Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "response surface methodology" wg kryterium: Temat


Wyświetlanie 1-13 z 13
Tytuł:
Clarification of Pharmaceutical Wastewater with Moringa Oleifera: Optimization Through Response Surface Methodology
Autorzy:
Eri, I. R.
Hadi, W.
Slamet, A.
Powiązania:
https://bibliotekanauki.pl/articles/123396.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
flocculant
Moringa oleifera
response surface methodology
Opis:
Herbal pharmaceutical industrial wastewater contains a high amount of suspended solids and alkaline (pH > 8); therefore it requires approprite coagulant and flocculant compounds for its wastewater treatment. The most widely used flocculant is a synthetic that has certain problems such as non-biodegradability and releases of toxic residual monomers. The use of eco-friendly flocculants as alternative materials for conventional flocculant in water and wastewater treatments is increasing. Numerous factors influence the performance of coagulation-flocculation process, such as coagulant dosage, flocculant dosage, initial potential of hydrogen (pH) and velocity gradient of coagulation-flocculation. The main aim of this research is to evaluate the capability and effectiveness of Moringa oleifera extract for removal of suspended solid in herbal pharmaceutical industry. A coagulation-flocculation test was done by performing jar test at various speeds, according to the variation of the conducted treatment research. In this study, response surface methodology (RSM) approach was used to optimize the concentration of coagulant dosage, flocculant dosage and flocculation velocity gradient (G), and the results were measured as maximum percentage of suspended solid removal. The wastewater used in this research originally came from the inlet of herbal pharmaceutical industry wastewater treatment plant, which was collected over 3 days. The wastewater has a total suspended solids of more than 1250 mg/L, and was alkaline (pH 9–10). The moringa extract was made from the extraction of a fat free moringa powder with a salt solution in a certain ratio. The percentage removal of suspended solid was 93.42–99.54%. The final results of the analysis of response surface showed that the variables of flocculant dosage and the flocculation velocity gradient (G) have a huge impact on the amount of suspended solid removal, compared with the coagulant dosage. The model generated from the response analysis is a quadratic model. The optimum point of the removal suspended solid quadratic model is at 10.6566 mg/L alum dosage, 13.8185 ml/L Moringa oleifera extract dosage, and G velocity of flocculation 84.845 sec-1.
Źródło:
Journal of Ecological Engineering; 2018, 19, 3; 126-134
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Treatment of Hospital Wastewater Using Electrocoagulation Process – Analysis by Response Surface Methodology
Autorzy:
Salah Al-Shati, Ahmed
Alabboodi, Khalid O.
Shamkhi, Hassan A.
Abd, Zahraa N.
Emeen, Sara I. Mohammed
Powiązania:
https://bibliotekanauki.pl/articles/2202336.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
electrocoagulation
RSM
response surface methodology
COD removal
Opis:
Electrocoagulation (EC) can be defined a method utilized to remove pollutants from wastewater by applying an electric current to sacrificial electrodes. Many experimental variables like NaCl content (0–4 g/l), current density (5–25 mA/cm2), time (30–90 mins), and pH (4–10) that influence the removal efficiency regarding COD were considered. In the presented research, three distinct configurations related to electrodes, i.e. Al-Al, Fe-Al, and Fe-Fe, have been utilized to determine which was the most effective. RSM depending on BBD was utilized for optimizing various operational parameters with regard to HWW by use of EC. Maximum COD removal (97.9%) was reached at Fe-Al electrodes, NaCl (3.2 g/l), current density (24.7 mA/cm2), time (81.7 mins), and pH (7.4). COD removal (91.3%) was achieved at the Al-Al electrodes, NaCl (3.8 g/l), current density(23.5 mA/cm2), time-86.3 min, and Ph (7.7). At the Fe-Fe electrodes, the removal of COD (89.5%) was obtained at NaCl (2.3 g/l), current density (24.6 mA/cm2), pH 8.5, and time (86.9 min). This indicates that EC could remove pollutants from different types of wastewaters under many operating parameters and with arrangements of electrodes.
Źródło:
Journal of Ecological Engineering; 2023, 24, 1; 260--276
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Valorization of Banana Bunch Waste as a Feedstock via Hydrothermal Carbonization for Energy Purposes
Autorzy:
Sulaiman, Sani Maulana
Nugroho, Gunawan
Saputra, Hendri Maja
Djaenudin
Permana, Dani
Fitria, Novi
Putra, Herlian Eriska
Powiązania:
https://bibliotekanauki.pl/articles/27323833.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
response surface methodology
hydrothermal carbonization
banana bunch waste
Opis:
In this article, the potential use of banana bunch waste (BBW) as a source of bioenergy through hydrothermal carbonization (HTC) was investigated. BBW, a byproduct of banana production, is difficult to use as a fuel due to its low density and carbon ratio. However, its high lignocellulose content indicates its potential as a bioenergy source. To determine the optimal HTC conditions, an experiment was conducted using temperature, water to feedstock ratio, and processing time, with the RSM Box-Behnken method used to produce 15 trial formulations. Energy value and mass yield data were collected to determine the optimal values for both. The main parameter affecting energy yield was found to be the water to feedstock ratio, and the optimal conditions were determined to be a temperature of 180 °C, a water to feedstock ratio of 1.5:1, and a processing time of 15 minutes. The highest energy yield of 99.7% was observed under these conditions, while the lowest mass yield of 25.30% was observed at a temperature of 200°C with a water ratio of 2 and a time of 15 minutes. The heating value of the HTC solid product ranges from 17–27 MJ/kg, which is comparable to low-grade sub-bituminous coal, indicating potential for co-firing with coal and other hydrothermal products as a fuel.
Źródło:
Journal of Ecological Engineering; 2023, 24, 7; 61--74
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Slow Sand Filtration for the Raw Municipal Wastewater Treatment by Using the Blood Cockle (Anadara granosa) Shell as an Alternative Filter Media through the Response Surface Methodology
Autorzy:
Fitriani, Nurina
Ni'matuzahroh
O'Marga, Timothy Tjahja Nugraha
Radin Mohamed, Radin Maya Saphira
Wahyudianto, Febri Eko
Imron, Muhammad Fauzul
Isnadina, Dwi Ratri Mitha
Soedjono, Eddy Setiadi
Powiązania:
https://bibliotekanauki.pl/articles/2105267.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
domestic wastewater
response surface methodology
slow sand filter
total coliform
Opis:
This research aimed to investigate the optimum conditions of slow sand filter (SSF) media modification by using ground Anadara granosa shell waste and the effect of the ripening period on the total coliform (TC) removal efficiency. The response surface methodology with the central composite design was conducted with three factors, namely, seeding time (2–3 weeks), running time (0–20 days), type of SSF media (i.e., river sand, A. granosa shell, and their combination), as independent variables. The results showed that the ripening period factor interacted insignificantly by improving the TC removal efficiency due to short ripening time (p > 0.05). The optimum conditions of the SSF to achieve maximum TC removal efficiency (99.70 ± 21.50%) were as follows: combination media of river sand and ground A. granosa shell waste, 2.8 weeks (20 days) of ripening period, and 20 days of operation. In conclusion, the optimum operating parameters of the slow sand filter revealed that the combination of river sand and A. granosa shell as well as prolonged ripening and running times could increase the removal efficiency of TC. Hence, the A. granosa shell has good application potential as filter media to remove TC from the municipal wastewater.
Źródło:
Journal of Ecological Engineering; 2022, 23, 6; 100--111
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Role of Boron-Doped Diamond and Platinum Anodes in the Three-Compartment Electrochemical Pretreatment of Stabilized Landfill Leachate – Response Surface Methodological Approach
Autorzy:
Bagastyo, Arseto Yekti
Anggrainy, Anita Dwi
Rosyidah, Badriyah
Powiązania:
https://bibliotekanauki.pl/articles/2202300.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
boron-doped diamond
electrochemical process
leachate pretreatment
platinum
response surface methodology
Opis:
Stabilized landfill leachate contains high fractions of refractory organics that cannot be effectively degraded by simple biological or physicochemical treatment. Thus, primary treatment was required to improve biodegradability and enhance treatment efficiency. This study investigated the role of Boron-Doped Diamond (BDD) and platinum (Pt) anodes at a current density of 29.2 and 33.3 mA/cm2 in the electrochemical processes for the pretreatment of stabilized leachate. A three-compartment electrochemical reactor was used in the research to enhance the removal of ionic pollutants. The pollutants were measured as total dissolved solids (TDS), chemical oxygen demand (COD), ammonium-nitrogen (NH4–N), and nitrite (NO2–). The reactor performance was then analyzed using a regular two-level factorial design. The results showed that the electrochemical process effectively removed organic and inorganic pollutants. The highest removal was obtained at 33.3 mA/cm2 using the BDD, measured around 48, 82, 60, and 79% for TDS, COD, NH4–N, and NO2–, respectively. Meanwhile, the specific energy consumption for COD removal was estimated to reach 1.5 and 1.55 Wh/g for BDD and Pt, respectively. These results imply that the type of anodes and applied current densities significantly influence the treatment efficiency.
