Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "komora wstępna" wg kryterium: Temat


Wyświetlanie 1-8 z 8
Tytuł:
Optical investigation of prechamber combustion in an RCEM
Autorzy:
Kotzagianni, Maria
Kyrtatos, Panagiotis
Boulouchos, Konstantinos
Powiązania:
https://bibliotekanauki.pl/articles/133545.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
scavenged prechamber
optical measurements
ignition timing
oczyszczona komora wstępna
pomiary optyczne
czas zapłonu
Opis:
In this study, detailed investigations of scavenged prechamber engine combustion are performed experimentally in a Rapid Compression Expansion Machine (RCEM), which allows optical access into the main chamber. OH* chemiluminescence measurements combined with pressure measurements are used to study the effect of varying ignition timing on combustion and cycle-to-cycle variations. The variation of ignition timing (pressure at ignition) showed an optimum ignition point for a given injection duration. Earlier ignition resulted in weaker but more reactive jets, coupled to increased cyclic variations. Later ignition did not significantly affect heat release rate, but increased cyclic variation.
Źródło:
Combustion Engines; 2019, 58, 1; 10-15
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental comparison of efficiency and emission levels of four-cylinder lean-burn passenger car-sized CNG engines with different ignition concepts
Autorzy:
Soltic, Patric
Hilfiker, Thomas
Hutter, Richard
Hänggi, Severin
Powiązania:
https://bibliotekanauki.pl/articles/133343.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
dual-fuel
diesel pilot
spark ignition
prechamber
silnik dwupaliwowy
silnik Diesla
zapłon iskrowy
komora wstępna
Opis:
Today’s passenger car CNG engines are based on petrol engines which typically have restrictions preventing the exploitation of the full potential of methane based fuels, especially if they have to be operated also on petrol as a second fuel. Additionally, the use of threeway-catalysis limits the engine operation to λ = 1. Here, we present the efficiency potential and the raw emission characteristics for a dedicated four cylinder passenger car CNG engine without sticking to the usual combustion peak pressure and λ limitations. Lean combustion reduces the knocking tendency but, because of the higher pressure levels, increases the ignition energy demand. Therefore, different ignition systems (spark plug, prechamber, Diesel pilot) have been used.
Źródło:
Combustion Engines; 2019, 58, 1; 27-35
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lean-burn CNG engine with ignition chamber: from the idea to a running engine
Autorzy:
Weißner, Michael
Beger, Frank
Schüttenhelm, Martin
Tallu, Gunesh
Powiązania:
https://bibliotekanauki.pl/articles/133168.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
CNG
scavenged prechamber
lean combustion
ignition system
efficiency
oczyszczona komora wstępna
spalanie ubogie
układ zapłonowy
wydajność
Opis:
Current and further developing CO2 and emission regulations worldwide and the competition to full electric mobility deliver a challenge for internal combustion engines in general. A state of the art solution is the use of natural gas mainly contending methane to reduce CO2 significantly and to offer lowest emission levels. The EU-funded project GasOn developed engine concepts to fully exploit the advantages of CNG. This article describes the development of an innovative, monovalent engine dedicated to Compressed Natural Gas (CNG) and characterised by the lean burn concept and the innovative pre-chamber combustion.
Źródło:
Combustion Engines; 2019, 58, 1; 3-9
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possible applications of prechambers in hydrogen internal combustion engines
Autorzy:
Matla, Jędrzej
Powiązania:
https://bibliotekanauki.pl/articles/2202513.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
hydrogen combustion
hydrogen knock
prechamber
H2ICE
combustion engine
spalanie wodoru
stuk wodorowy
komora wstępna
silnik spalinowy
Opis:
In order to ensure better control of the combustion process in a internal combustion engine powered by hydrogen, it has been proposed to use a split combustion chamber solution. Following paper contains a description of a hydrogen combustion system that includes an analysis of possible technical solutions. The considerations take into account the issues of the dual nature of hydrogen knocking and the problem of burning a stratified charge of a hydrogen-air mixture in a cylinder.
Źródło:
Combustion Engines; 2022, 61, 4; 77--82
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of fuel and turbulence distributions in an automotive-sized scavenged pre-chamber
Autorzy:
Bolla, Michele
Shapiro, Evgeniy
Kotzagianni, Maria
Kyrtatos, Panagiotis
Tiney, Nick
Boulouchos, Konstantinos
Powiązania:
https://bibliotekanauki.pl/articles/133134.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
scavenged prechamber
Reynolds-averaged Navier-Stokes
RANS
large-eddy simulation
LES
mixture formation
oczyszczona komora wstępna
tworzenie mieszanki
Opis:
This article presents a numerical study of the fuel and turbulence distributions in a pre-chamber at spark-time. The study has been conducted in the framework of the H2020 Gas-On project, dealing with the development of a lean-burn concept for an automotive-sized gas engine equipped with a scavenged pre-chamber. The test case considered studies a 7-hole pre-chamber with circumferentially-tilted orifices mounted on the cylinder head of a rapid compression-expansion machine (RCEM), consistent with the experimental test rig installed at ETH Zurich. An accurate description of turbulence and fuel distributions are key quantities determining the early flame development within the pre-chamber. Both quantities have an influence on the overall combustion characteristics and therefore on the engine performance. For this purpose, computational fluid dynamics (CFD) is employed to complement experimental investigations in terms of data completeness. The performance of the Reynolds-averaged Navier-Stokes (RANS)-based turbulence model is compared with large-eddy simulation (LES) through ensemble averaging of multiple LES realizations, in which the fuel injection rate evolution into the pre-chamber has been perturbed. Overall, RANS results show that the distributions of the turbulent kinetic energy and fuel concentration at spark-time agree well with the LES ensemble-averaged counterparts. This constitutes a prerequisite in view of the combustion phase and the accuracy reported provides further confidence in this regard.
