Temat: flow efficiency - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental testing of the influence of the operating loading on the flow characteristics of hydraulic pump
Autorzy:: Kosiba, Ján
Tkáč, Zdenko
Jablonický, Juraj
Shcherbak, Valeriia
Ganushchak-Yefimenko, Liudmyla
Paumer, Martin
Bukoros, Tetiana
Čurgaliová, Gabriela
Zachar, Martin
Powiązania:: https://bibliotekanauki.pl/articles/2175138.pdf
Data publikacji:: 2022
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:: hydraulics
hydraulic device
flow efficiency
Opis:: The contribution deals with the influence of the operating loading on the flow characteristics of the hydraulic pump under laboratory conditions. In the test, a new toothed hydraulic pump and hydraulic oil with kinematic viscosity at 40°C, ν = 64.2 mm2.s-1 were used. The operational loading was measured during the most difficult agrotechnical operation – ploughing, at which the loading of the hydraulic pump is the greatest. Laboratory testing was determined for 200 hours, and the flow characteristics had been detected at 50 hours intervals. Measurement of the flow characteristics was performed at rated speed n = 1,000 rpm. Measurement of the flow characteristics was carried out in dependence on the loading pressure from p = 0 MPa to p = 20 MPa. When p = 0 MPa, the value reached n = 91.70% and when p = 20 MPa, n = 86.68%. Running-in of the hydraulic pump lasted 150 hours, with an increase of the flow characteristics Δηvol = 1.36% (p = 10 MPa) compared to the initial state. After working for 200 hours, the flow rate of the hydraulic pump decreases compared to 150 hours.
Źródło:: Eksploatacja i Niezawodność; 2022, 24, 3; 583--589
1507-2711
Pojawia się w:: Eksploatacja i Niezawodność
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Investigation into the Flow of Gas-Solids during Dry Dust Collectors Exploitation, as Applied in Domestic Energy Facilities – Numerical Analyses
Autorzy:: Maćkowiak, Albert
Kostrzewski, Mariusz
Bugała, Artur
Chamier-Gliszczyński, Norbert
Bugała, Dorota
Jajczyk, Jarosław
Woźniak, Waldemar
Dombek, Grzegorz
Nowak, Karol
Powiązania:: https://bibliotekanauki.pl/articles/28086943.pdf
Data publikacji:: 2023
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:: the efficiency of dust extraction
energy consumption
multi-phase flow transport
technological transport
computational fluid dynamics
dust collector
Opis:: The paper presents the results related to the simulation of dust-separating tangential cyclones: single cyclones of various geometries, and an axial multi-cyclone with fixed geometries and components. Its goal was to apply low-cost analyses for cyclones in industrial realization. Therefore, the presented research was applied with simulation methodology as a problem of Computational Fluid Dynamics. The models were analyzed using SolidWorks Flow Simulation software. The presented dust collectors are real-life objects, applied in industrial facilities. For a multi-cyclone, the increase in the number of blades, from 5 to 8, together with the change in the angle of a blade’s pitch i.e., 30° and 45°, resulted in dust concentration along the internal walls from just 10% for 5 blades up to c.a. 37.5% for 6 blades, and c.a. 50% for 8 blades, whereas the dust concentration in the device’s central part equals c.a. 20% for the last option. The model validation draws attention to the potential applicability of the software in flow issues alongside common and more complex numerical environments.
Źródło:: Eksploatacja i Niezawodność; 2023, 25, 4; art. no. 174095
1507-2711
Pojawia się w:: Eksploatacja i Niezawodność
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "flow efficiency" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język