Autor: Dobrzanska, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The modern approach to manufacturing of carbon-rhenium nanocomposites
Autorzy:: Dobrzańska-Danikiewicz, A. D.
Wolany, W.
Powiązania:: https://bibliotekanauki.pl/articles/2201076.pdf
Data publikacji:: 2022
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: rhenium
MWCNTs
multiwall carbon nanotubes
nanocomposites
high-temperature method
SEM
scanning electron microscope
TEM
transmission electron microscopy
ren
wielościenne nanorurki węglowe
nanokompozyt
skaningowa mikroskopia elektronowa
transmisyjna mikroskopia elektronowa
Opis:: Purpose The aim of the paper is to present the high-temperature method of producing MWCNTs-Re nanocomposites, the selection of satisfactory production conditions and the presentation of the results of microscopic and spectroscopic studies of nanocomposites produced by this method. Design/methodology/approach Two methods of manufacturing carbon-rhenium nanocomposites were tested: ineffective chemical synthesis and high-temperature reduction using H2, which was proven successful and allowed the production of nanocomposites with the expected properties. The received nanocomposites were investigated using Transmission Electron Microscope (TEM), and Scanning Electron Microscope (SEM), as well as were subjected to spectroscopic examination. Findings The article presents three steps of MWCNTs-Re nanocomposites fabrication using the high-temperature method, functionalization, impregnation and reduction. As part of own work, satisfactory conditions for producing those nanocomposites using a materials science and heuristic analysis were selected. Research limitations/implications The proposed high-temperature method allows to join rhenium nanoparticles with MWCNTs permanently. It is reasonable to test in the future whether the method is also effective for other carbon nanomaterials and/or nanoparticles of other metals. Practical implications MWCNTs-Re nanocomposites can be used as sensors of gases that are harmful to the environment. It was also confirmed that the MWCNTs-Re_4 nanocomposite has catalytic properties. Originality/value The paper presents a modern approach to the manufacturing of MWCNTs-Re nanocomposites, which assumes the use of a high-temperature furnace to heat the material in a hydrogen atmosphere.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2022, 115, 2; 57--63
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Powiązania:: https://bibliotekanauki.pl/articles/367488.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
manufacturing of powder products
manufacturing technologies thick-layer coatings using powders
dendrological matrix of the technologies potential and attractiveness
holistic augmented Industry 4.0 model
inżynieria proszkowa
produkcja produktów proszkowych
technologie wytwarzania
powłoka grubowarstwowa
matryca dendrologiczna
przemysł 4.0
Opis:: Purpose: The paper is a comprehensive review of the literature on manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics. Design/methodology/approach: Extensive literature studies on manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics have been carried out. The paper is illustrated with examples of various structure images obtained as part of research of engineering materials made by authors with powders. By using knowledge engineering methods, development perspectives of individual technologies were indicated. Findings: The manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics as the advanced digital production (ADP) technologies are proves the highest possible potential and relatively good attractiveness, as well as their fully exploited attractiveness or substantial development opportunities in this respect. Originality/value: According to augmented holistic Industry 4.0 model, many materials processing technologies and among them manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics are becoming very important among product manufacturing technologies. They are an essential part of powder engineering.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2020, 99, 1; 14-41
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Overview of conventional technologies using the powders of metals, their alloys and ceramics in Industry 4.0 stage
Autorzy:: Dobrzański, L. A.
Dobrzański, L. B.
Dobrzańska-Danikiewicz, A. D.
Powiązania:: https://bibliotekanauki.pl/articles/368149.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: powder engineering
conventional powders manufacturing methods
powder metallurgy
liquid phase sintering
in solid-state sintering
manufacturing of powder products
holistic augmented Industry 4.0 model
inżynieria proszkowa
konwencjonalne metody wytwarzania proszków
metalurgia proszków
faza ciekła spiekania
spiekanie w fazie stałej
produkcja produktów proszkowych
przemysł 4.0
Opis:: Purpose: Among the technologies that play a crucial role in the current stage of development of Industry 4.0 conventional powder engineering technologies are of great importance. Based on a comprehensive literature review, conventional technologies using the powders of metals, their alloys and ceramics are described. Development perspectives of the most widespread among them were indicated. Design/methodology/approach: Extensive literature studies on conventional powder engineering technologies have been carried out. By using knowledge engineering methods, development perspectives of individual technologies were indicated. Findings: In addition to the presentation of conventional sintering technological methods, sintering mechanisms in solid-state and liquid phase sintering which accounts for 90% of the commercial value of sintered products are presented. Originality/value: According to augmented holistic Industry 4.0 model, many materials processing technologies and among them conventional powder engineering technologies play a key role in current industry development. For this reason, these technologies have been characterized in detail on the basis of available literature sources.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2020, 98, 2; 56-85
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The digitisation for the immediate dental implantation of incisors with immediate individual prosthetic restoration
Autorzy:: Dobrzański, L. B.
Achtelik-Franczak, A.
Dobrzańska, J.
Dobrzański, L. A.
Powiązania:: https://bibliotekanauki.pl/articles/368724.pdf
Data publikacji:: 2019
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: surgical guide
immediate implant prosthetic restoration
individual abutments
dental implant
3D printing
CNC milling
computed tomography with cone beam
uzupełnienie protetyczne
łącznik
implant stomatologiczny
druk 3D
frezowanie CNC
stożkowa tomografia komputerowa
Opis:: Purpose: The purpose of this study is to present the author's method of planning the procedure of immediate implant-prosthetic restoration in place of a tooth qualified for removal by performing a surgical template and implant-prosthetic restoration based on data obtained in the CBCT test and intraoral scanning 3D model. Design/methodology/approach: The method of planning the implant surgery through the design and manufacture of surgical templates and implant prostheses performed before the start of medical procedures was described on the basis of actual clinical data from patients with anterior segment teeth qualified for extraction for reasons of complications after endodontic treatment. The placement of the implant was planned using virtual reality, where the bone model and the virtual soft tissue model were combined, which made it possible to perform a surgical template and prosthetic implant restoration. For the manufacturing, 3D printing as stereolithography SLA and selective laser sintering SLS for the surgical template manufacturing and CNC milling in the case of the prosthetic implant were used for restoration. Findings: The method allows planning the implant position based on two connected bone and soft tissue models and allows to design and manufacture a surgical guide. In this way, it becomes possible to place implants in the patient's bone during surgery procedure in the planned position and to install the prosthetic implant restoration in the form of an individual abutment and a PMMA crown during the same procedure in the surgical part. Practical implications: Thanks to the method of computer-aided design/manufacturing CAD/CAM production of surgical templates and prosthetic restoration based only on digital models and the planned position of the implant, it is possible to carry out the procedure of immediate tooth extraction and replacement with permanent prosthetic restoration. The whole process is based on the CBCT test performed at the beginning. The presented method allows shortening the procedure time by four times and the rehabilitation time by 3-6 months when performing the procedure in a minimally invasive manner. Originality/value: This article presents the original design and production method of surgical guides. It allows for precise planning of the implant position and transfer of this data to the patient's mouth during the procedure, enabling permanent prosthetic restoration before starting medical procedures.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2019, 97, 2; 57-68
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Dobrzanska, A." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język