Temat: combustion temperature - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: NOx and extremely low temperatures of charging
Autorzy:: Hlavna, V.
Kadak, M.
Mruk, A.
Powiązania:: https://bibliotekanauki.pl/articles/243982.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: nitrogen oxides
theoretical analysis
extremely low temperatures
free enthalpy
combustion temperature
Opis:: The basis of basic research consists in the influence monitoring of unconventional (extremely low temperatures) charging intercooling on the selected ecological and economical parameters of a turbocharged internal combustion engine in the specific operational conditions (periodic starts and stops). The paper deals with the influence of the mentioned temperatures from the point of view of the harmful gaseous emissions production withfocus on NOx. The theoretical analysis, consequential mathematical modelling (in Fluent) of the utilizing of the extremely low temperatures of charging after the intercooler in the range from 30°C to near above zero temperatures of the turbocharged engine should define the changes trends in its power parameters and exhaust gas emissions production mostly NOx. At the same time it should consider the influence of the extremely low temperatures of charging on the engine inner corrosion at the periodic engine starts and stops. The mathematical model should allow alternatively solving possible risks resulting from the proposal newness and originality. From the proposal it is expected to obtain more effective energy utilization, the decrease of the environment ecological load compared with the standard solution and the possibility of creation of the permanent sustainable energetic system. The possibilities of the design solution for the system of extremely low temperatures of air fuel mixture are also presented in the paper.
Źródło:: Journal of KONES; 2010, 17, 3; 135-142
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Reduction of pressure rise rates in boosted HCCI engine using advanced valve actuation strategies
Autorzy:: Hunicz, J.
Rybak, A.
Gęca, M.
Powiązania:: https://bibliotekanauki.pl/articles/243727.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low temperature combustion
HCCI
valve actuation
combustion harshness
Opis:: Homogeneous Charge Compression Ignition (HCCI) is a promising low temperature combustion technology which offers high fuel efficiency and extremely low exhaust emissions. However, there are still some pending issues to be resolved before the technology will achieve mass production level. Namely, combustion controllability should be improved and HCCI operating range should be widen. The latter is constrained by excessive combustion rates under high loads. In this study, advanced variable valve actuation strategies were applied to control auto-ignition timings and combustion rates. The examinations were conducted using single-cylinder research engine fuelled with directly injected gasoline. The HCCI combustion was achieved using negative valve overlap technique. The engine was run under boosted conditions, in an operation regime where acceptable pressure rise rate (PRR) level is usually exceeded. Selected valve timing sweeps were carried out within a scope of the experiments to evaluate PRR reduction potential. The obtained results manifested superior combustion controllability. Late exhaust valve closing enabled reduction of the amount of internally re-circulated exhaust, which propagated to the main event combustion. From the intake side, two effects were observed, i.e. variability of the intake air aspiration and variability of the apparent compression ratio. Both phenomena were found to affect combustion timings and rates.
Źródło:: Journal of KONES; 2018, 25, 4; 369-376
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Influence of speed and load on the engine temperature at an elevated temperature cooling fluid
Autorzy:: Krakowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/243666.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
cooling system
coolant temperature
Opis:: In this article has been found that the most popular and widely used method of cooling is liquid cooling, which ensures uniformity of temperature around the combustion chamber and easy acquisition and transfer of heat, although the properties of water are limited by maximum temperature of the coolant. Preliminary scientific research of such a system indicates the possibility of increasing overall efficiency and reducing toxic components in exhaust gases at low engine loads when the engine exhaust temperature of the classic system is too low for efficient catalytic action. This paper presents the dynamometer test stand designed and built using original components of diesel engine 4CT90 production of WSW "ANDORIA" SA. Presented system was designed for the four cylinder with indirect fuel injection system. Research was made on the engine dynamometer stand, which was equipped with standard measure devices (measures: speed, torque, temperatures, flows) and exhaust gas analysers. The temperature of this liquid was increased to the higher level than temperature of boiling water in normal conditions. Overpressure inside the cooling system was limited to 0.3 MPa, the temperature inside the cooling system was increased to 115–120°C. During the test, the cooling system was filled with coolant at 90%. The selected results of investigations of the cooling system for the combustion engine working with higher temperature of the cooling liquid, where the influence of speed and load on the engine temperature were presented.