Źródło:
Journal of Ecological Engineering; 2022, 23, 12; 50--60
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cactus and Holm Oak Acorn for Efficient Textile Wastewater Treatment by Coagulation-Flocculation Process Optimization Using Box-Benhken Design
Autorzy:
Adachi, Abderrazzak
Soujoud, Radouane
El Ouadrhiri, Faiçal
Tarik, Moubchir
Hmamou, Anouar
Eloutassi, Noureddine
Lahkimi, Amal
Powiązania:
https://bibliotekanauki.pl/articles/24202904.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
coagulation-flocculation
textile wastewater
response surface methodology
decolorization
cactus
holm oak acorn
Opis:
In this study, the effectiveness of using natural bio-coagulants and bio-flocculants to treat textile wastewater through the coagulation-flocculation method was examined. These bio-based agents have several advantages over chemical agents, including biodegradability, natural abundance, low toxicity, and low cost. A bio-coagulant (holm oak acorn (HOA)) and a bio-flocculant (cactus juice) were used to investigate the capacity for turbidity removal and decolorization of textile wastewater. The UV spectrophotometer was used to characterize the discharges before and after treatment, and the chemical oxygen demand (COD) and biological oxygen demand (BOD5) levels were calculated. Box-Behnken design (BBD) coupled with response surface methodology (RSM) were utilized to optimize the process and reduce turbidity and decolorization in textile wastewater. The obtained results show that under the optimal conditions (0.5 g•L-1 of HOA, 15 mL•L-1 of cactus juice, and a pH of 7), decolorization and turbidity removal were achieved at 69% and 90%, respectively. This study demonstrates the potential of using bio-coagulants and bio-flocculants in the treatment of textile wastewater.
Źródło:
Journal of Ecological Engineering; 2023, 24, 6; 315--328
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ability of Response Surface Methodology to Optimize Photocatalytic Degradation of Amoxicillin from Aqueous Solutions Using Immobilized TiO2/Sand
Autorzy:
Sulaiman, Fadia A.
Alwared, Abeer I.
Powiązania:
https://bibliotekanauki.pl/articles/2086434.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
amoxicillin
solar photocatalyst
immobilized TiO2
sand
RSM
response surface methodology
kinetics
Opis:
The response surface method was applied to optimize operational factors in the solar photocatalytic process on the removal of Amoxicillin (AMOX) residues from aqueous solution using TiO2 immobilized on the sand as a catalyst. The results reveal that the degradation percentage of AMOX is 93.12%, when optimal conditions of pH=5, 75 mg/l of TiO2, 400 mg/l of H2O2, and 10 mg/l of AMOX concentration at 150 min irradiation time were used. Furthermore, the model’s expected response results have reasonable similarity with the actual data (R2 = 93.58%), demonstrating the efficiency of this method in making an accurate prediction. A second-order polynomial multiple regression model was used to evaluate the responses, which confirms that was a satisfactory adjustment with the achieved data through analysis of variance (R2 = 93.58%, R2adj = 91.48% and R2pred =89.68%). In addition, it is observed that the removal of undesirable compounds follows a pseudo-2nd order kinetic model with R2 = 0.9862. In conclusion, with the ease of usage of immobilized TiO2 and good photocatalytic efficiency, the findings showed the potential application to the antibiotics from an aqueous solution.
Źródło:
Journal of Ecological Engineering; 2022, 23, 5; 293--304
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Treatment of Petroleum Refinery Wastewater by Graphite–Graphite Electro Fenton System Using Batch Recirculation Electrochemical Reactor
Autorzy:
Kassob, Ali Nadhum
Abbar, Ali Hussein
Powiązania:
https://bibliotekanauki.pl/articles/2202176.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
advanced oxidation process
COD removal
electro-Fenton
porous graphite
response surface methodology
Opis:
Water pollution and the lack of access to clean water are general global problems that result from the expansion of industrial and agricultural activities. Petroleum refinery wastewaters are considered as a major challenge to the environment and their treatment is mandatory. The present work investigated the removal of chemical oxygen demand (COD) from petroleum refinery effluents generated from the Al-Dewaniya petroleum refinery plant located in Iraq by utilizing a novel graphite–graphite electro-Fenton (EF) system. The electrochemical reactor was a tubular type with a cylindrical cathode made from porous graphite and concentric porous graphite rode acts as an anode. By adopting the response surface methodology (RSM), the impacts of different operating variables on the COD removal were investigated. The optimal conditions were a current density of 25 mA/cm2, FeSO4 concentration of 1.4 mM, and electrolysis time of 90 minutes, which resulted in the COD removal efficiency (RE%) of 99% at a specific energy consumption (SEC) of 10.34 kWh/kg COD. The results indicated that both current density and concentration of FeSO4 have a major impact on the elimination of COD, while time has a minor effect. The adequacy of the model equation was demonstrated by its high R2 value (0.987). The present work demonstrated that the graphite–graphite EF system could be considered as an effective approach for removing of COD from petroleum refinery wastewaters.
Źródło:
Journal of Ecological Engineering; 2022, 23, 10; 291--303
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Designing Cement Mortars Modified with Cork and Rubber Waste Using Theory of the Experiment
Autorzy:
Dębska, Bernardeta
Krasoń, Joanna
Lichołai, Lech
Powiązania:
https://bibliotekanauki.pl/articles/124330.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
rubber waste
cork waste
cement mortars
Design of Experiments
DoE
Response Surface Methodology
RSM
Opis:
The article concerns the possibility of obtaining modified cement mortars and assessing their selected properties, i.e. bending and compressive strength, volume density of hardened mortars and water absorption. The modification consisted in a partial (0–50% vol.) substitution of sand by waste, crushed rubber, and cork. In the mortar design process, the theory of the experiment was used. The central composite design used available in the Statistica software package was response surface. This approach allowed to significantly reduce the number of experiments, reduce costs, and at the same time keep the maximum information about the mortars tested. The conducted research showed that waste materials can be an alternative to natural aggregates in the process of obtaining light mortars.
Źródło:
Journal of Ecological Engineering; 2019, 20, 9; 121-130
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimizing the Reduction of Total Suspended Solids in Pump Water from Fish Factories Through Electrocoagulation using Response Surface Methodology
Autorzy:
Aguilar-Ascón, Edwar
Neyra-Ascón, Walter
Albrecht-Ruiz, Miguel
Ibarra-Basurto, Alonso
Powiązania:
https://bibliotekanauki.pl/articles/1838313.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
total suspended solids
TSS
electrocoagulation
fish meal
fish pumping water
response surface methodology
optimization
Opis:
This study aims to optimize the removal of total suspended solids (TSS) in pump water from fish flour factories through electrocoagulation technology and to determine the effects of the main operation parameters. Pump water has high conductivity (40.1 mS), due to the presence of dissolved salts and contains high concentration of organic substances (12,360 mg/L of TSS and 520 mg/L of fats). In this study, pump water was treated in an electrocoagulation reactor with aluminum electrodes using Response Surface Methodology with a 3k factorial design based on two factors, current intensity (I) of 8-13 A and treatment time (t) of 20-40 minutes. The percentage of TSS removed from the water was used as the response variable. The results revealed that I and t significantly (p < 0.05) influenced the process. In accordance, the optimal operational parameters for TSS removal were I = 13 A and t = 30 minutes. Using these conditions, TSS removal efficiency of 99.9% was achieved. The sewage sludge generated with these optimal process conditions indicated 19.3% of ash content, 6.2% of salt, 1.7% of aluminum, 0.3% of iron, 0.4% of potassium, 256 ppm of zinc, and 2.1% of phosphorus. Hence, the results of this study affirm that electrocoagulation can be considered as a solution for marine pollution caused by fishing industries.
Źródło:
Journal of Ecological Engineering; 2021, 22, 6; 269-277
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimizing the Reduction of Total Suspended Solids in Pump Water from Fish Factories Through Electrocoagulation using Response Surface Methodology
Autorzy:
Aguilar-Ascón, Edwar
Neyra-Ascón, Walter
Albrecht-Ruiz, Miguel
Ibarra-Basurto, Alonso
Powiązania:
https://bibliotekanauki.pl/articles/1838335.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
total suspended solids
TSS
electrocoagulation
fish meal
fish pumping water
response surface methodology
optimization
Opis:
This study aims to optimize the removal of total suspended solids (TSS) in pump water from fish flour factories through electrocoagulation technology and to determine the effects of the main operation parameters. Pump water has high conductivity (40.1 mS), due to the presence of dissolved salts and contains high concentration of organic substances (12,360 mg/L of TSS and 520 mg/L of fats). In this study, pump water was treated in an electrocoagulation reactor with aluminum electrodes using Response Surface Methodology with a 3k factorial design based on two factors, current intensity (I) of 8-13 A and treatment time (t) of 20-40 minutes. The percentage of TSS removed from the water was used as the response variable. The results revealed that I and t significantly (p < 0.05) influenced the process. In accordance, the optimal operational parameters for TSS removal were I = 13 A and t = 30 minutes. Using these conditions, TSS removal efficiency of 99.9% was achieved. The sewage sludge generated with these optimal process conditions indicated 19.3% of ash content, 6.2% of salt, 1.7% of aluminum, 0.3% of iron, 0.4% of potassium, 256 ppm of zinc, and 2.1% of phosphorus. Hence, the results of this study affirm that electrocoagulation can be considered as a solution for marine pollution caused by fishing industries.