Źródło:
Combustion Engines; 2019, 58, 1; 61-67
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influences of the pre-chamber orifices on the combustion behavior in a constant volume chamber simulating pre-chamber type medium-speed gas engines
Autorzy:
Wakasugi, Takuya
Tsuru, Daisuke
Tashima, Hiroshi
Powiązania:
https://bibliotekanauki.pl/articles/2202520.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
gas engine
prechamber
torch flame
combustion visualization
natural gas
silniki gazowe
komora wstępna
płomień palnika
wizualizacja spalania
gaz ziemny
Opis:
The study aims to clarify the influence of pre-chamber (PC) configurations on the combustion process in the main chamber (MC) of medium-speed spark-ignition gas engines equipped with an active PC. A constant volume combustion chamber was prepared to simulate the chamber configurations of the gas engines. A high-speed shadowgraph was applied to visualize the torch flame development and the combustion process in the MC. Experiments were done by changing the charged gas in the MC, the number, and the diameter of the PC orifices. Combustion was most accelerated when the PC orifice configuration was set appropriately so that the adjacent torch flames would combine with each other. It was also found that the unburned mixture in the PC, which ejected prior to the torch flame, supported the penetration of the torch flame.
Źródło:
Combustion Engines; 2022, 61, 4; 66--76
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prechamber optimal selection for a two stage turbulent jet ignition type combustion system in CNG-fuelled engine
Autorzy:
Pielecha, Ireneusz
Bueschke, Wojciech
Skowron, Maciej
Fiedkiewicz, Łukasz
Szwajca, Filip
Powiązania:
https://bibliotekanauki.pl/articles/133967.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
gas engine
prechamber
thermodynamic analysis
combustion
exhaust emission
optimization
silnik gazowy
komora wstępna
analiza termodynamiczna
spalanie
emisja spalin
optymizacja
Opis:
Searching for further reduction of fuel consumption simultaneously with the reduction of toxic compounds emission new systems for lean-mixture combustion for SI engines are being discussed by many manufacturers. Within the European GasOn-Project (Gas Only Internal Combustion Engines) the two-stage combustion and Turbulent Jet Ignition concept for CNG-fuelled high speed engine has been proposed and thoroughly investigated where the reduction of gas consumption and increasing of engine efficiency together with the reduction of emission, especially CO2 was expected. In the investigated cases the lean-burn combustion process was conducted with selection of the most effective pre-combustion chamber. The experimental investigations have been performed on single-cylinder AVL5804 research engine, which has been modified to SI and CNG fuelling. For the analysis of the thermodynamic, operational and emission indexes very advanced equipment has been applied. Based on the measuring results achieved for different pre-chamber configurations the extended methodology of polioptimization by pre-chamber selection and the shape of main chamber in the piston crown for proposed combustion system has been described and discussed. The results of the three versions of the optimization methods have been comparatively summarized in conclusions.
Źródło:
Combustion Engines; 2019, 58, 1; 16-26
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study on combustion characteristics of lean premixed CH4/air mixtures in RCM using spark ignition and turbulent jet ignition in terms of orifices angular position change
Autorzy:
Bueschke, Wojciech
Skowron, Maciej
Wisłocki, Krzysztof
Szwajca, Filip
Powiązania:
https://bibliotekanauki.pl/articles/973119.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
CNG
turbulent jet ignition
prechamber
optical analysis
flame development
heat release rate
turbulentny zapłon odrzutowy
komora wstępna
analiza optyczna
szybkość wydzielania ciepła
Opis:
The increase in ignitability consist a main aim of implementation of the turbulent jet ignition (TJI) in relation to the combustion of diluted charges. Such an ignition system has been introduced to the lean-burn CNG engine in the scope of GasOn-Project (Gas Only Internal Combustion Engines). In this study the impact of TJI application on the main combustion indexes has been investigated using RCM and analyzed on the bases of the indicating and optical observations data. The images have been recorded using LaVision HSS5 camera and post-processed with Davis software. Second part of the study based on indicating measurements consist the analysis of combustion regarding the variation in the geometry of pre-chamber nozzles. It has been noted, that combustion with TJI indicates significantly bigger flame luminescence and simultaneously - faster flame front development, than the combustion initiated with conventional SI. The positive impact of nozzles angular position on engine operational data has been found in the static charge movement conditions, regarding the combustion stability.
Źródło:
Combustion Engines; 2019, 58, 1; 36-41
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies