Temat: load distribution - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The influence of the microgrooves on the hydrodynamic pressure distribution and load carrying capacity of the conical slide bearing
Autorzy:: Czaban, A.
Powiązania:: https://bibliotekanauki.pl/articles/246488.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: conical slide bearing
pressure distribution
microgrooves
Reynolds equation
load carrying capacity
Opis:: The aim of this work is to determine the hydrodynamic pressure distribution in oil film and the load carrying capacities of conical slide micro bearings with grooved sleeves. The results for some bearings examples are presented. For the bearings taken into account, the Reynolds equation was solved by the method of Finite Differences. In the calculations, the Reynolds boundary condition was applied. The simulation was performed for the conical slide micro bearings with the groves parallel to the cone generating line. The function of lubrication gap height for the conical slide bearings with sleeves covered with microgrooves was assumed on the basis of existing papers. The results obtained for the analogous bearings without the microgrooves are also shown, therefore the influence of microgrooves on the conical slide micro bearings can be observed. On the basis of the results, one can conclude, that applying microgrooves on the bearing sleeve surface causes the increase of the value of hydrodynamic pressure and longitudinal and transverse components of the load carrying capacity of the bearing. Furthermore, the effect of the microgrooves and their impact is noticeable in graphs of hydrodynamic pressure distribution. The applied method of investigation of the impact of microgrooves on a bearing operation is simpler and less expensive than the experimental studies, however it is necessary to verify that the results obtained with this method are correct and whether in fact applying microgrooves, besides form facilitate lubrication, causes the improvement in bearing operating parameters.
Źródło:: Journal of KONES; 2012, 19, 3; 85-91
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The influence of oil’s exploitation time on load carrying capacity in a slider bearing
Autorzy:: Sikora, G.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/244279.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: oil ageing
numerical calculations
Reynolds equation
pressure distribution
load carrying capacities
viscosity changes in time
Opis:: In this paper, authors are presenting conclusions of the numerical calculations of pressure distribution and capacity in a slider bearing with taking changes of oil viscosity in exploitation time into account. Changes of the engine oil’s viscosity, which depend on the exploitation time, were determined on Haake Mars III rheometer and the conclusions were published in Solid State Phenomena and Logistyka in 2015. Numerical calculations were performed by solving of Reynolds equation, using finite difference method and own calculation procedures in Mathcad 15. Reynolds equation was developed by solving the continuity equation and the momentum conservation equation from the fundamentals. For the considerations, the laminar and stationary lubricating of the slider bearing of finite length and full angle of wrap were taken. Assumption of the stationary flow concerns lack of changes in flow parameters in short period of considered phenomena, f. ex. in one hour. Smooth and non-porous bushing were assumed. The aim of this paper was preliminary estimation of influence of viscosity changes in the exploitation time on the load carrying capacities of the cross slider bearing. Wherefore, the viscosity changes dependence on the pressure, temperature and also shear rate, were not taken into account. The basic equations were developed to the non-dimensional form and estimated according to the thin layer theory. In the calculations, the Reynolds boundary conditions concerning pressure distribution were taken into account. Preliminary calculations were performed for different models of viscosity changes in time and circumstances, where the viscosity increases and decreases in exploitation time.
Źródło:: Journal of KONES; 2015, 22, 3; 207-212
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "load distribution" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język