Wszystkie pola: military vehicles - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Firefighting systems in military vehicles
Autorzy:: Sosnowicz, R.
Powiązania:: https://bibliotekanauki.pl/articles/247605.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: firefighting system
military vehicle
optical and thermal sensors
steering devices
firefighting equipment
Opis:: The article discusses the examples of fire causes in the military vehicles and the consequences they may cause in the military vehicles. It has been observed that the frequent cause for the damage of military vehicles and loss of crew health and life is not the direct impact with the missile, but fires caused e.g. by impact with a missile, mines and firing bottles actions. Therefore, there is the need to use firefighting systems in the military vehicles. The development of the firefighting systems earmarked for the military vehicles has been presented. The contemporary construction solutions for the firefighting system earmarked for the motor and combat departments, as well as selected external parts of the military vehicles as well as basic conditions influencing the firefighting systems of various purposed have been discussed. The advantages and disadvantages of halons used previously as basic extinguishing means, current legal restriction concerning the halon use as well as potential halon equivalents to extinguish fires in the military vehicles have been discussed. The new extinguishing equipment, the means of which will not have negative impact on the crew, vehicle and natural environment – in particular in terms of destroying ozone layer and causing greenhouse effect will require checking the correctness of their functioning, the extinguishing effectiveness and the impact on the natural environment. The testing of the firefighting systems for military vehicles has been already conduced in the Military Institute of Armoured and Automotive Technology in Sulejówek.
Źródło:: Journal of KONES; 2015, 22, 1; 289-298
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Feasibility study of military vehicles in short mode
Autorzy:: Simiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/246656.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety
simulation
military vehicles
Opis:: The paper presents the methodology prepared by the author. During the process of acquiring new vehicles for the armed forces, time is of the essence in practice of conducting a wide range of structure changes in previously implemented undercarriages. It has to be pointed out that with a high individuality and the very nature of the units, difficulties in scope of comprehensive testing with regard to matters of transport safety. What is more, two determinants are essential in the process of acquiring equipment - time and cost. The process does not allow for improvement and perfecting of the structure, and the research in scope of wheel vehicle movement safety may be limited. The procedure of implementation and verification of equipment stresses the structure optimization as early as on the designing and prototype preparation stages. The procedure of acquiring new wheel vehicles for the military is one of the main premises for preparing the methodology with use of simulation research. Conducting research on the basis of the prepared methodology allows for avoiding possible traffic risks. The methodology enables an effective support for the current process of wheel vehicle acquisition for the armed forces. In this work the research procedure consisting of the necessary range of prepared, experimentally verified models, accepted by the methodology, have been verified. In order to do that two simulation models have been built, both of various levels of complexity.
Źródło:: Journal of KONES; 2012, 19, 2; 501-506
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Device supporting military vehicles buoyancy and ballistic resistance
Autorzy:: Derewońko, A.
Sławiński, G.
Niezgoda, T.
Powiązania:: https://bibliotekanauki.pl/articles/244644.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FEM
ballistic protection
buoyancy
military vehicles
panels
elasto-plastic
Opis:: A deep modernization of equipment due to its assembling to the modern requirements of a battlefield and getting full compatibility to NATO structures caused that some military vehicles equipment with additional staff lose their buoyancy or are at the edge of losing it. The solution to this problem can be setting an additional device which helps to increase mass that allows to keep buoyancy of a military vehicle. The panels are fixed as the outer elements of the container which is simultaneously used for storing the elastic air cushions. Before the water crossing, the air cushions are filled with gas and additional buoyancy force is generated. The paper presents a structure and usage of a multipurpose ballistic protection which, in the passive state, is an additional armour and in the unfolded state increases buoyancy lost in the case of setting additional devices or armament. In the paper, initial simulations developed with the use of Ls-Dyna software are described. The influence of modules number of the air cushion on the buoyancy of the multi-purpose ballistic protection is considered. The advantage of the solution is possibility of the chamber volume change which causes the increase of device volume of the whole module of the chambers is dependent on the vehicle buoyancy which results from its current weight.
Źródło:: Journal of KONES; 2011, 18, 1; 129-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Numerical and experimental research on the dynamic loads in military vehicles
Autorzy:: Rybak, P.
Borkowski, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/949498.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military vehicle
armoured vehicle
load
research
modelling
experiment
Opis:: The work presents the fragments of research on the dynamic loads acting on selected military vehicles. Designing new armoured vehicles or introducing modifications is preceded by model tests carried out under various conditions, analysing the effect of dynamic loads which may result during the use of the vehicle, e.g. due to the roughness of the road, firing, IED explosions or the vehicle being hit by a shell. The main purpose of conducting model research and verifying their findings in experimental research is to improve the effectiveness and safety of operation of systems and installations of military vehicles, increase the dynamics of the movement, improve the protection and ensure that the crew is not killed. Among the used models of military vehicles, discrete models are applied, formulated in the adjusted Lagrange description, as well as the models based on the fine element method for highly nonlinear problems and forces acting for a very short time. Due to the unique selection of military equipment, the methods of calculation and analysis of model research (simulations) and experimental research presented in the work are considered qualitative rather than quantitative.
Źródło:: Journal of KONES; 2016, 23, 4; 435-441
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Analysis of the military vehicles operating process by means of Markov processes
Autorzy:: Żurek, J.
Borucka, A.
Ziółkowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/245001.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: operation
Markov processes
military vehicles
Military Economic Units
Opis:: The article presents the method of analysing the operating process of Star military vehicles in their readiness aspect. The subject of research was the Military Economic Unit, recently created in the Polish Army. Markov processes were applied. A simple 5-state model was built, and the research was made in a discrete, as well as continuous time. The limit probabilities, both for the chain and the time, were estimated. Thanks to Chapman-Kołomogorov-Smoluchowski equations, the long-term projections could be estimated. To ensure of operating processes, correctly object’s permissible transitions from the previous state to the next one were chosen. It was defined based on technical documentation and owned operational knowledge on the considered operating process. The mathematical description of a set of permissible transitions includes a matrix of permissible Si → Sj transitions from the previous state Si (lines) to the next one. The five-state system has possible and forbidden transitions are presented. Graph of permissible transitions for the five-state operation model usage, standby, maintenance, repair, standstill in repair; correlogram for the average duration of the state; evolution of the probability of the Star cars’ staying in the state of usage, standby, maintenance, repair, standstill in repair are presented in the article.
Źródło:: Journal of KONES; 2016, 23, 2; 443-453
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: An analysis of an explosive shock wave impact onto military vehicles of contemporary warfare
Autorzy:: Saska, P.
Krzystała, E.
Mężyk, A.
Powiązania:: https://bibliotekanauki.pl/articles/244453.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: shock wave
military vehicle
landmine and IED protection
experimental researches
Opis:: Landmines and improvised explosive devices (IED) are the basic weapon used by the rebels against the Coalition forces in Afghanistan and Iraq. It is estimated that about 50% of the casualties (wounded and killed) among the soldiers from the US and other countries participating in both conflicts are caused by explosive charge. Introduction of vehicles providing proper protection of the crew against an explosive shock wave generated by a detonation of mines and improvised explosive devices into the arsenal has become one of the priorities of modernization of armed forceps. The parameters critical to the emerging of a hazard for the surrounding includes the overpressure impulse and the shock wave overpressure. The problem of defining the parameters of an explosive shock wave generated after detonation of charges of various mass, shape and physical-chemical properties is a subject of studies at much scientific institution. The gained quantitative data are not, however, published in public reports, thus a need of performing one’s own experimental and numeric research arise. The goal of these studies is to find solutions increasing soldier’s safety at the battlefield. The paper presents an analysis of impact of a shock wave onto structures of military vehicle. Furthermore, methods of experimental definition of explosion shock wave parameters were presented and conclusions for the needs of further experimental-numerical studies were formulated.
Źródło:: Journal of KONES; 2011, 18, 1; 515-524
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Influence of destructor case type on behaviour of fragments in military vehicles active protection system
Autorzy:: Nowak, J.
Panowicz, R.
Konarzewski, M.
Powiązania:: https://bibliotekanauki.pl/articles/243721.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: finite elements method
simulation
military vehicles
directed fragmentation warheads
Opis:: Military vehicles active protection systems against cumulative missiles are designed to destroy the attacking missile before it hits the vehicle armour. The article presents the results of numerical studies of one of the elements of active protection system, which is the fragmentation destructor. A typical directed fragmentation warhead consists of a few parts: metallic or composite case, explosive material and fragmentation elements in the form of spheres, cylinders. The authors of this study evaluated the influence of the destructor case type – in particular material – on the effectiveness of the destructor. The effectiveness was evaluated on the basis of the maximum speed of balls. Evaluation was performed for the selected balls from each layer. Numerical calculations were performed for two materials of the case: steel and aluminum. It was assumed in simulation that the detonating material is the plastic explosive C4. The numerical analyses were based on the finite element method with the explicit time integration method implemented in the Ls-Dyna program. The interaction of solid and gaseous medium has been modelled using ALE coupling. Mechanical properties of the case were described using a simplified Johnson-Cook type material. The detonation process was described using programmed burn model approximations, and the behaviour of detonation products was described with the JWL (John, Wilkins, Lee) equation.
Źródło:: Journal of KONES; 2014, 21, 1; 183-187
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Influence of dynamic load on military vehicles construction
Wpływ obciążeń dynamicznych na budowę pojazdów wojskowych
Autorzy:: Simiński, P.
Stryjek, P.
Powiązania:: https://bibliotekanauki.pl/articles/241969.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: obciążania dynamiczne
obciążania udarowe
badania eksperymentalne
pojazd
dynamic load
impact load
experimental researches
vehicle
Opis:: W artykule przedstawiono wpływ obciążeń udarowych i dynamicznych na konstrukcje pojazdów. Autorzy skoncentrowali się w głównej mierze na pojazdach terenowych i wojskowych, ponieważ warunki w jakich są eksploatowane powodują, że są one najczęściej narażone na obciążenia udarowe. W artykule pokazano przykłady wpływu obciążeń dynamicznych pochodzących od nierówności drogi na konstrukcje pojazdu. Ponadto zwrócono również uwagę na inne możliwe źródła obciążeń dynamicznych występujące w procesie eksploatacji. Przedstawiono także praktyczne uszkodzenia, które powstały na skutek wspomnianych obciążeń od innych źródeł. Uszkodzenia te wynikają zarówno z przekroczenia doraźnej wytrzymałości konstrukcji, jak i często z przyjęcia przez konstruktorów, już na etapie projektowania, błędnych rozwiązań. W kolejnej części zwrócono uwagę na rozwiązania konstrukcyjne oraz sposoby zapobiegania uszkodzeniom, mające na celu zabezpieczyć konstrukcje pojazdu i pasażerów, przed negatywnym skutkiem obciążeń udarowych. Niniejszy artykuł ma na celu przekazanie praktycznych uwag na temat wpływu obciążeń dynamicznych na konstrukcje pojazdów. Wszystkie z przykładów wpływu obciążeń dynamicznych na konstrukcje pojazdów, przedstawionych w artykule, pochodzą z praktyki badawczej i często dotyczą one pojazdów specjalnych lub konstrukcji prototypowych. Pojazdy wojskowe powinny być zabezpieczone przed wszelkiego rodzaju obciążeniami udarowymi, które mogą wystąpić podczas eksploatacji, a w wypadku przekroczenia wytrzymałości poszczególnych elementów, pojazd powinien być możliwy do naprawienia siłami wojskowych jednostek remontowych, nawet w warunkach poligonowych.
The article presents influence of dynamic load on construction military vehicles. The authors concentrated their attention on off road and military vehicles, because they operated in hard condition and are endanger to load impact. The article presents examples of influence the dynamic load on bump's road. Additionally, authors take note of another sources dynamics load during operation. Showed also practise damages as a result of dynamics load from different sources. These damages are result from over durability and engineer mistakes in construction procedure. In next part of articles the authors take note of construction solutions and ways prevent to damages. These solutions have been protecting crew to negative result of dynamics load and impact load. The article additionally takes note of practise experience from vehicle operation. All examples to coming from testing practise and often concern to prototypes and special vehicles. Military vehicles should be safe against all manner of impact loads which can appear during working, and in the case of excess strength particular elements, the vehicle should be retrievable the vehicle should be been by retrievable by military repair troops, even in range conditions.
Źródło:: Journal of KONES; 2007, 14, 1; 343-348
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Operational strategy of military motor vehicles
Autorzy:: Niziński, S.
Kupicz, W.
Powiązania:: https://bibliotekanauki.pl/articles/244538.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: motor vehicles
control
operation
diagnostics
maintenance
Opis:: The paper presents an outline of a new strategy to improve operational system of military motor vehicles. Technical diagnostics method is a tool for controlling the motor vehicles maintenance in the state of their functional and professional operability. Three criteria have been assumed to control and maintain vehicles in the state of their technical operability, effectiveness and safety. It was found that the safety of military vehicles is controllable by board-external diagnostic systems as well as diagnostic systems as part of their operating systems. An algorithm is presented for diagnosing, maintaining, and assessing vehicles security in combat. It was found necessary to develop an improved technology for vehicles maintenance, including technological processes, organization of the processes implementation progress and their infrastructure. The organizational chart has been presented of the motor vehicles technological diagnostics and maintenance process. The paper also includes the concept for assessment of the vehicles operational effectiveness based on criteria of the static and dynamic coefficient of technical readiness and costs.
Źródło:: Journal of KONES; 2011, 18, 1; 395-402
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Method for testing steerability and stability of military vehicles motion using SR60E steering robot
Autorzy:: Kupicz, W.
Niziński, S.
Powiązania:: https://bibliotekanauki.pl/articles/244560.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: vehicles
steerability
testing methods
military
Opis:: The paper presents testing results that serve the development of research methodology for steerability and stability of military special-purpose vehicles using the SR 60th control robot. Due to their high centre of mass and a large moment of inertia of their body, armoured vehicles pose a serious hazard during dynamic maneuvers. The phenomenon of oversteering is dangerous, which causes automatic reduction in turning radius and thus increases the lateral acceleration at the high-lying centre of mass usually leads to the vehicle rollover. In conditions of a limited tractive adhesion, any slight side impulse (side wind, a drive through a road rut) is enough to result in the vehicle sideslip. At high inertia, each response of any surprised driver is delayed. Therefore, the research studies on behaviour of special-purpose vehicles, including the military ones during road tests are particularly dangerous. The developed methodology allows mitigating the risk of using the steering robot and enables to obtain a very high research results repeatability, unattainable even for a very skilled test driver. The procedure developed hereto is used to accurately determine the safe driving velocity while making sudden maneuvers, and for vehicles steerability characteristics. It may become an excellent tool to verify simulation models.
Źródło:: Journal of KONES; 2011, 18, 1; 317-324
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Seat as an element improving physical protection of soldiers during explosion of mines under the armoured military vehicles
Autorzy:: Sosnowicz, R.
Wachowiak, P.
Dorczuk, M.
Rzymkowski, C.
Dacko, A.
Dziewoński, T.
Toczyski, J.
Powiązania:: https://bibliotekanauki.pl/articles/244421.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military
explosive charge
explosion results
numerical model
injuries
safety
Opis:: This study presents possibilities to apply the numerical simulation of dynamic response for explosive (impulse) loads, caused by detonation of mine under the military armoured vehicle, acting on a crew member seating in chair, in order to determine methods to minimize the results of impact of vehicle body structure on the crew, mainly caused by it accelerations and overloads. Furthermore, this article presents factors, which have impact on numerical model and detonation phases necessary to conduct the mentioned above simulation. Information on physical values acting on the soldier and injuries resulting from such actions are important to understand how important element, improving physical protection of soldiers during mine detonation below the armoured military vehicle, is a chair. According to the dissertation "Development Of Lower Extremity Injury Criteria And Biomechanical Surrogate To Evaluate Military Vehicle Occupant Injury During An Explosive Blast Even" the most common injuries occurring during mine explosion under the military vehicles, eliminating soldiers from further service, include: sprain of vertebras, fracture of vertebra, light fracture of skull, brain shaking, brain concussion, fracture of tibia, damage to ilia, fracture of fibula bones. These injuries occur most often at the first two stages of explosion, called local and global effect.
Źródło:: Journal of KONES; 2011, 18, 1; 595-602
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Autonomic logistics system of intelligent military motor vehicles
Autorzy:: Niziński, S.
Kupicz, W.
