Temat: fuel direct injection - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental investigations in direct injected SI two-stroke engine
Autorzy:: Mitianiec, W.
Forma, M.
Rodak, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/246360.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
combustion engines
direct fuel injection
Opis:: The paper presents the latest experimental results of smali power two-stroke engine with electronic controlled high pressure direct fuel injection. The work is one of the first solutions in such engines in Poland and was provided on industrial engine with capacity 115 cm3. A special experimental eąuipment and electronic control of fuel dose and injection phases enables to obtain a big decrease of specific fuel consumption and exhaust gas emission, particularly hydrocarbons with the same level of torque. Applying of direct injection in small power two-stroke engine gives possibility tofulfil exhaust emission reguirements. The paper presents the experimental stand and fuel injection system with results of main engine parameters and emission of chosen chemical components. The configuration of injection system was designed on the basis of previous simulation test in GT-Power and KIVA3V. Earlier fuel injection influences on better evaporation and mixture formation with small stratification, which enables full mixture combustion. Direct fuel injection in two-stroke engine decreases hydrocarbon emission 10 times and specific fuel consumption about 30% in comparison to carburetted engine. Exhaust gas emission is on level off our stroke engines with low emission of NOx. The engine was equipped with conventional automotive injector, which was not suited to small cylinder capacity. . On the basis of the simulations and experimental tests a main conclusion can be drawn, that the spray guided direct fuel injection is a way to obtain cleaner and more effective two-stroke engine for small power units.
Źródło:: Journal of KONES; 2010, 17, 2; 335-342
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Thermodynamic aspects of combustion in gasoline engines fitted with a multiple fuel injection
Autorzy:: Wislocki, K.
Pielecha, I.
Maslennikov, D.
Czajka, J.
Powiązania:: https://bibliotekanauki.pl/articles/247068.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: direct injection
combustion engines fuel dose
rapid compression machine
Opis:: The multiple fuel injection is being applied not only in diesel engines but in direct injection gasoline engines as well. The injection duration in gasoline engines is similar (pressure values at present approx. 20 MPa) to the injection duration of diesel fuel. The methodology and results of the tests related to the fuel dose division and injection strategy on the thermodynamic indexes during the combustion process have been presented in the paper. The tests were performed for several ways of fuel dose division at injection pressures of 5, 10 and 20 MPa (modifying also the time of the injection). The paper presents: state of research on the effects of multiple injection in gasoline engines, research equipment and methodology when applying the Rapid Compression Machine, estimation of the thermodynamic indexes, injection strategies, influence of injection pressure on the thermodynamic indexes, single fuel dose, two-phase fuel injection, three-phase fuel injection, changes in the combustion pressure, changes of the average thermodynamic temperature of the charge in the cylinder, heat release rate, heat release and relative value of the heat used for strategies, the influence of the fuel injection pressure on the course of the combustion in a Rapid Compression Machine including the course of the heat release.
Źródło:: Journal of KONES; 2011, 18, 4; 543-553
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Effects of using a dual-injector fuel system on a process of combustion in a spark-ignition engine
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246083.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
gasoline
direct injection
port injection
combustion
spark-ignition engine
Opis:: This paper analyzes aprocess of combustion in a spark-ignition engine. The aim of the analysis was to determine the differences in the combustion process between the engine with a classic multipoint injection system and a system which injects fuel directly to the cylinders as well. To aid in the analysis the measurements of the high variable pressure in the engine's cylinder against the crankshaft angle were taken. This allowed us to obtain indicated diagrams for both types of engines. To eliminate distortions, both functions were approximated using combined functions. The other basic parameters were also measured: torque, RPM and instantaneous fuel consumption. The analysis of the indicated diagrams yielded an indicated mean pressure and thermal efficiency for both fuel systems. Then, a comprehensive analysis ofpressures in cylinders was performed in order to determine the way the flame spreads in the cylinder for the two types of engines. The results obtained from this analysis show that the speed of combustion is greater for the charge formed by the dual-injector fuel system. The increased speed of the combustion, especially when it reaches a 50% fraction of the exhaust gas in the cylinder, is what accounts for the increase in the indicated mean pressure and the increase in the thermal efficiency of the engine with a dual-injector fuel system. The time of the spreading of the flame, as well as the fast burn period were reduced. The increased efficiency of the combustion process in the cylinder me ans that the heat losses through the cylinder sleeve are greatly reduced. The results of the research in this paper confirm the purposefulness of using a dual-injector fuel system in a spark-ignition engine.
