Wszystkie pola: fuels properties - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental testing of influence of commercial depressants on diesel fuels low temperature properties
Autorzy:: Baczewski, K.
Szczawiński, P.
Kamińska, M.
Powiązania:: https://bibliotekanauki.pl/articles/243000.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: engine fuels
diesel fuel
low temperature properties
depressants
Opis:: The types and action mechanism of depressant additions, which improves the properties of diesel fuels in low temperatures, were presented. The results of a sixteen different depressants influence on cloud point (CP) and cold filter plugging point (CFPP) of diesel fuels ONA without additions are given in following elaborate. The depressants were applied to samples of diesel fuel in concentration between 500 and 5000 ppm. The present paper shows correlation of diesel fuels ONA CFPP and ΔCFPP depression between depressants concentration. Only a part from the tested depressant additions has a significant impact on diesel fuel cloud filter plugging point at concentration recommended by their manufacturers. Moreover, some of the additions do not decrease the CFPP value. The depressants can be divided into three groups by their effectiveness: first, the ones which decreases greatly the CFPP (from 3 to 11 degrees) by adding only small amount of them (500 ppm), second, with almost no influence on CFPP values in smaller amounts (500 ppm) but reducing CFPP values in larger quantities (to 5000 ppm), third, with no influence on diesel fuels ONA CFPP even in large concentration. In conclusion, lowering the CFPP value depends on the kind of depressant and its concentration in diesel fuel and not on the diesel hydrocarbon composition with addition up to 7% of Fatty Acid Methyl Ester (FAME).
Źródło:: Journal of KONES; 2015, 22, 1; 7-14
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Impact of the additives used in mineral jet fuels on the lubricating properties of synthetic fuels for turbine aircraft engines
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Ozimina, D.
Powiązania:: https://bibliotekanauki.pl/articles/245539.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: lubricity
fuels for turbine aircraft engines
synthetic components
additives
Opis:: Hydrocarbon containing synthetic fuels represent a promising alternative fuels. Despite different chemical compositions, their properties should be similar to properties of mineral fuels, as they are designed for the same drive units. The basic parameter related to the protection of the adequate service life of the power supply devices, including precision pairs, is lubricity. Lubricity depends on a number of factors, including these related to the chemical composition of fuel components and operating additives introduced into fuels in order to modify their properties. The preliminary results of research on the effect of additives: lubricating, anti-corrosion and anti-electrostatic once, on the lubricating properties of a synthetic fuel are shown in the paper. It was observed that there are relations between the content of additives and the dynamics of film formation. It is significant that this does not apply only to the lubricating additive, but also the additive, which protects the correct electrostatic balance by providing sufficiently high electrical conductivity of the fuel. This may indicate that the formation of a lubricating film remains in relation to the intensity of energy transport from the lubricated surface to the molecules of lubricating additives inside the film. The results shown in the paper preliminary confirm the hypothesis, that synthetic components of fuels change the concentration of ordered molecular structures (which are present in mineral part of fuels and which can be responsible for energy transport inside the lubricating film), what resulted in worse fuel ability to create protective film, and anti-electrostatic additive improves lubricity of blends of synthetic and mineral components.
Źródło:: Journal of KONES; 2018, 25, 2; 121-128
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Optical properties of fuels and lubricants vs. aquatic environment protection issues
Autorzy:: Otremba, Z.
Toczek, H.
Powiązania:: https://bibliotekanauki.pl/articles/247174.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: oil film
fuels
lubricants
aquatic environment protection
Opis:: Oils can be optically described by two parameters: light absorption coefficient and light refraction coefficient. Spectrum of absorption coefficient manifests itself in colour of oil, whereas spectrum of refraction coefficient impacts on both refractive and reflective properties of interface between oil and surroundings. Both spectra of absorption coefficient and refraction coefficient have distinctive slopes in ultraviolet edge of spectrum where values of mentioned coefficients decrease from extremely high in ultraviolet to relatively low in visual range. Possibility of perceiving of oil existing in the form of thin film or in the form of an emulsion depends on ambient light conditions and on mentioned optical properties. Additionally perceiving of oil depends on thickness of the oil film and on type of substrate on which oil is spread (water, metal etc.), as well as - if emulsion oil-in-water or water-in-oil is considered - on the droplets size distribution. The present paper begins with a review of optical properties of several oils. Next, an impact of changes of those properties on optical properties of an oil film (spread on water) as well as an impact of those properties on optical properties of oil-in-water emulsion is explained. Finally, exemplary results of numerical simulation of light transfer in marine environment (using above optical properties) - e.g. angular distributions of optical contrast of both sea areas clean and polluted by an oil-film are presented.