Źródło:: Journal of KONES; 2013, 20, 4; 185-192
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Multidimensional engine starting characteristics
Autorzy:: Pszczółkowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/949496.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: piston combustion engines
low temperature starting
Opis:: The difficulties in obtaining the start of piston combustion engines increase at low temperature conditions. Lowering abilities of a diesel engine to undertake the independent operating, at low temperature, result from its influence on exploitation materials, engine systems properties, and directly from low ering the temperature of sucked-up into the engine cylinders air. The successful engine start-up depends on three independent parameters: engine (and ambient) temperature, engine crankshaft rotational speed extorted by starting system and the time period at which this system is operating. An individual engine starting abilities measure can be the time of starter motor operating at aparticular temperature or its start-up limit temperature determined according to a specified research standard. The dependence of start-up time or start-up limit temperature on any particular factor is the engine starting characteristic. The combustion engine is a very complex object in respect of its starting abilities. If the engine constructionai adjustment and exploitation parameters are changed, the start-up characteristic (function) is a multi-dimensional function. Formally, from mathematical point of view, it is a surface in a multidimensional space. It is possible to obtain any engine starting characteristic by multidimensional starting surface intersection. In the paper there are presented examples of one- and multi- dimensional diesel engine starting characteristics as results of long-lasting starting tests of many engines.
Źródło:: Journal of KONES; 2010, 17, 3; 385-392
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Influence of the coolant temperature on emission of toxic compound and engine work parameters
Autorzy:: Walentynowicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/242404.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
cooling systems
higher coolant temperature
Opis:: The selected results of investigations of the cooling system for the combustion engine working with higher temperature of the cooling liquid were presented. The temperature of this liquid were increased to the temperature of boiling water, as a basic compound of the cooling liquid. This system was designed for the four cylinder diesel engine 4CT90 with indirect fuel injection system. Investigation was realized on the dynamometer stand equipped with standard measure devices (measures: speed, torque, temperatures, flows) and exhaust gas analyzers. The speed and torque engine characteristics were determined. The over pressure inside cooling system was limited up to 0.07 MPa regarding lower pressure structural integrity of the standard units of this system. Intensity of the cooling, protective against too higher pressure, were changed by switching small and full liquid circulation, and one or two fans of the cooler. temperature inside cooling system was increased up to 110 centigrade. Results ofincreasing of the cooler temperature were lower frictions of unburned products of combustion process (CO and HC) in the exhaust gas (up to 50%) in low torque and low engine speed. This is area when catalytic reactor does not work because too low is exhaust gas temperature. It wasfound that engine economy was increased to 7% in maocimum load and high engine speed.
Źródło:: Journal of KONES; 2009, 16, 1; 583-590
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Internal combustion engine cooling system with elevated coolant temperature research on the model test stand
Autorzy:: Krakowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/242843.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
engine cooling
test stand
coolant temperature
Opis:: In the paper a model test stand designed and built using original components of diesel engine 4CT90 is presented. The stand provides working conditions as close as possible to the exploitation conditions of the engine cooling system. This applies both to the intensity of heat inside the cylinders of the engine, the temperature uniformity along the cylinder axis, as well as variable-speed water pump. Research carried out on the model stand were aimed at checking the operation of the cooling intensity control with varying levels of filling of the cooling system and develop a control method of the cooling system before testing on the dynamometer stand. In addition, system operation at elevated cooling liquid pressure for the possibility of obtaining the elevated coolant temperature were checked. The influence of working conditions on the level of the temperature was also analysed. In this paper, the characteristics selected for two values of pressure, for 0.15 MPa and 0.2 MPa, and for two different values of the degree of filling of the cooling liquid were presented. During the warming-up and continuous heating of the cylinder and the cylinder head by electrical heaters, temperature and overpressure courses before and after the liquid radiator, temperature before the inlet and outlet of the liquid from the engine and the temperature at selected points inside the engine water jacket are designated. The results of measurements of the coolant pump flow at different speed water pump were also presented in this paper.
Źródło:: Journal of KONES; 2013, 20, 4; 177-183
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Engine researches on the influence of the piston ring insert on temperature distribution in piston
Autorzy:: Stężycki, P.
Kowalski, M.
Jankowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/949512.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
engine piston
piston ring insert
electromagnetic induction
temperature measurement
thermistor
Opis:: The article presents a method of piston temperature measurement on a running engine using electromagnetic induction for transferring measurement results from a moving measuring system placed in a piston to a stationary system attached to the engine crankcase and to measuring system located outside the engine. Selected test results that were carried out on a single-cylinder Diesel engine are presented. A system consisting of a thermistor and a secondary coil was mounted in the piston. The primary coil was mounted in the crankcase under the cylinder liner of the engine. Engine tests were aimed at determining the influence of the piston ring insert on the temperature distribution in the piston. Temperature measurements in the piston without the ring insert were carried out for comparison. In both cases, the pistons had the same geometrical dimensions. The tests were carried out in conditions of external characteristics (the maximum load as a function of engine speed) and load characteristics (load changes at constant engine speed). The test results in the form of the temperature difference between the temperature of piston top and the temperature under the top compression ring indicate that the ring insert is a barrier to the heat flow from the piston to the engine cooling system. In addition, the results of the piston temperature measurements during the step change of the engine speed and its load to the nominal value are presented.
Źródło:: Journal of KONES; 2018, 25, 4; 563-570
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Analysis of thermal and mechanical stresses of Renault Premium DXi11 460 EEV four-stroke piston
Autorzy:: Kaliszewski, M.
Mazuro, P.
Powiązania:: https://bibliotekanauki.pl/articles/245402.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: heat transfer
temperature distribution
four-stroke engine piston
finite element method
1D combustion
Opis:: In this article the engine piston Renault Premium DXi11 430 460 EEV has been analysed using the Finite Element Method. Analysis consider as well heat transfer phenomenon as the thermal and mechanical strains of the piston. Simulations were performed for the point of engine maximum power. Piston material was assumed to be 40HM (1.7225) steel and its properties are delivered basing on available scientific papers. The simulation assumed mean values of heat transfer coefficient, reference temperature and cycle pressure based on engine data, maximum power engine work simulation in AVL Boost software and literature. Part of boundary condition (e.g. cylinder wall temperature) was assumed basing on authors’ engineering intuition and experience. The resulting temperature distribution in the piston was implemented for geometrically nonlinear mechanical FEM analysis. Both the analysis of thermal stresses and stresses of the hot piston in the top dead centre were performed.
Źródło:: Journal of KONES; 2018, 25, 2; 169-175
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Investigation rheological properties of rapeseed oil methylesters and their blends with diesel fuels
Badanie właściwości reologicznych estrów metylowych oleju rzepakowego i ich mieszanin z olejami napędowymi
Autorzy:: Baczewski, K.
Szczawiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/243126.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silniki spalinowe
właściwości niskotemperaturowe
właściwości reologiczne w niskiej temperaturze
depresatory
combustion engines
alternative fuels
Rapeseed Oil Methylesters (RME)
low-temperature properties
rheological properties of low temperature
depressants
Opis:: The paper presents results of investigations of rheological properties (dynamic viscosity and shear rate) at low temperature and cold flow parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of rapeseed oil methylesters (RME), their blends with other fuels and RME with various flow improves additives (depressants). Common depressants for diesel fuels are less efficient with reference to RME. RME generally need other depressants than diesel fuels. The test results showed that common depressants used to improve the cold flow properties of petroleum-based diesel fuels can different effect on pour points and cold filter plugging points of rapeseed oil methylesters. About 1000 ppm of depressants is required to significantly improving of cold flow parameters of rapeseed oil methylesters. It was showed that blending arctic diesel fuel or aviation turbine fuel Jet A-l with rapeseed oil methylesters at rate of 10% (by volume) or more leads to significant improve in the rheological properties (dynamic viscosity and shear rate) of RME at the low temperature and cold flow parameters (Cloud Point, Cold Filter Plugging Point and Pour Point). Keywords: combustion engines, alternative fuels, Rapeseed Oil Methylesters (RME), low-temperature properties, rheological properties at low temperature, depressants.
W pracy przedstawiono wyniki badań właściwości reologicznych (lepkości dynamicznej i naprężeńścinających) w niskiej temperaturze oraz parametrów niskotemperaturowych (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia) estrów metylowych oleju rzepakowego (RME), ich mieszanin z innymi paliwami oraz RME z różnymi dodatkami (depresatorami) poprawiającymi te właściwości. Handlowe depresatory przeznaczone do olejów napędowych są mniej skuteczne w odniesieniu do RME. RME generalnie wymagają stosowania innych depresatorów niż ON. Wykazano, że handlowe depresatory stosowane do olejów napędowych pochodzenia naftowego wpływają inaczej na obniżenie temperatury zablokowania zimnego filtru i temperatury płynięcia estrów metylowych oleju rzepakowego. Do polepszenia parametrów niskotemperaturowych estrów metylowych oleju rzepakowego wystarczy dodanie depresatorów w stężeniu do 1000 ppm. Wykazano, że dodanie do estrów metylowych oleju rzepakowego oleju napędowego arktycznego oraz paliwa lotniczego Jet A-l w stężeniu 10% i więcej (objętościowo) znacznie poprawia właściwości reologiczne (lepkość dynamiczną i naprężenia ścinające) RME w niskiej temperaturze oraz parametry niskotemperaturowe (temperaturę mętnienia, temperaturę zablokowania zimnego filtru i temperaturę płynięcia).
Źródło:: Journal of KONES; 2007, 14, 3; 29-38
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Optimal parameters of engine systems operating during its heating after starting at low temperature
Optymalne parametry pracy układów silnika podczas nagrzewania w niskiej temperaturze
Autorzy:: Pszczółkowski, J.
Koliński, K.
Powiązania:: https://bibliotekanauki.pl/articles/243054.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silniki spalinowe
rozruch w niskiej temperaturze
zadymienie spalin
combustion engines
start-up at low temperature
smokiness of the exhaust gases
Opis:: The basic problem of combustion engine heating phase after its starting at low ambient temperature is emission of harmful for the environment exhaust gas components. Environment pollution by diesel engines is determined by exhaust gas smokiness which is measured using light extinction coefficient. Exhaust gas smokiness means outlet engine gas colouring by opaque components, absorbing or dissipating the light. As basic kinds of smoke, especially appearing at engine heating phase we can specify: white, black and blue smoke. There is made the analysis of methods of limitation the emission of harmful for the environment diesel engine exhaust gas components after its starting with special attention to possibilities of optimisation the operating parameters of some engine systems. There are presented the exhaust gas smokiness characteristics for the AD4.236 diesel engine during its heating as functions of chosen construction, adjustment and exploitation parameters. Before the smokiness measurement there was realised a starting attempt of the engine prepared according to the starting procedures standards. Exhaust gas smokiness was measured using absorption smokiness measuring instrument. There was made the identification of the factors causing engine smokiness under its warming-up: low temperature of fuel, lubricating oil, air, cylinder walls and there was pointed the possibility of harmful for the environment exhaust gas components emission limitation using thermostarts (or other means of engine start-up aiding).
Podstawowym problemem fazy nagrzewania silników spalinowych po uruchomieniu w niskiej temperaturze otoczenia jest emisja szkodliwych dla środowiska składników spalin. Zanieczyszczenie środowiska przez silniki o zapłonie samoczynnym jest determinowane przez stopień zadymienia ich spalin, którego miarą jest współczynnik ekstynkcji światła. Zadymienie spalin oznacza zabarwienie gazów wylotowych silnika przez składniki nieprzezroczyste, pochłaniające lub rozpraszające światło. Jako podstawowe rodzaje dymu, występujące szczególnie w fazie nagrzewania silnika, wyróżnia się: dym biały, czarny i niebieski. Dokonano analizy metod ograniczenia emisji szkodliwych dla środowiska składników spalin silników o zapłonie samoczynnym po uruchomieniu, ze szczególnym uwzględnieniem możliwości optymalizacji parametrów pracy wybranych układów silnika. Przedstawiono charakterystyki zadymienia spalin silnika typu AD4.236 podczas nagrzewania w funkcji wybranych parametrów konstrukcyjnych, regulacyjnych i eksploatacyjnych. Przed pomiarem dymienia wykonywano próbę rozruchu silnika przygotowanego zgodnie z procedurami badań rozruchowych. Pomiaru poziomu zadymienia spalin dokonywano za pomocą dymomierza absorpcyjnego. Dokonano identyfikacji czynników powodujących dymienie silnika w fazie nagrzewania: niska temperatura paliwa, oleju smarującego, powietrza, ścian cylindrów i wskazano możliwość ograniczenia emisji szkodliwych składników spalin poprzez stosowanie świec płomieniowych (lub innych urządzeń wspomagania rozruchu).
Źródło:: Journal of KONES; 2007, 14, 2; 373-380
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Investigation of impacting of aging processes on properties of biodiesel
Badanie wpływu procesów starzenia na zmianę właściwości biodiesla
Autorzy:: Baczewski, K.
Szczawiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/243169.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silniki spalinowe
paliwa alternatywne
starzenie
biodiesel
estry metylowe oleju rzepakowego (RME)
oleje napędowe
parametry niskotemperaturowe
combustion engines
alternative fuels
aging processes
Rapeseed Oil Methylesters (RME)
diesel fuels
low-temperature parameters
Opis:: W pracy przedstawiono wyniki badań laboratoryjnych procesów starzenia biopaliw (biodiesla), takich jak estry metylowe oleju rzepakowego (RME) i ich mieszanin z bazowym hydrorafinowanym olejem napędowym (HON). Określono wpływ powietrza, światła słonecznego, oddziaływania ciepła i obecności wody na zmianę liczby kwasowej, lepkości kinematycznej i parametrów niskotemperaturowych paliw (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia). Schemat starzenia próbek paliw, wpływ czasu i warunków starzenia na zmianę liczby kwasowej próbek badanych paliw, temperatura zablokowania zimnego filtru TZZF próbek paliw starzonych w różnych warunkach w ciągu 60 tygodni są zilustrowane w artykule. Stwierdzono, że najbardziej podatny na starzenie były estry metylowe oleju rzepakowego (RME) i bazowy hydrorafinowany olej napędowy. W rezultacie starzenia następuje bardzo duży przyrost liczby kwasowej, małe zmiany lepkości kinematycznej i bardzo małe zmiany parametrów niskotemperaturowych (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia) estrów metylowych oleju rzepakowego (RME). Najintensywniejsze starzenie estrów metylowych oleju rzepakowego (RME) powodują wymuszenia cieplne. Obecność wody intensyfikuje starzenie estrów metylowych oleju rzepakowego (RME), szczególnie przy długim czasie kontaktu.
The paper presents the results of laboratory investigations of aging processes of the biodiesel such as rapeseed oil methylesters (RME) and their blends with hydrofining based diesel fuels. The influence of air, light, elevated temperature and the presence of water on the total acid number, kinematic viscosity at 40°C and low-temperature parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of the fuels was determined. The aging of fuel samples, acid number as a function of time and conditions of aging for evaluated samples of fuels, and Cold Filter Plugging Point (CFPP) of fuel samples aging at different conditions during 60 weeks are illustrated in the paper. The least resistance to aging of rapeseed oil methylesters (RME) and hydrofining based diesel fuel was obtained. The aging influence dramatic increase in total acid number, little changes of the kinematic viscosity at 40°C and least changes of low-temperature parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of rapeseed oil methylesters (RME). The elevated temperature causes the largest impact on aging of rapeseed oil methylesters(RME). The aging of rapeseed oil methylesters (RME) is intensified in presence of water especially for long time of contact.
Źródło:: Journal of KONES; 2007, 14, 2; 27-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "combustion temperature" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język