Źródło:: Journal of KONES; 2010, 17, 1; 389-397
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The influence of spray guided charge on possibility of stratified mixture formation in SI gasoline direct injection engine
Autorzy:: Sendyka, B.
Kudzia, S.
Powiązania:: https://bibliotekanauki.pl/articles/242770.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: SI engine
gasoline direct injection
spray guided
mixture stratification
fuel stream
Opis:: In this paper there has been described the structure of ZI gasoline direct injection engines in which there has been applied spray guided. There has been shown the burning chambers structure of the engines of that type. There has been also presented the modification range of ZI engines equipped with system of gasoline multipoint indirect injection in order to get the gasoline direct injection engine with spray guided. The authors have described the block diagram of fuel supply system of this type of an engine which is being developed in Cracow University of Technology's Combustion Engine Department. Certain information about mechanical modification of engine is given. They have proposed model of fuel air mixture stratification in a combustion chamber of spray guided engine, in which base homogeneous mixture come into being out of the this chamber. In this paper there has been also designated an influence of an angle of crank shaft on initial velocity of fuel stream and on flow intensity of fuel stream that flows through the injector. There also has been presented an influence of air fuel coefficient of homogeneous base mixture on the angle on a crank shaft of ignition charge.
Źródło:: Journal of KONES; 2007, 14, 4; 393-402
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Simulation of the work of a spark-ignition engine with a dual-injector fuel system
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246079.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
direct injection
port injection
combustion
spark-ignition engine
modelling
simulation
KIVA-3V
Opis:: This paper is about computer modelling of a four-stroke spark-ignition engine with a dual-injector system. Using a KIVA-3V program for Linux, computer simulations were performed for one of the cylinders fuelled by multipoint injection and by the dual-injector system, i. e. with direct injection into the cylinders on top of MPI. The modelling was done for a combustion engine Toyota 2SZ-FE with a dual-injector system. Both simulations were done for the same parameters of engine's work, i.e. at the same RPM of 2000 and the intake pipe pressure of 0.079 MPa. KIVA-3V program models the processes taking place in an internat combustion engine while taking into account physical and chemical phenomena occurring during the formation of a charge and during its combustion. Using a stochastic model of injection the program takes into account the movement of droplets and their dispersion. The results of the simulation show that the dual-injector system has an improved volumetric coefficient, i.e. improved engine performance. An increase in the engine's indicated pressure was also observed; this increases the engine's total efficiency. The intensification of the charge's angular momentum in a cylinder with a dual-injector system can explain the improvements in the course of combustion process. Because the air-fuel mixture was already partially formed in the engine there was a small increase in the unburned hydrocarbons in the cylinder. However, a marked drop in the carbon monoxide and nitric oxide were observed for the dual-injector system. Analyzing the overall results of the simulations one can ascertain a positive impact of using a dual-injector system on the working parameters of a spark-ignition engine.
Źródło:: Journal of KONES; 2010, 17, 1; 399-410
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: An impact of using a dual-injection system on a combustion engines working parameters
Autorzy:: Sendyka, B.
Noga, M.
Powiązania:: https://bibliotekanauki.pl/articles/246089.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dual-injector fuel system
MP1
direct injection
combustion
spark-ignition engine
experimental investigations
Opis:: The paper analyses the impact of using a dual-injection system on the engine's working parameters. The analysis is based on the results of the test stand research on a four-stroke four-cylinder, spark-ignition engine. Dual-injection system combines the multipoint injection with additional injection directly into the combustion chamber. It is used to increase the performance of an engine without affecting the fuel consumption or the low toxicity of exhaust gas. For the purposes of this research an engine from Toyota Yaris was fitted with the direct injection by installing high pressure injectors on the cylinder head. This engine is factory-equipped with MPL Based on the tests performed four controlling characteristics of the torque and brake specific fuel consumption were prepared. The controlling value was the proportion of the fuel injected into the inlet channel to the fuel injected directly into the combustion chamber. The same relationships were also described in relation to temperature of the exhaust gas and the fraction in volume in the exhaust gas of ingredients such as carbon monoxide, carbon dioxide, unburned hydrocarbons and nitric oxide. Points of measurement were decided upon basedon the existing literature on the subject. The analysis of the test results shows apossibility ofa 2-4% decrease in the brake specific fuel consumption for the dual-injection engine in the low and middle RPM range and for the partial loads. The dual-injection engine also shows a decrease in the nitric oxide's fraction in the exhaust gas and a lower temperature of the exhaust gas. There was a small increase in the carbon monoxide and hydrocarbons.
Źródło:: Journal of KONES; 2010, 17, 1; 379-388
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "fuel direct injection" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język