Powiązania:: https://bibliotekanauki.pl/articles/244540.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: motor vehicles
logistics
operation
diagnostics
steering
Opis:: The paper presents a concept of autonomic logistics system of intelligent military motor vehicles. A classification of vehicles and a definition of intelligent motor vehicles has been provided. The intelligent motor vehicle distinguishes the functional components systems and the integrated control system. The integrated system has been defined to control the intelligent motor vehicles, including subsystems of: data identification, information-and-decision-making and executive components. The data identification subsystem distinguishes the following components: logistic about the state of environment, navigation, and communications. The automatic logistic system consists of the following subsystems: diagnostic, operational, security, and power supply. The purpose and tasks of those subsystems have been examined. The information and decision-making subsystem has been defined: classic, expertise, and hybrid. Tasks of the vehicle setting components subsystem have been defined. A place of autonomic logistic system in the structure of the military motor vehicle has been determined. The development of a design and the implementation of the proposed concept of the autonomic logistic system will significantly increase the performance properties of military motor vehicles in aspect of effective execution of their combat missions.
Źródło:: Journal of KONES; 2011, 18, 1; 385-394
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: The research on dynamic loads and traction properties of military vehicles in the aspect of improvement of their structures
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Michałowski, B.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247931.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military vehicle
dynamic loads
traction
model tests
experimental tests
Opis:: Since the beginning of the 90’s, a scientific team in the Motor Vehicle and Transport Institute of the Mechanical Department in the Military University of Technology, has been involved in the model and experimental tests of the existing structures of the military vehicles (tanks, combat infantry vehicles and wheeled armoured carriers) in the aspect of their modernization. A part of works is related to the military vehicles included in the army’s equipment and the other parts are related to newly designed vehicles. In both cases issues related to the behaviour of selected assemblies and the whole vehicle, structure during threats posed by the reality of contemporary battlefield or armed symmetric or asymmetric conflicts are analysed. Selected effects of the tests and analyses will be presented mostly within the qualitative scope due to the data sensitivity. Contemporary design of military vehicles requires involvement of various research methods and specialized calculation software. The results obtained during performed various experimental tests make a valuable basis for verification of numerical models used in design process and multi-option simulation calculations.
Źródło:: Journal of KONES; 2015, 22, 1; 37-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Operational tests of braking systems for high mobility vehicles
Autorzy:: Kupicz, W.
Siminski, P.
Powiązania:: https://bibliotekanauki.pl/articles/949514.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety
mobility
military vehicles
braking systems
Opis:: The article presents the results of comparative tests of the experimental designs of the braking system of high mobility vehicles. Braking systems determine the safety of vehicles. Higher mobility requirements should not remain without an effect on adapting the braking system to the use conditions. Article developed within the scope of execution of the NCBiR project DOBR-BIO4/021/13355/2013. The mileage tests lead to a thorough evaluation of the various systems of the vehicle. In order to carry out the mileage test correctly, the vehicle has to be exposed to the most difficult conditions to which it is adapted to, according to the preliminary assumptions. In the case of military vehicles, the most difficult terrain is the training ground terrain with frequent bumps, uphill’s, downhill’s and water hazards, etc. The vehicle has to be operated at the maximum use of all its components (inter-wheel and inter-axle locks etc.). Only the vehicle that has been properly tested, and meets all the assumptions for a given object can be considered safe.
Źródło:: Journal of KONES; 2015, 22, 1; 167-172
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Electronic engine control systems in modern vehicles in aspect of using it in military combat and logistic vehicles
Autorzy:: Stryjek, R.
Motrycz, G.
Powiązania:: https://bibliotekanauki.pl/articles/241546.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
electronic control unit
military vehicles
Opis:: Because of much more restricted norms about polluting gas emission in modern vehicles, there is a need to make better control of fuel combustion. The process of fuel combustion is controlled by electronic control unit (ECU). The unit is analysing signals from many sensors, and when the control unit is not able to correct mistakes in fuel combustion, it turn on a warning indicator light and alarming a driver that the emission of polluting gas is too high. The problem is, that the hole system is undependable. The level of complicated of the system is high. In military vehicles, suddenly lost of power of an engine, because of some little mistake in emission control system, in combat conditions could be very danger. Off course, some armoured vehicles has special program in ECU, but most of the military vehicles are built on civilian vehicles, without any changes. The paper show potentials danger in modern electronics controls units of engines. The authors has also practice not only in vehicles testing and service, but also in preparing sport vehicles for rally. The sports programs for ECU in rally vehicles, allows for example for drive with the full power of the engine, even if the temperature of the cooling system is very high, and in normal vehicles, the ECU would not allow to work in such a condition.
Źródło:: Journal of KONES; 2013, 20, 4; 435-440
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "military vehicles" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język