Temat: hydrodynamic load - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Carrying capacity and friction forces in a transverse journal bearing, lubricated with non-Newtonian oil
Autorzy:: Miszczak, A.
Sikora, G.
Powiązania:: https://bibliotekanauki.pl/articles/243066.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: slide journal bearing
hydrodynamic pressure
load carrying capacity
friction force
non-Newtonian oil
Opis:: In this article, the authors present the results of numerical calculations. Calculations concern dimensionless carrying capacity and friction forces in a transverse journal bearing, lubricated by the oil of non-Newtonian properties. For analytical-numerical considerations a model of apparent viscosity changes based on exploitation time, pressure, temperature, shear rate was assumed The non-Newtonian properties of lubricating oil were characterized by increasing viscosity with increasing shear rate and described as an additional part in the constitutive equationβ3·tr(A1 2)A1. Analytical-numerical calculations were performed for smooth, non-porous plain bearing with full angle of wrap. Non-isothermal, laminar and fixed flow of lubricant in the lubrication gap of the journal bearing was assumed. Numerical calculations of hydrodynamic pressure distribution were made for Reynolds boundary conditions. The finite difference method was used to determine the Reynolds equation and the successive approximation method by taking into account the influence of pressure, temperature and non-Newtonian properties on the change of apparent viscosity. The results of the calculations are presented in the form of graphs and tables illustrating the influence of relative eccentricity and pressure, temperature and non-Newtonian properties on changes in the dimensionless load and friction force. Analysis of the obtained results illustrates the high-pressure effect on the increase of the carrying capacity and friction force for high relative eccentricities. A similar situation is by considering the non-Newtonian properties.
Źródło:: Journal of KONES; 2017, 24, 3; 203-210
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Operating parameters of a slide bearing with parabolic-shaped slide surfaces with consideration of the stochastic changes in the lubrication gap height
Autorzy:: Miszczak, Andrzej
Wierzcholski, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/244155.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: hydrodynamic lubrication
analytical stochastic principles
solutions
apparent viscosity
numerical calculation
load carrying capacity
friction force
Opis:: In this article, the authors present the equations of the hydrodynamic theory for a slide bearing with parabolicshaped slide surfaces. The lubricating oil is characterized by non-Newtonian properties, i.e. an oil for which, apart from the classic oil viscosity dependence on pressure and temperature, also an effect of the shear rate is taken into account. The first order constitutive equation was adopted for considerations, where the apparent viscosity was described by the Cross equation. The analytical solution uses stochastic equations of the momentum conservation law, the stream continuity and the energy conservation law. The solution takes into account the expected values of the hydrodynamic pressure EX[p(ϕ,ζ)], of the temperature EX[T(ϕ,y,ζ)], of the velocity value of lubricating oil EX[vi(ϕ,y,ζ)], of the viscosity of lubricating oil EX[ηT(ϕ,y,ζ)] and of the lubrication gap height EX[εT(ϕ,ζ)]. It was assumed, that the oil is incompressible and the changes in its density and thermal conductivity were omitted. A flow of lubricating oil was laminar and non-isothermal. The research concerned the parabolic slide bearing of finite length, with a smooth sleeve surface, with a full wrap angle. The aim of this work is to derive the stochastic equations, that allow to determine the temperature distribution, hydrodynamic pressure distribution, velocity vector components, load carrying capacity, friction force and friction coefficient, in the parabolic sliding bearing, lubricated with nonNewton (Cross) oil, including the stochastic changes in the lubrication gap height. The paper presents the results of analytical and numerical calculation of flow and operating parameters in parabolic sliding bearings, taking into account the stochastic height of the lubrication gap. Numerical calculations were performed using the method of successive approximations and finite differences, with own calculation procedures and the Mathcad 15 software.
Źródło:: Journal of KONES; 2019, 26, 4; 171-178
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Operating parameters of slide micro – bearings with consideration of oil temperature changes and micro - grooves on sleeve surface
Autorzy:: Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/247490.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: HDD micro-bearings
micro-grooved surfaces
oil viscosity changes in gap height
hydrodynamic pressure
friction forces
load carrying capacity
Opis:: In this paper author presents results of numerical calculations of hydrodynamic pressure distribution in bearing gap, load-carrying capacity, friction force and friction coefficient of slide micro-bearing considering the influence of lubricating oil temperature changes and also taking into account the influence of micro-grooves, which occur on sleeve internal surface. The micro-grooves on that surface are in longitudinal direction. The equation, which describes a bearing gap with micro-grooves on sleeve surface, was adopted from prof. K Wierzcholski's investigations. In very thin gap height of cylindrical micro-bearings, large gradients of temperature can be observed. This causes significant changes of oil dynamic viscosity in the gap height direction. According to this, oil flow velocity, friction forces, and a hydrodynamic pressure during the micro-bearing operation are changing. Up to now the influence of temperature on oil viscosity changes and due to this, on hydrodynamic pressure and on load carrying capacity in cylindrical micro-bearing gap in numerical way were not considered yet. The numerical calculations were performed with the use of Mathcad 14. The finite differences method and own computational procedures were implemented. The calculations were begun by solving the Reynolds' equation, assuming, that the dynamic viscosity is constant. After calculating the hydrodynamic pressure distribution, the temperature distribution in lubricating oil was determined. The obtained function of temperature was used to describe the viscosity changes with temperature. Next step involved determining the hydrodynamic pressure distribution taking into account the viscosity dependence on temperature, and then new distribution of temperature and again new values of viscosity were calculated. Calculations were repeated until assumed convergence and accuracy were reached. The friction force depends on pressure gradient and rotational motion of bearing journal. Part of friction force, which resulting from the pressure gradient, is determined for the area, where the oil film occurs, i.e. from omega p to omega k. Part of friction force, which is related to journal motion, is determined for full wrap angle, i.e. from 0 to 2 pi. The results were presented in the form of graphs, for eccentricity ratio gamma from 0.1 to 0.9, for dimensionless length of the bearing L1=1/4. In numerical calculations were used the theoretical considerations and solutions presented in papers of K. Wierzcholski and A. Miszczak.
Źródło:: Journal of KONES; 2012, 19, 2; 329-336
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "hydrodynamic load" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język