Źródło:: Journal of KONES; 2011, 18, 4; 325-330
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Thermal loads of engines for different properties of commercial fuels
Autorzy:: Sroka, Z. J.
Reksa, M.
Miksiewicz, K.
Powiązania:: https://bibliotekanauki.pl/articles/243852.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
thermal loads
fuels
Opis:: It is oblivious, various properties of fuels cause different thermal loads of engines. Question is, how big is this effect and what fuel compound and its property play insignificant part. This paper is focused on problem of quality of diesel commercial fuels in Polish market and it is a challenge to find answer for question mentioned above. The academic staff from Wroclaw University of Technology organized tests with different commercial fuels. Chemical and physical properties of these fuels were studied and used for investigation to define relationships between them and thermal load during simulation process. All researches were done in the lab of Division of Motor Vehicles and Internal Combustion Engines at the Wroclaw University of Technology. Tests have showed differences in chemical and physical properties of fuels, but there is no statistics effect on engine parameters. Results have not also pointed any important differences in thermal loads of engine VW1,9 TDI and its components according to different physical and chemical properties of tested fuels. It is probably because there are differences of calorific values from one side but from other hands various density and specific fuel consumption compensated these differences. To burn unit of fuel contains higher level of oxygen, engine needs lower amount of air, so it gives, for the same fuelling system, lean mixture. It causes higher temperature of exhaust gases and a bit higher exhaust losses
Źródło:: Journal of KONES; 2008, 15, 2; 463-467
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: An effect of physical and chemical properties of commercial diesel fuels on engine parameters
Autorzy:: Sroka, Z. J.
Reksa, M.
Kułażyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/242752.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
diesel engine
engine fuels engine performances
Opis:: This paper is focused on problem of quality of diesel commercial fuels in Polish market and an effect of their properties as well on engine parameters as environment The academic staff from Wrocław University of Technology put the own experience to the huge discussion by making research in the Wroclaw-city, where some probes of fuels were taken from six different commercial fuel stations. Chemical and physical properties of fuels were checked. A real diesel engine VW 1,9 TDI was investigated in university lab of Division of Motor Vehicles and Internal Combustion Engines. Typical engine performances were built including power, torque, fuel consumption, toxicity levels due to different fuels. The IC engine on the test bench, oxygen content in fuels, example of full load performance of VW1,9 TDI for fuel Bio D20-type, differences of mean effective pressure for different fuels, differences of carbon monoxide in exhaust for different fuels, differences of nitric oxides in exhaust for different fuels, differences of smog level in exhaust for different fuels, differences of heat release for different fuels, relation between engine torque and oxygen content in fuels vs. engine rotation are presented in the paper.
Źródło:: Journal of KONES; 2007, 14, 4; 447-452
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Investigation rheological properties of rapeseed oil methylesters and their blends with diesel fuels
Badanie właściwości reologicznych estrów metylowych oleju rzepakowego i ich mieszanin z olejami napędowymi
Autorzy:: Baczewski, K.
Szczawiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/243126.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silniki spalinowe
właściwości niskotemperaturowe
właściwości reologiczne w niskiej temperaturze
depresatory
combustion engines
alternative fuels
Rapeseed Oil Methylesters (RME)
low-temperature properties
rheological properties of low temperature
depressants
Opis:: The paper presents results of investigations of rheological properties (dynamic viscosity and shear rate) at low temperature and cold flow parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of rapeseed oil methylesters (RME), their blends with other fuels and RME with various flow improves additives (depressants). Common depressants for diesel fuels are less efficient with reference to RME. RME generally need other depressants than diesel fuels. The test results showed that common depressants used to improve the cold flow properties of petroleum-based diesel fuels can different effect on pour points and cold filter plugging points of rapeseed oil methylesters. About 1000 ppm of depressants is required to significantly improving of cold flow parameters of rapeseed oil methylesters. It was showed that blending arctic diesel fuel or aviation turbine fuel Jet A-l with rapeseed oil methylesters at rate of 10% (by volume) or more leads to significant improve in the rheological properties (dynamic viscosity and shear rate) of RME at the low temperature and cold flow parameters (Cloud Point, Cold Filter Plugging Point and Pour Point). Keywords: combustion engines, alternative fuels, Rapeseed Oil Methylesters (RME), low-temperature properties, rheological properties at low temperature, depressants.
W pracy przedstawiono wyniki badań właściwości reologicznych (lepkości dynamicznej i naprężeńścinających) w niskiej temperaturze oraz parametrów niskotemperaturowych (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia) estrów metylowych oleju rzepakowego (RME), ich mieszanin z innymi paliwami oraz RME z różnymi dodatkami (depresatorami) poprawiającymi te właściwości. Handlowe depresatory przeznaczone do olejów napędowych są mniej skuteczne w odniesieniu do RME. RME generalnie wymagają stosowania innych depresatorów niż ON. Wykazano, że handlowe depresatory stosowane do olejów napędowych pochodzenia naftowego wpływają inaczej na obniżenie temperatury zablokowania zimnego filtru i temperatury płynięcia estrów metylowych oleju rzepakowego. Do polepszenia parametrów niskotemperaturowych estrów metylowych oleju rzepakowego wystarczy dodanie depresatorów w stężeniu do 1000 ppm. Wykazano, że dodanie do estrów metylowych oleju rzepakowego oleju napędowego arktycznego oraz paliwa lotniczego Jet A-l w stężeniu 10% i więcej (objętościowo) znacznie poprawia właściwości reologiczne (lepkość dynamiczną i naprężenia ścinające) RME w niskiej temperaturze oraz parametry niskotemperaturowe (temperaturę mętnienia, temperaturę zablokowania zimnego filtru i temperaturę płynięcia).
Źródło:: Journal of KONES; 2007, 14, 3; 29-38
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Investigation properties of rapeseed oil methyl esters/aviation turbine fuel Jet A-1 blends
Autorzy:: Baczewski, K.
Szczawiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/243725.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biodiesel
rapeseed oil methylester (RME)
aviation fuels
kinematic viscosity
low-temperature properties
Opis:: The properties of rapeseed methyl ester (RME) and commercial biodiesel (B100) blends with aviation turbine fuel Jet A-1 were investigated. The RME (without improving additives) and B100 (with improving additives – including antioxidants and depressants) were blend with Jet A-1 fuel, to made six mixtures containing: 10 per cent, 20 per cent , 30 per cent, 40 per cent, 50 per cent and 60 per cent Jet A-1 by volume. Their blends were stable. Jet A-1 fuel and RME (B100) blends properties are indirect between Jet A-1 and RME properties. The density, kinematic viscosity at 40 centigrade, cloud point (CP), cold filter plugging point (CFPP) and pour point (PP) RME, B100, Jet A-1 and their blends were measured. Adding the Jet A-1 fuel to the RME and B100 can be the method to improve its low temperature properties. The empirical equations for calculation the density, kinematic viscosity at 40 centigrade, cloud point, cold filter plugging point and pour point RME (B100) blends with Jet A-1 fuel as a function of composition for predicting the properties of RME (B100) blends with aviation turbine fuel Jet A-1 give values in good agreement with experiments. There is good agreement between experimental viscosity data of blends with viscosity calculated with mixture equation by Arrhenius.
Źródło:: Journal of KONES; 2011, 18, 1; 15-22
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effect of LPG gas fuel injectors on the properties of low emission vehicles
Autorzy:: Majerczyk, A.
Radzimirski, S.