Źródło:
Journal of Ecological Engineering; 2021, 22, 6; 269-277
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance of Intermittent Slow Sand Filter Processing Units in Treating Food Court Wastewater
Autorzy:
Fitriani, Nurina
Mohamed, Radin Maya Saphira Radin
Affandi, Moch.
Nurdin, Rafly Rizqullah
Kurniawan, Setyo Budi
Ni'matuzahroh
Powiązania:
https://bibliotekanauki.pl/articles/24201671.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Anadara granosa
environmental pollution
FOG
intermittent slow sand filter
response surface methodology
TDS
TSS
turbidity
Opis:
This study aimed to determine the performance of modified slow sand filter (SSF) media with blood clam shells (Anadara granosa) and activated carbon to remove turbidity, TSS, TDS, and FOG on the food court wastewater. The concentration of water pollutant parameters processed by SSF was determined based on Indonesia water quality standards, as well as knowing the optimum operational parameters of intermittent slow sand filter with Response Surface Methodology (RSM). The research data was processed using the Optimal type (custom) design which consisted of independent factors including the type of filter media, the addition of bacteria to the grease trap pre-treatment unit, and running time, as well as the research response in the form of the effectiveness of removing turbidity, TSS, TDS, and FOG. The reactor was operated intermittently (48 hours) for a maximum of 22 days and the concentration of pollutant parameters was calculated using the Standard Methods. The results of the Analysis of Variance (ANOVA, p<0.05) in the 2FI model of the study showed that there was a significant effect of all independent factors on the effectiveness of removing all water pollutant parameters. The most optimal operational parameters were achieved with the type of activated carbon media, the addition of Bacillus sp. in the grease trap pre-treatment unit in the amount of as much as 1%, and the detention time of 4 days, with the effectiveness of removing turbidity reaching 39.53%; TSS 45.25%; TDS 19.30%; FOG 61.35%.
Źródło:
Journal of Ecological Engineering; 2023, 24, 4; 117--139
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Particle Size and Ramie Fiber Ratio on Hybrid Bio Panel Production from Oil Palm Trunk as Thermal Insulation Materials
Autorzy:
Mawardi, Indra
Nurdin
Fakhriza
Rizal, Samsul
Aprilia, Sri
Faisal, Muhammad
Jaya, Ramadhansyah Putra
Powiązania:
https://bibliotekanauki.pl/articles/2202371.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
oil palm trunk
hybrid bio panel
thermal insulation
particle size
ramie fibre ratio
RSM
response surface methodology
Opis:
The abundant availability of waste oil palm trunks is one of the potential fibers for new thermal insulation materials. While focusing on the manufacturing of thermal insulation materials, the main points to be considered are particle size, reinforcement fiber ratio, and press durations, besides binders type and temperature. This study aimed to optimize the manufacturing process of hybrid bio panels based on oil palm trunks as thermal insulation material. The response surface methodology (RSM), with a Box-Behnken Design (BBD), was used to model and optimize the manufacturing process variables. A total of 17 hybrid bio panels were in operation and the independent variables used were particle size, ramie ratio, and press duration. The dependent variables were water absorption, thickness swelling, MOR, and thermal conductivity. The hybrid bio panel obtained under the optimum conditions was characterized by thermogravimetric analysis to observe thermal stability. On the basis of analysis of variance and the contour plot, it was discovered that the interaction between particle size and ramie fiber ratio was a significant variable to optimize hybrid bio panel manufacture. The thermal resistance and modulus of rupture of hybrid bio panels also improved with higher particle size and ramie fiber ratio. The optimum manufacturing process was obtained at OPT particle size of 0.248 mm, ramie fiber ratio of 19.775, and press duration of 25 min. This condition produces a thermal conductivity of 0.079 W/mK, modulus of rupture of 17.702 MPa, water absorption of 54.428%, and thickness swelling of 21.974%. In addition, the hybrid bio panel resulted in thermal stability of 341 °C.
Źródło:
Journal of Ecological Engineering; 2023, 24, 2; 39--49
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies