider made the maiden flight in 2015 [4] and the European Airbus Helicopter Racer’s configuration was revealed in 2017 [5]. investigation may help to define demands for rotor of high-speed helicopter.
Źródło:: Journal of KONES; 2018, 25, 1; 363-370
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Modelling of helicopter main rotor aerodynamic loads in manoeuvres
Autorzy:: Kowaleczko, Grzegorz
Leśniczak, Andrzej
Powiązania:: https://bibliotekanauki.pl/articles/241695.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: helicopter
main rotor
aerodynamic loads
Opis:: The article discusses the method of modelling of the helicopter main rotor aerodynamic loads during steady state flight and manoeuvres. The ability to determine these loads was created by taking into account the motion of each blade relative to the hinges and was a result of the applied method of aerodynamic loads calculating. The first part of the work discusses the basic relationships that were used to build the mathematical model of helicopter flight. The focus was also on the method of calculating of the aerodynamic forces generated by the rotor blades. The results of simulations dedicated to the "jump to hover" manoeuvre were discussed, showing the possibilities of analysing aerodynamic loads occurring in unsteady flights. The main rotor is considered separately in an “autonomous” way and treated as a source of averaged forces and moments transferred to the hub. The motion of individual blades is neglected, and their aerodynamic characteristics are radically simplified. The motion of individual blades is neglected, and their aerodynamic characteristics are radically simplified. This can lead to significant errors when attempting to model dynamic helicopter manoeuvres. The more complex model of helicopter dynamics is discussed.
Źródło:: Journal of KONES; 2019, 26, 4; 273-284
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "rotor loads" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język