Powiązania:: https://bibliotekanauki.pl/articles/241843.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road transport
liquid fuels
LPG
combustion engines
air pollution
environmental protection
Opis:: Modern spark-ignition engines used for the propulsion of low emission vehicles are fuelled by injection systems in which the fuel is individually metered to each cylinder by a single injector (multipoint injection). For the proper engine operation, it is necessary that the injectors are similar to each other and stable in respect of the fuel dosage during the whole engine operation. This requirement is satisfactorily met by petrol injectors used by OEM. In contrast to petrol injectors, gas injector used in LPG-fuelled vehicles, in particular for the retrofit, are still in the development phase and therefore their quality and production consistency are often regarded as unsatisfactory from the standpoint of view of the proper engine operation. The injector-to-injector variation in the fuel dosage results in air-fuel mixture maldistribution in the cylinders, which, in turn, affects vehicle emission characteristics. The paper presents results of an investigation of inconsistency of gas injectors used in LPG vehicles in respect of their dosage. The method of measurement of the dosage uniformity is described. On the basis of the measurement, three sets of injectors differing in respect of injector-to-injector variation were selected for further vehicle tests. Tests were conducted on a passenger Euro 4 car. The emissions of limited pollutants were measured over the NEDC type-approval cycle and cycle's representative for the real world driving under Polish driving conditions. The paper presents results of the conducted tests and discusses the effect of injector-to-injector variation on the pollutant emissions.
Źródło:: Journal of KONES; 2012, 19, 4; 401-410
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Investigation of impacting of aging processes on properties of biodiesel
Badanie wpływu procesów starzenia na zmianę właściwości biodiesla
Autorzy:: Baczewski, K.
Szczawiński, P.
Powiązania:: https://bibliotekanauki.pl/articles/243169.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: silniki spalinowe
paliwa alternatywne
starzenie
biodiesel
estry metylowe oleju rzepakowego (RME)
oleje napędowe
parametry niskotemperaturowe
combustion engines
alternative fuels
aging processes
Rapeseed Oil Methylesters (RME)
diesel fuels
low-temperature parameters
Opis:: W pracy przedstawiono wyniki badań laboratoryjnych procesów starzenia biopaliw (biodiesla), takich jak estry metylowe oleju rzepakowego (RME) i ich mieszanin z bazowym hydrorafinowanym olejem napędowym (HON). Określono wpływ powietrza, światła słonecznego, oddziaływania ciepła i obecności wody na zmianę liczby kwasowej, lepkości kinematycznej i parametrów niskotemperaturowych paliw (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia). Schemat starzenia próbek paliw, wpływ czasu i warunków starzenia na zmianę liczby kwasowej próbek badanych paliw, temperatura zablokowania zimnego filtru TZZF próbek paliw starzonych w różnych warunkach w ciągu 60 tygodni są zilustrowane w artykule. Stwierdzono, że najbardziej podatny na starzenie były estry metylowe oleju rzepakowego (RME) i bazowy hydrorafinowany olej napędowy. W rezultacie starzenia następuje bardzo duży przyrost liczby kwasowej, małe zmiany lepkości kinematycznej i bardzo małe zmiany parametrów niskotemperaturowych (temperatury mętnienia, temperatury zablokowania zimnego filtru i temperatury płynięcia) estrów metylowych oleju rzepakowego (RME). Najintensywniejsze starzenie estrów metylowych oleju rzepakowego (RME) powodują wymuszenia cieplne. Obecność wody intensyfikuje starzenie estrów metylowych oleju rzepakowego (RME), szczególnie przy długim czasie kontaktu.
The paper presents the results of laboratory investigations of aging processes of the biodiesel such as rapeseed oil methylesters (RME) and their blends with hydrofining based diesel fuels. The influence of air, light, elevated temperature and the presence of water on the total acid number, kinematic viscosity at 40°C and low-temperature parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of the fuels was determined. The aging of fuel samples, acid number as a function of time and conditions of aging for evaluated samples of fuels, and Cold Filter Plugging Point (CFPP) of fuel samples aging at different conditions during 60 weeks are illustrated in the paper. The least resistance to aging of rapeseed oil methylesters (RME) and hydrofining based diesel fuel was obtained. The aging influence dramatic increase in total acid number, little changes of the kinematic viscosity at 40°C and least changes of low-temperature parameters (Cloud Point, Cold Filter Plugging Point and Pour Point) of rapeseed oil methylesters (RME). The elevated temperature causes the largest impact on aging of rapeseed oil methylesters(RME). The aging of rapeseed oil methylesters (RME) is intensified in presence of water especially for long time of contact.
Źródło:: Journal of KONES; 2007, 14, 2; 27-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "fuels properties" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język