Autor: (amar) - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The Effectiveness of Melt-Blown Filter Cartridge and UV-C Rays on the Reduction of Total Coliform and Water Hardness in Production Process Water
Autorzy:: Fikri, Elanda
Putri, Nursyifa Yuliani
Djuhriah, Nanny
Hanurawaty, Neneng Yetty
Khair, Amar Sharaf Eldin
Powiązania:: https://bibliotekanauki.pl/articles/2086408.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: melt blown
filter cartridge
ultraviolet C
UVC
total coliform
water hardness
Opis:: Water is one of the humans’ basic needs that are essential in daily lives. The water use related to the production of the food processing industry must at least meet the quality standards required for drinking water. The Production process water is obtained from the artesian well that has been treated with a physical treatment process. The microbiological examination result of total Coliform is 8.6 MPN/100 ml meaning that it does not meet the quality standard requirements, which is 0 MPN/100 ml (The Minister of Health Regulation Number 492 of 2010, concerning Drinking Water Quality Requirements), it is necessary to treat the production process water using a Melt Blown Filter (MBF) and UV-C rays. The purpose of this study was to determine the differences in the variation of the 1, 3, and 5-micron of Melt Blown Filter cartridge 10” in reducing the amount of total Coliform, as well as the water hardness and their effect on disinfection using UV-C rays. The type of research used is experimental research with a pretest-posttest without control research design. There is a reduction in the average total Coliform after the treatment using a Melt Blown Filter, with a result of 1, 3, and 5-micron as 2.95 MPN /100ml, 3.61 MPB/100 ml, and 7.31 MPN/100 ml with a percentage reduction of 100%, 94.5%, and 82.4%, respectively. The average total Coliform using the Melt Blown Filter equipped with the UV-C rays treatment resulted in a reduction of 1, 3, and 5-micron as 2.95 MPN/100 ml, 3.95 MPN/100 ml, 8.88 MPN/100 ml respectively, with a reduction percentage of 100%, for each treatment. The data analysis for total coliform using the One-Way ANOVA test resulted in a pvalue of 0.001, the effective variation obtained is 1-micron MBF equipped with UV-C rays. The analysis of results pertaining to the water hardness data showed that the use of Melt Blown Filter could not reduce water hardness, but the UV-C rays could still be used accordingly. The data analysis for water hardness was performed using KruskalWallis with a p-value of 0.820, meaning that there are no differences in Melt Blown Filter variation on the results of total water hardness value.
Źródło:: Journal of Ecological Engineering; 2022, 23, 4; 181--190
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The Phenomenon of Medical Waste Recycling in Indonesia: Contact Time and Chlorine Dose as a Disinfectant with the Bio-Indicator Bacillus subtilis and Bacillus stearothermophilus
Autorzy:: Fikri, Elanda
Kurniati, Iis
Wartiniyati, -
Prijanto, Teguh Budi
Pujiono, -
Syarief, Osman
Khair, Amar Sharaf Eldin
Powiązania:: https://bibliotekanauki.pl/articles/1839585.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: recycling
medical waste
dosage
duration of contact
chlorine
disinfection
Opis:: Efforts that have been done to manage the Hazardous and Toxic waste into non-Hazardous and Toxic waste are done by emptying, shredding, washing, and rinsing at least 3 times and disinfecting using chlorine. This is in accordance with the Indonesian Regulation of Ministry of Health No. 27 of 2017, which has stated that surface cleaning is permitted to use 0.05% chlorine during the process. Furthermore, in the Indonesian Regulation of the Ministry of Environment and Forestry No.56 of 2015, the chemical disinfection process is permitted to use an additional 3–6% sodium hypochlorite (NaOCl). However, there are still differences in dosage and it has not been mentioned regarding the immersion period during the disinfection process on both of the regulations. The purpose of this study was to determine the difference in contact time and the dose of chlorine as a disinfectant on the number of Bacillus subtilis and Bacillus stearothermophilus in the medical waste recycling process. The research design used in this study was a Randomized Factorial Design with experimental research type. A total of 104 recyclable medical waste samples were taken, using 3 treatments and 6 repetitions. The average temperature of the chlorine solution at the contact time of 15 minutes, 30 minutes, and 45 minutes was 24.34 °C; 24,53 °C; and 24,54 °C respectively, while the average pH of the chlorine solution at the contact time of 15 minutes, 30 minutes, and 45 minutes was 8.344; 8,375; and 8,461 respectively. The results showed that there was no difference in the duration of contact and the dose of chlorine as a disinfectant in the medical waste recycling process with a p-value of 0.377. The percentage reduction in the number of Bacillus subtilis and Bacillus stearothermophilus before and after treatment was 99.99% based on 4 positive controls. The findings in this study were the duration of contact time and the effective dose used in the recycling process of medical waste, which was at a dosage of 0.03% with 45 minutes of contact time. The government needs to conduct a re-assessment regarding the recommended ideal dosage in the surface disinfection process so that it would not cause a potential risk to humans or the environment.
Źródło:: Journal of Ecological Engineering; 2021, 22, 4; 47-58
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Physical Characteristics of Aceh Traditional Salt and Its Potential as Raw Material for Thermal Energy Storage
Autorzy:: Gunawati, -
Humaidi, Syahrul
Setiawan, Adi
Sirait, Makmur
Jalil, Zulkarnain
Ramadhani, Nadilla
Makruf, Amar
Riskina, Shafira
Irhamni, -
Powiązania:: https://bibliotekanauki.pl/articles/2026731.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: aceh salt
enthalpy
thermal conductivity
thermal energy storage
Opis:: Thermal energy storage is an important element in order to conserve the energy and optimize the overall efficiency. Development of energy storage system for local purposes requires some information on the raw material which is abundantly available in the local market. This study aimed to investigate the characteristics of traditionally produced salt in Aceh in terms of its potential use as a raw material for thermal energy storage. The sample was collected from the Aceh Besar District and treated by heating at temperatures of 400 °C and 800 °C in a muffle furnace. This treatment is carried out to study the changes in properties and define the best procedure for salt preparation. All samples were characterized under a number of techniques including XRF, XRD, SEM/EDS, TGA/DSC analysis, density, thermal conductivity, and electrolytic conductivity. The XRF characterization showed that the local Aceh salt was graded as a category III salt. Furthermore, according to the TGA/DSC characterization, the melting temperature is close to 800 °C, and the enthalpy value is close to 492 kJ/kg. It is ample evidence that the Aceh salt can be used as a thermal energy storage material. Furthermore, increasing the temperature of local salt’s heat treatment contributes to increasing the enthalpy value, crystal size, density, thermal conductivity, and electrolyte conductivity.
Źródło:: Journal of Ecological Engineering; 2022, 23, 2; 116-122
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Effect of Zeolite and Activated Carbon Thickness Variation as Adsorbent Media in Reducing Phenol and Manganese Levels in Wastewater of Non-Destructive Testing Unit
Autorzy:: Fikri, Elanda
Farid, Reta Athaya Mutiara
Septiati, Yosephina Ardiani
Djuhriah, Nanny
Hanurawaty, Neneng Yetty
Khair, Amar Sharaf Eldin
Powiązania:: https://bibliotekanauki.pl/articles/2173279.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: NDT wastewater
non-destructive testing wastewater
adsorption
zeolite
activated carbon
phenol
manganese
Opis:: The production wastewater contains phenol from the Non-Destructive Testing (NDT) unit because it uses solvents; meanwhile, the manganese originates from the metal material washing process. On the basis of laboratory test results, the wastewater originating from the NDT unit of Y Industry, resulted in a phenol level of 2.33 mg/L, exceeding the quality standard of 0.5 mg/L and manganese level of 14.13 mg/L that exceeded the quality standard of 2 mg/L, based on the Regulation of the Minister of the Environment Number 5 of 2014 concerning Wastewater Quality Standards. This research used the pretest-posttest experimental research design without control. The sample in this study was wastewater from the NDT unit of the Y Industry. The average phenol level after passing through the adsorbent media at a thickness of 40 cm, 60 cm, and 80 cm resulted in 0.99 mg/L with 63% reduction, 0.60 mg/L with 77% reduction, and 0,28 mg/L with 89% reduction, respectively. The average manganese level after passing through the adsorbent media at a thickness of 40 cm, 60 cm, and 80 cm resulted in 0.10 mg/L with 61% reduction, 0.06 mg/L with 76% reduction, and 0,05 mg/L with 80% reduction, respectively. The most effective thickness variation in reducing the phenol and manganese levels of NDT wastewater is 80 cm thickness.
Źródło:: Journal of Ecological Engineering; 2022, 23, 8; 40--48
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "(amar)" wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język