Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "propulsion system vibrations" wg kryterium: Temat


Wyświetlanie 1-2 z 2
Tytuł:
Kinematic of marine piston-crankshaft system
Autorzy:
Murawski, L.
Powiązania:
https://bibliotekanauki.pl/articles/246452.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine propulsion system
piston-crankshaft kinematic
slow speed engines
inertia forces
propulsion system vibrations
Opis:
Two-stroke, slow speed main engines are often installed on merchant ships, because of its very high efficiency. That kind of engine has an output of about 5500 kW per cylinder. The mass of piston-crankshaft system reaches over a dozen tons. That reciprocating masses are source of high level of dynamic inertia forces (mass forces). Those forces have big influence on engines working parameters and characteristics. One of them is instability of crankshaft rotational speed, which leads to dangerous torsional vibrations of propulsion system. Some inconsistency can be observed during analysis of piston-crankshaft system kinematic. In the theoretical engine books, the piston speed and acceleration has only two harmonic components, the inertia forces are depended on engine rotation speed and they doubled rotation speed. However, empirical formulas, published by engines producers, give us at least five harmonic components of mass forces. The author tries to find out the theoretical reason of existing (measured) higher harmonic orders of engines inertia forces. It is a first step for developing monitoring system of propulsion system’s torsional vibrations coupled with axial vibration, dynamic shaft line alignment and crankshaft springing. In the paper two analytical methods of piston displacement, speed and acceleration are presented. Well-known (from literature) equations are compared with more-detailed analytical procedures. The analysis was performed for one of the biggest marine MAN B&W engine, type 7K98MC. A discussion about the analysis results was included in the final part of the paper.
Źródło:
Journal of KONES; 2015, 22, 2; 155-162
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostic of the piston rod gland’s failure of marine slow speed main engine
Autorzy:
Murawski, L.
Van Doan, D.
Powiązania:
https://bibliotekanauki.pl/articles/244395.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine propulsion system
slow-speed main engine
failure of piston-crankshaft system
diagnostic based on vibrations
displacement
stress level
Opis:
The article presents untypical diagnostic of the slow-speed, marine main engine. The engine was newly made-up and checking during mounting process and during sea trial. However, a leak under piston chamber of second cylinder along the piston rod appeared few days after the sea trial. The stuffing box exchange (with the piston rod’s regeneration) did not give expected results − the failure happened again. All geometrical and exploitation parameters was in acceptable range. The ship with main engine was fifth in the series of sister ships. The authors were asked for urgent expert opinion. Mix of different measurements was planned after formulation several hypothesis. Displacements of piston rod and cylinder, a stress level of main engine body, and vibrations level in different points of main engine was performed during short sea voyage. Not a single hypothesis can be considered as the main cause of the failure. It turns out, that a serious failure need not be caused by a single reason. According to snowball theory a sum of small effects, each of them affecting slightly the engine operation, can be a cause of serious failure. In the authors’ opinion, the failure was caused by a sum of relatively slight effects. The probably scenario of the failure process was enunciated. The recommendation for the engine project was formulated: some of the geometrical tolerances should be changed.
Źródło:
Journal of KONES; 2017, 24, 4; 203-210
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies