Temat: combustion rate - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental investigations of various modes of charging on HCCI engine
Autorzy:: Prasad, A. Renuka
Bhandari, Rakesh
Jagadish, Donepudi
Powiązania:: https://bibliotekanauki.pl/articles/245191.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: HCCI technology
homogeneous mixture
thermal efficiency
combustion rate
emissions
Opis:: Homogeneous Charged Compression Ignition technology is most favourable or suitable for Internal Combustion engines for reducing the exhaust emissions and enhances the Thermal efficiency, improve the fuel consumption, and increase the rate of combustion. This article represents the various charging methods on HCCI technology engine; it improves the engine performance and determines the emission characteristics of HCCI technology engine. The homogeneous mixture prepared with different methods. In –cylinder internal homogeneous mixture preparation method applied in this present work. It reduces the exhaust emissions released from the combustion chamber. However, oxides of nitrogen and soot emissions are significantly reduce, because combustion starts at lower temperatures and various points in combustion chamber. The HCCI technology generates small amount of exhaust emissions and it improves the performance of the engine. In addition, performance and released emissions depends on the quality and quantity of homogeneous mixture.
Źródło:: Journal of KONES; 2019, 26, 1; 119-126
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Knock and combustion rate interaction in a hydrogen fuelled combustion engine
Autorzy:: Szwaja, S.
Powiązania:: https://bibliotekanauki.pl/articles/245975.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion knock
heat release rate
hydrogen
engine
Opis:: The paper describes correlation between combustion knock intensity and combustion rate calculated as the heat release rate from combustion pressure traces of a hydrogen fuelled spark ignited engine. Unlike a gasoline spark ignited (SI) engine, the hydrogen fuelled engine can easily generate knock during combustion at working conditions similar to a gasoline engine. However, the hydrogen knock does not necessarily come from hydrogen auto-ignition at the end phase of spark-controlled combustion process as it is typical at the gasoline fuelled engine. The phenomenon of hydrogen knock significantly differs from the gasoline knock due to different combustion mechanisms and different fuel thermo-chemical properties. The knock can be generated during hydrogen combustion itself as result of combustion instabilities. Intensity of this knock, expressed here by intensity of combustion pressure fluctuations, is several times lower in comparison with the combustion knock by fuel self-ignition process. This "light knock" is a matter of this paper. The tests of hydrogen combustion in the IC engine has been conducted at air to hydrogen stoichiometric ratio at various compression ratios with spark timing sweep from -10 to 4 crank angle degrees referring to top dead centre of the engine piston. Obtained results show, that there is a positive correlation between the knock intensity and the combustion rate. This correlation is particularly observed at tests taken on the engine with compression ratio of 10. The conclusions should provide good premises for combustion knock modelling and its prediction.
Źródło:: Journal of KONES; 2011, 18, 3; 431-438
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Thermodynamic analysis of combustion events in the natural gas fuelled SI engine with VVT
Autorzy:: Szwaja, M.
Mazuro, P.
Szwaja, S.
Powiązania:: https://bibliotekanauki.pl/articles/242837.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
variable valve timing
heat release rate
IMEP
combustion phases
Opis:: The main aim of the research was to investigate influence of overlap of the natural gas fuelled spark ignited engine on the following parameters: Indicated Mean Effective Pressure (IMEP), heat rate release including combustion phases (ignition lag, main combustion phase). The content of the study includes results from processing in-cylinder pressure measurements, heat release rate analysis, combustion phases, and finally the conclusions. The tests were carried out on the test bed including the single cylinder research engine with a displacement volume of 550 cm3. The engine was equipped with independent cam phasors for both intake and exhaust valves, but for this investigation, the exhaust valve timing was fixed (the exhaust cam centre line was fixed at -95 crank angle (CA) deg before Top Dead Centre) and intake valve timing was changed (the intake cam centre line was varied from 90 to 150 CA deg after Top Dead Centre). The overlap was changed in the range from 85 to 25 CA deg. 8 tests series were performed, each singular series consisted of 300 consecutive engine combustion cycles. As observed, by varying the valve overlap it contributes to significant change in the peak combustion pressure, peak of heat release rate, and combustion phases. Summing up, variable valve timing affects compression and expansion strokes by changing polytropic indexes due to various amounts of exhaust residuals trapped in the cylinder. It affects not only engine volumetric efficiency but also the heat release rate and IMEP, so it does engine performance. Thus, variable valve timing can be considered as valuable tool that can be applied to the natural gas fuelled internal combustion engine.
Źródło:: Journal of KONES; 2018, 25, 4; 421-427
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Fast heat release analysis for spark ignition engine
Szybka analiza procesu wydzielania ciepła w tłokowym silniku spalinowym o zapłonie iskrowym
Autorzy:: Mendera, K. Z.
Smereka, M.
Powiązania:: https://bibliotekanauki.pl/articles/245384.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silnik spalinowy
szybkość wydzielania ciepła
internal combustion engine
heat release rate
mass fraction burned analysis
Opis:: The development of the automotive engine is increasingly challenged by emission legislation and by the end-users' fuel economy demands. it requires new technologies as well as new ways to optimise and analyse engine processes. The best possible knowledge needed for the modeling and controlling an internal combustion engine may be received as a result of the thermodynamic analysis. such an analysis requires acquisition of the data on the in-cylinder pressure and volume, Thermodynamic properties (chemical composition), heat transfer and gas flows (crevice flows, blow-by effect) and therefore is sophisticated and labour-consuming. that is why it would be desirable to use comparable (in the fmal effect and precision) methods of heat release analysis, which would be faster and less demanding. a burn rate analysis applied to calculate mass fraction burned (MFB) is one of the solutions. This paper presents the results of the comparative analysis ofvarious heat release algorithms and recommends fast mfb method that is comparable with the sophisticated thermodynamic analysis — it offers the accuracy of the estimation of 50% mass fraction burn duration not worse than 0.5 crank angle degree.
Rozwój układów napędowych pojazdów w coraz większym stopniu uwarunkowany jest wymaganiami ochrony środowiska i minimalizacji zużycia paliwa. wymaga to nowych technologii w dziedzinie sterowania tłokowym silnikiem spalinowym. Dokładny obraz zjawisk zachodzących w komorze spalania otrzymać można w wyniku analizy termodynamicznej, która wymaga obok znajomości ciśnienia, będącego efektem procesu spalania i zmian objętości przestrzeni roboczej, także wiedzy o zmianach właściwości termofizycznych czynnika (zmiana składu chemicznego), wymiany ciepła oraz przepływów masy czynnika (efekt szczelinowy i przedmuchy), co czyni taką analizę skomplikowaną i pracochłonną. Pożądane byłoby więc opracowanie metody o porównywalnej dokładności, ale znacząco szybszej, nie wymagającej znajomości tak dużej liczby parametrów wejściowych. W opracowaniu tym skupiono się na porównaniu wyników uzyskiwanych poprzez zastosowanie różnych algorytmów i zaproponowano metodę, która w oparciu o minimalną liczbę danych, zapewnia zgodność położenia 50% ciepła wydzielonego z wynikami analizy termodynamicznej na poziomie nie gorszym niż plus minus 0,5° OWK.
Źródło:: Journal of KONES; 2009, 16, 4; 323-332
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "combustion rate" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język