Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jankowski, R." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Effect to the fuel system type on energy, economic and environmental indicators of the spark-ignition engine work
Autorzy:
Ambrozik, A.
Ambrozik, T.
Kurczyński, D.
Łagowski, P.
Jankowski, R.
Kowalczyk, W.
Powiązania:
https://bibliotekanauki.pl/articles/245062.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vehicles
combustion engines
fuel supply system
emission of exhaust gases
Opis:
The paper presents selected results of tests on the Fiat Panda I car powered by 1.2 dm3 spark ignition engine. The engine had production installed fuel system with the single-point petrol injection. To improve its in-service performance, the engine was fitted with the multi-point injection fuel system. The assessment of the indicators of the work of the engine, fitted with single-point, or alternatively, multi-point injection fuel system, was conducted on the basis of the tests performed on the MAHA chassis dynamometer. First, tests were run for single-point injection fuel system. Next, the same tests were performed when the engine was fitted with the multi-point injection fuel system. In the tests, engine power, torque, fuel consumption and the concentrations of the exhaust gas components were measured. The latter included carbon monoxide CO, carbon dioxide C02, hydrocarbons HC, nitrogen oxides NOx, and oxygen 02. AVL Digas 4000 exhaust gas analyser was used to take measurements of the concentrations of the basic components of the exhaust gas and of the excess air ratio %u03BB. The investigations were conducted by performing the inertia test and by using the dynamometer to determine the basic indicators of the engine operation. In the investigations, the crankshaft rotational speed ranged from 1500 to 6500 rpm with 500 rpm step. The experimental results made it possible to evaluate how the manner and site of fuel delivery affect the engine -work indicators.
Źródło:
Journal of KONES; 2014, 21, 3; 7-14
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact analysis of air humidity on operating parameters of diesel engine
Autorzy:
Haller, P.
Jankowski, A.
Kolanek, C.
Magdziak-Tokłowicz, M.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/246293.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
humidity
diesel engine
efficiency
engine power
engine torque
Opis:
A major problem in the combustion diesel engines is the different distribution of the mixture of air and fuel and also temperatures inside the combustion chamber. It helps the formation of points of the high and low oxygen concentration in the combustion chamber of the engine. In areas with a high concentration of oxygen, the combustion process produces very harmful NOx, and in places with low oxygen concentration, as a result of incomplete fuel combustion particles are created in the form of soot. This not regular distribution of the mixture of air and fuel and temperatures in the combustion chamber affect the limited maximum engine power and efficiency at his every operating cycle. One method for improving the combustion process is feeding into the engine air with high relative humidity. The study was conducted on a chassis dynamometer at the Department of Vehicles Engineering Wroclaw University of Technology. For the purposes of the study determined the external characteristics, including maximum engine power and maximum engine torque at different air relative humidity and quite similar air temperature. Analysis of the results of research shows that high air relative humidity has a positive effect on the work parameters of the diesel engine.
Źródło:
Journal of KONES; 2015, 22, 3; 37-42
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using LCA method to describe logistic system of fuel
Autorzy:
Haller, P.
Jankowski, A.
Jaworska, E.
Kardasz, P.
Markowska, K.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/245154.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
logistic system
LCA method
fuel efficiency
life cycle
Opis:
This paper presents the life cycle of the fuel with the use of LCA. This method is taken from the management theory allows to describe and predict the impact of production processes, transport and use of fuels on the environment. The aim of the study is to compare the energy consumption of the test fuels (diesel, a blend of rapeseed oil and butyl alcohol) in the process of their production. The results indicate that most energy is consumed during the processing of crude oil. This process produced a large quantity of sulphur oxides. Very energy intensive (53,859 GJ per 10 k litres of fuel produced) part of the production is rape culture. This is due to the long working hours of agricultural tractors and combines. In this process, are secreted large amounts of exhaust gas: CO (2.664 kg), NOx (23.31 kg). Inter alia, environmental life cycle assessment, schematic structure of the LCA, the energy balance of the life cycle of diesel oil, the energy balance of the life cycle of rape oil mixed with butyl alcohol, the balance of raw material sourcing, the balance of the materials necessary to production of a mixture of rape oil and butanol alcohol are presented in the paper.
Źródło:
Journal of KONES; 2015, 22, 3; 293-299
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies