Temat: Computer Aided Design - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Design and optimisation of exhaust system of light turboprop airplane
Autorzy:: Stalewski, W.
Powiązania:: https://bibliotekanauki.pl/articles/247804.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: turboprop aircraft
exhaust system
ejector
computer-aided design
optimisation
Opis:: Innovative exhaust system for light turboprop airplane has been developed and optimised. Apart from the basic function of removing exhaust from turboprop engine, the system supports cooling of the engine bay. To do this, the system removes hot air from the engine bay, utilising the ejector-pump effect, where the exhaust stream generates under-pressure, sucking the hot air through the ejector slot and removes the air together with the exhaust gases. The design and optimisation of the exhaust system has been conducted based on computational methods of Computer-Aided Design and Optimisation and Computational Fluid Dynamic. Three-dimensional analysis of flow around the airplane (including effect of propeller) and inside the exhaust system was conducted by application of URANS solver ANSYS FLUENT. Using these software the trajectories of exhaust particles, both inside the exhaust ducts and outside the airplane, have been determined. Parametric model of the designed exhaust system has been developed using the in-house software PARADES. As design parameters the diameter, length and direction of exhaust ducts as well as few parameters describing a shape of the ejector, have been established. The optimisation process aimed at designing of the exhaust system, which removes the exhaust gases possibly far away from the airframe, especially during a descent flight of the airplane. Additional objectives were maximisation of the mass flow rate of hot air sucked through the ejector and minimisation of the drag force generated by external part of the exhaust system. The optimised exhaust system should have also fulfilled requirements of permissible total-pressure losses inside the exhaust ducts. The optimised exhaust system has been implemented on the light turboprop airplane and validated during flight tests.
Źródło:: Journal of KONES; 2016, 23, 2; 341-348
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Design and optimisation of main rotor for ultralight helicopter
Autorzy:: Stalewski, W.
Powiązania:: https://bibliotekanauki.pl/articles/243641.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: rotorcraft
ultralight helicopter
main rotor
airfoil
computer-aided design
optimisation
Opis:: A modern main rotor, dedicated to the ultralight helicopter, has been designed and optimised. Due to assumed simplicity of the rotor design and taking into account some technological constraints, the principal purpose of the presented research was to design a dedicated airfoil which, when applied on the main-rotor blades, would influence satisfactory improvement in a performance of the ultralight helicopter, especially in fast flight. The design and optimisation process has been supported by a computational methodology. The in-house software has been used for direct and inverse design of shapes of the rotor-blade airfoils. Aerodynamic properties of the airfoils as well as the helicopter main rotor were evaluated based on both the two-dimensional and three-dimensional flow simulations conducted using the ANSYS FLUENT software that was used to solve U/RANS equations. Based on the results of conducted computational simulations of fast flight of the ultralight helicopter, it can be concluded that the newly designed main rotor, compared to the baseline, may give certain improvement in helicopter performance in fast flight. In addition, the application of this newly designed rotor may lead to increase of a maximum speed of the helicopter flight, due to the greater lift force achievable by this rotor on the retreating blade, which is favourable from point of view of keeping of a lateral balance of the helicopter in fast flight.
Źródło:: Journal of KONES; 2017, 24, 4; 287-295
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Computational design and optimisation of innovative, high-efficiency wind turbine
Autorzy:: Stalewski, W.
Zalewski, W.
Powiązania:: https://bibliotekanauki.pl/articles/246604.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: green power
wind turbine
computational fluid dynamics (CFD)
computer-aided design
optimisation
Opis:: New concept of innovative, high-efficiency wind turbine has been developed and optimised. The turbine consists of a rotor with a vertical axis of rotation and a ring-palisade casing, which task is to deflect wind stream so that it flows perpendicularly to the rotor plane. The main advantage of such configuration of a wind turbine is that due to the vertical axis of symmetry, it works independently on the wind direction and it does not need any mechanism directing it towards the wind. The greatest challenge when designing the turbine was to minimise losses of energy of the wind stream deflected by 90 degrees by the ring vanes of the casing. This involved optimisation of number, shapes and mutual positions of the ring vanes. The whole optimisation works were done based on computational methods of Computer-Aided Design and Optimisation and Computational Fluid Dynamic. Subsequent variants of the ring-palisade casing were designed using an appropriately adapted in-house-software package supporting design and optimisation of multi-element airfoils. Three-dimensional analysis of flow around and inside the casing was conducted by application of commercial URANS solver ANSYS FLUENT. Eventually designed turbine is characterised by high efficiency in respect of acceleration of the wind stream. On the basis of computer simulations, it is estimated that the average velocity of air stream flowing through the rotor plane may be higher than the wind speed by about 45%. Extent of the acceleration of the wind stream partially depends on the number of ring vanes comprising a casing. Depending on specificity of application, this number of ring vanes may be chosen by a compromise between performance and dimensions of the turbine. The proposed wind turbine seems to be very promising solution, especially within the area of small and moderate renewable-energy sources, which in particular may be placed directly in residential-building areas, e.g. on the roofs of houses. This type of renewable-energy sources may also be successfully used in the field of environmentally friendly transport, in the process of producing hydrogen as fuel for fuel cell vehicles.
Źródło:: Journal of KONES; 2015, 22, 2; 221-232
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Computer Aided Design" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język