Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kempa, A." wg kryterium: Autor


Wyświetlanie 1-2 z 2
Tytuł:
The properties of damping vibrations by a layer of carbon nanotubes on the lateral surface of a piston
Autorzy:
Iskra, A.
Babiak, M.
Kałużny, J.
Giersig, M.
Kempa, K.
Powiązania:
https://bibliotekanauki.pl/articles/246598.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
carbon nanotubes
combustion engine
friction losses
vibrations
Opis:
As a result of applying the hydrodynamic lubrication theory in the piston-cylinder group of a combustion engine, the authors have obtained the opportunity for practical elimination of abrasion of this unit. However, it turns out that in the case of the engine start, especially after a longer standstill and before the oil film is formed, the piston lateral surface’s micro-roughness comes into direct contact with the cylinder bearing surface. For this reason, manufacturers more and more commonly apply a special layer on the lateral surface of a piston, which decreases the friction force and eliminates very damaging effects of the so-called semi-dry friction. It turns out that applying an enriching layer on the lateral surface of the piston may result in an additional effect, which is not usually associated with the pistoncylinder unit. This effect is the damping of torsional vibrations. Thus, despite the seemingly insignificant properties of materials which the elements of the kinematic pair are made of, as a result of the occurrence of the layer with specific properties on these elements, one may find that these layers – even when they are separated by the oil film – can change the parameters of collaboration of the elements of the kinematic pair. In particular, it concerns generating and damping vibrations, and in such circumstances frictional losses may also be subject to change, which is the main domain of the conducted research presented in this paper. The article analyzes various effects which are caused by applying a special layer formed of carbon nanotubes (NCT in short) on the lateral surface of the piston.
Źródło:
Journal of KONES; 2013, 20, 3; 177-184
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparing the resistance to motion of pistons coated with a layer of nanotubes with standard pistons
Autorzy:
Iskra, A.
Babiak, M.
Kałużny, J.
Giersig, M.
Kempa, K.
Powiązania:
https://bibliotekanauki.pl/articles/247841.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
friction in internal combustion engine
nanotubes layers
Opis:
The paper presents preliminary results of testing the resistance to motion of pistons coated with a layer of carbon nanotubes (CNTs). A significant part of this paper was devoted to the problems of putting a layer of nanotubes on the surface of an aluminum alloy. Obtaining a layer of nanotubes of a very narrow margin of tolerance was a difficult technological problem to overcome. A standard process of growing a layer of nanotubes leads to a corrosion damage of the side surface of pistons; therefore, new technologies were developed allowing for obtaining a permanent layer of nanotubes less than 5 microns thick. Pistons whose side surfaces were coated with a layer of nanotubes were mounted to an engine with an external drive, and then measurements of the moment of momentary resistance to motion were performed, which enables capturing these phases of the engine work cycles in which the layer of nanotubes gives the best results. At present, long-term research is being carried out in order to determine the degree of the risk of exfoliation of the layer of nanotubes under the conditions of large mechanical and thermal loads. The special nanotechnology method cold nanosphere lithography has been invested to control the structural properties sand growth of multiwalled carbon nanotubes. The preliminary analysis of dismantled pistons revealed that nanotubes layers were partially worn off at the peaks of micro roughness but in the valleys, the nanotubes accurately adhered to the piston lateral surface.
Źródło:
Journal of KONES; 2012, 19, 2; 227-233
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies