Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Diesel engine" wg kryterium: Temat


Tytuł:
Investigation of processes in the WLTC test of a passenger car with a diesel engine
Autorzy:
Andrych-Zalewska, Monika
Powiązania:
https://bibliotekanauki.pl/articles/24202473.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust emission
WLTC test
silnik diesla
emisja spalin
test WLTC
Opis:
The test results and their analysis was discussed in this article. The tests were carried out in accordance with the WLTP (Worldwide Light Duty Test Procedure), on a passenger car with a compression ignition engine. The analysis was conducted doe the following variables: vehicle speed, exhaust emission rate and fuel consumption volumetric rate. The subject of the research are exhaust emission components that are harmful to the health of living organisms: carbon monoxide, hydrocarbons and nitrogen oxides, as well as greenhouse gases. The research results have shown a very large range of values for carbon monoxide, organic compounds and nitrogen oxides emission rate characteristics. The average distance-specific emissions values of carbon monoxide, organic compounds and nitrogen oxides were very small and were in line with the Euro 6 requirements within a large margin. Correlation studies of the measured variables were conducted - between vehicle speed and exhaust emission rate as well as volumetric fuel consumption rates, and between exhaust emission rates and volumetric fuel consumption rates. The correlation studies have shown that the highest coefficient of determination in relation to vehicle speed was found for volumetric fuel consumption and carbon dioxide emission rate, and the weakest correlation for carbon monoxide emission rate and nitrogen oxides emission rate. The correlation between the rate of volumetric fuel consumption and carbon dioxide emission, as well as for hydrocarbon emission and methane emission rates, was found to be the strongest. The carbon monoxide emission rate was the least correlated with all the other measured variables. Dimensionless statistical characteristics of the measured variables were determined, such as: extreme values, range, mean value, median, standard deviation, kurtosis, skewness and coefficient of variation. For all of them, the mean value was much greater than the median, and the standard deviation was greater still, than both of those values. The numerical distributions for the values of exhaust emission rate and volumetric fuel consumption turned out to be leptokurtic and have right-sided asymmetry. The coefficient of variation analysis made it possible to assess that the most dynamic properties could be observed in organic compounds emission rate, followed by carbon monoxide and nitrogen oxides emission rates, and finally - the vehicle speed. Histograms of the examined processes were determined. The vehicle speed histogram was characterized by relative uniformity apart from the dominance of the idle speed. Histograms of exhaust emission rate variables were most frequently dominated by small values. The zero values occurred less frequently for the fuel consumption volumetric rate histogram. Based on the conducted research and the obtained data, a set of conclusions was drawn.
Źródło:
Combustion Engines; 2023, 62, 3; 52--62
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of BSFC and effective NOx and PM reduction by high EGR rates in heavy duty diesel engine
Autorzy:
Aoyagi, Y.
Powiązania:
https://bibliotekanauki.pl/articles/133188.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust emissions
turbocharger
fuel injection
silnik diesla
emisja spalin
turbodoładowanie
wtrysk paliwa
Opis:
The test engine was a turbocharged 10.5L engine with an intercooler. A performance target was set at a rated power of 300 kW (BMEP = 1.7 MPa) and peak torque of 1842 Nm (BMEP = 2.2 MPa). Emission targets were set at a level of near future and stringent regulation standards in Japan. The engine was equipped with new technologies such as a high pressure common rail system, FCD piston, a high pressure ratio VGT and an aftertreatment system. The high and low pressure loop EGR system was installed and this system with a VGT had a high performance and could increase an EGR rate in order to reduce BSNOx while maintaining the satisfied BSFC and PM performance simultaneously not only in the steady state condition but also in the transient condition.
Źródło:
Combustion Engines; 2017, 56, 4; 4-10
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of flame temperature and soot amount for effective NOx and PM reduction in a heavy duty diesel engine
Autorzy:
Aoyagi, Yuzo
Powiązania:
https://bibliotekanauki.pl/articles/132846.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
Diesel engine
exhaust emissions
NOx
PM
EGR
BSFC
flame temperature
two-color method
video camera
silnik Diesla
emisje spalin
temperatura płomienia
metoda dwubarwowa
kamera wideo
Opis:
To reduce exhaust NOx and smoke, it is important to measure flame temperature and soot amount in combustion chamber. In diesel combustion it is effective to use the two-color method for the measurement of the flame temperature and KL factor, which is related with soot concentration. The diesel flame was directly and continuously observed from the combustion chamber at running engine condition by using a bore scope and a high-speed video camera. The experimental single cylinder engine has 2.0-liter displacement and has the ability with up to five times of the boost pressure than the naturally aspirated engine by external super-charger. The devices of High Boost, Wide Range and High EGR rate at keeping a relatively high excess air ratio were installed in this research engine in order to reduce exhaust NOx emission without smoke deterioration from diesel engines. The video camera nac GX-1 was used in this study. From observed data under the changing EGR rates, the flame temperature and KL factor were obtained by the software of two-color method analysis. The diesel combustion processes are understood well by analyzing high-speed movies of the diesel flame motion and its temperature. The NOx and smoke are mutually related to maximum flame temperature and also it is possible to reduce simultaneously both NOx and soot emissions by high EGR rate in a single cylinder diesel engine.
Źródło:
Combustion Engines; 2019, 58, 4; 32-39
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model of exhaust system of a traction diesel engine with pulse supercharging on transient modes
Autorzy:
Babel, M.
Kossov, E.
Powiązania:
https://bibliotekanauki.pl/articles/133517.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
locomotive
mathematical model
pulse supercharging
exhaust system
transient process
silnik spalinowy
lokomotywa
model matematyczny
układ odprowadzania spalin
procesy przejściowe
Opis:
A mathematical model of joint operation of a piston engine with pulse turbine drive, compressor as well as air supply of a diesel locomotive is presented in the article. This model in an integral part of the complex engine-generator power unit of a diesel locomotive in steady states and transient conditions, developed by the authors. The periodic process in the exhaust manifold is represented as two specific characteristic ranges which encompass the process of forced exhaust and the scavenging process. The scavenging calculation is carried out jointly with the processes taking place in the inlet manifold of the engine, including inlet devices of the locomotive. The process of forced exhaust is calculated separately from the inlet processes and doesn`t require usage of empirical coefficients of impulsiveness. Both processes are represented as systems of nonlinear algebraic equations describe in the quasi-steady flow of working fluid in the elements of the inlet and exhaust tracts. The gas-dynamic calculation of the turbine in the transition process is conducted while taking into account changes in flow angles on the rotor blades. As a result of numerical calculation of the a8S22W diesel operational indices in transient modes, a satisfactory compliance of the calculated and the experimental results was obtained.
Źródło:
Combustion Engines; 2017, 56, 1; 38-45
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of physicochemical properties of fuels on ecological parameters of a diesel engine
Autorzy:
Balawender, K.
Konieczny, D.
Kuszewski, H.
Lejda, K.
Lew, K.
Wojewoda, P.
Powiązania:
https://bibliotekanauki.pl/articles/133375.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
fuel properties
diesel engine
ecological parameters
właściwości paliw
silnik spalinowy
parametry ekologiczne
Opis:
The objective of the research results of which are presented in this paper was to determine the effect of selected physicochemical properties of fuels on ecological parameters of a diesel engine. Physicochemical parameters of fuel have a decisive effect on correct functioning, operating parameters, and cleanliness of the exhaust gas emitted to the environment by any combustion engine. Results of physicochemical studies can be useful in developing fuels blends of specific properties, whereas results obtained in the course of tests carried out on an engine test bench allow to optimize parameters of the fuel injection process with the aim to reduce emissions of toxic compounds to atmosphere.
Źródło:
Combustion Engines; 2017, 56, 4; 274-278
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of dual-fuel (diesel + natural gas) particle matter and CO2 emissions of a heavy-duty diesel engine during transient operation
Autorzy:
Barroso, P.
Ribas, X.
Pita, M.
Dominguez, J.
De Seia, E.,
García, J.-M.
Powiązania:
https://bibliotekanauki.pl/articles/134220.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
dual fuel
natural gas
diesel engine
heavy-duty
transient
particle matter
CO2
silnik dwupaliwowy
gaz ziemny
silnik spalinowy
cząstki stałe
dwutlenek węgla
Opis:
The aim of this study is to describe the impact on particle matter and CO2 emissions of converting an existing heavy-duty diesel engine for on-highway truck applications to a dual-fuel engine (diesel + natural gas), especially in transient operation. A dual-fuel engine with homogeneous gas charge injection in the intake line before turbocharger was considered. The results showed the feasibility of this kind of technology for transient operation reaching a significant reduction of particle matter plus a decrement in CO2 emissions at the expense of a small decrement of brake fuel conversion efficiency and an increment of unburned hydrocarbons in the exhaust gases.
Źródło:
Combustion Engines; 2013, 52, 2; 3-11
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of emission indicators harmful compounds for assessment of dynamic state of a marine diesel engine
Autorzy:
Bogdanowicz, Artur
Zadrąg, Ryszard
Powiązania:
https://bibliotekanauki.pl/articles/133688.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
dynamic states
emission
marine diesel engine
stany dynamiczne
emisja
okrętowy silnik tłokowy
Opis:
The operation of a ship's propulsion system is a variable process in time, which is described in both static and dynamic states. The mutual proportions between them depend primarily on a type of ship and tasks to which it was designed. In a case of special units of particular use (e.g. warships) and ships, which operate on narrow waters such as canals or port basins, participation of dynamic states is increasing significantly. Hence a necessity to analyze the dynamic states of marine diesel engines, among others in terms of their increased harmful compounds emission. The paper presents a methodology of engine dynamic state analysis, emission indicators that can be used to assess the dynamic state of a ship have been proposed. As an example of application, the analysis of harmful compounds emissions during dynamic states while a real cruise of navy ship has been carried out. It has been also proposed to use simple dynamics indicators such as single-base and chain indexes to describe the change in concentrations of harmful compounds in dynamic states.
Źródło:
Combustion Engines; 2019, 58, 3; 247-251
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of concentrations harmful compounds from main ship’s propulsion engine cooperating with a fixed pitch propeller in dynamic states
Autorzy:
Bogdanowicz, Artur
Kniaziewicz, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/132880.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
simulation
modelling
emission
marine diesel engine
symulacja
modelowanie
emisja
okrętowy silnik tłokowy
Opis:
The article presents a mathematical model of a marine propulsion system and a computer program based on the LabVIEW environment. For a purpose of model construction, a ship's hull resistance was identified and an approximation equations of the Wageningen institute for ship propellers were used. The ship's motion equations were used to build the propulsion system model. On the basis of conducted tests of Sulzer 6AL20 / 24 marine engine, a map of concentrations harmful compounds was created in various load state and transferred to a computer program.
Źródło:
Combustion Engines; 2019, 58, 3; 51-55
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The emission of harmful compounds from the marine diesel engine fueled by a blend of n-butanol and marine fuel
Autorzy:
Bogdanowicz, Artur
Kniaziewicz, Tomasz
Zadrąg, Ryszard
Powiązania:
https://bibliotekanauki.pl/articles/2097614.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
emission
marine diesel engine
n-butanol
marine fuel blend
emisja
okrętowy silnik spalinowy
żeglugowa mieszanka paliwowa
Opis:
The use of renewable fuels may be an action leading to the reduction of pollutant emissions. This group includes biobutanol as a product of biomass fermentation. Some of its physicochemical properties, including the ability to mix with hydrocarbon fuels, make it suitable for use as a fuel component for marine diesel engines. The article presents the results of research on the concentration of exhaust gas components of a Sulzer 6AL20/24 diesel engine powered by a mixture of n-butane and diesel oil. The emission intensity were calculated for the tested components: carbon monoxide, carbon dioxide and nitrogen oxides. The emission intensity surface graphs were created based on the calculated data. The tests were carried out using different concentrations of the mixture of n-butanol and marine fuel.
Źródło:
Combustion Engines; 2021, 60, 4; 90--95
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multiresolution analysis of vibration signals acquired from locomotive Diesel engine for classification of engine states basing on signal statistical parameters
Autorzy:
Boguś, P.
Cieszyński, M.
Merkisz, J.
Powiązania:
https://bibliotekanauki.pl/articles/134120.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
vibration signals
Diesel engine diagnostic
multiresolution analysis
classification
sygnały drganiowe
silnik spalinowy
analiza wielorozdzielcza
klasyfikacja
Opis:
The paper presents a method of classification of locomotive Diesel engine states basing on vibration signals taken from an engine body and using chosen statistical parameters calculated for the original signal and it wavelet multiresolution components. The researches presented in the paper concern estimation of an engine states before and after a general repair. The target application of the presented researches is an on-line diagnostic system which can complement standard OBD systems. To this purpose the applied methods should not base on complex analysis of some spectral, time-frequency or scalogram plots but rather on choosing single diagnostic parameters which are suitable for the fast on-line diagnostic. The results have showed the significant difference in distinguishing of engine work before and after a general repair using some chosen statistical parameters applied to vibration signals.
Źródło:
Combustion Engines; 2017, 56, 1; 68-72
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of vibration signals using short-time analysis and clustering in parameter space for detection of combustion engine state
Autorzy:
Boguś, Piotr
Merkisz, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/134160.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
vibration signals
Diesel engine diagnostic
short-time analysis
clustering
sygnały drganiowe
diagnostyka silników wysokoprężnych
analiza krótkoczasowa
klasteryzacja
Opis:
The paper presents a short-time analysis of the vibration signals for the diagnosis of Diesel engine of combustion locomotive by recognition of different engine states using the clustering technique. The main aim of the researches was to distinguish between different engine states represent different wear extends. The proposed method of vibration signal analysis consists on sliding a time window along signal in time and observing the changes of some given statistical parameters. The set of this parameter values creates a multidimensional parameter space where the time evolution can be observed. For recognition and detection of different engine system states some clustering techniques in the parameter space were performed. The results show the possibility of distinguishing different cluster centers within the parameter space which can be assigning to different engine states represented the states before and after a general repair.
Źródło:
Combustion Engines; 2019, 58, 2; 83-87
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacja procesu testowania wtryskiwaczy paliwa common rail
Optimize the testing process common rail fuel injectors
Autorzy:
Busz, W.
Walaszyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/134203.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diagnostyka
silnik ZS
wtryskiwacz
diagnostics
diesel engine
injector
method of optical
Opis:
W artykule przedstawiono optymalizację metody pozwalającej na testowanie wtryskiwaczy common rail. Standardowe testy wtryskiwacza obejmują kilka punktów pracy. Pomiary te są czasami niewystarczające, ponieważ wtryskiwacze szczególnie po naprawie w pewnych obszarach pracy mogą pracować w nieprawidłowy sposób. Z kolei dokładne testowanie wtryskiwaczy wymaga przeprowadzenia pomiarów dawek paliwa w wielu punktach pracy wtryskiwacza i prowadzi do znacznego wydłużenia czasu testu. Optymalizacja procesu testowania pozwala przy nieznacznym zwiększeniu ilości pomiarów w odniesieniu do standardowych testów i uwzględnieniu zakładanej przez producenta odchyłki od wartości wzorcowej oraz tendencji zmian tej odchyłki na dokładniejszą weryfikację poprawności działania wtryskiwaczy. Pomiary zostały przeprowadzone na Stanowisku Testowania Pomp i Wtryskiwaczy firmy CSM “Autoelektronika Kędzia”.
This paper presents a method to optimize the testing common rail injectors. Standard tests injector includes several operating points. These measurements are sometimes insufficient, since the injectors particularly after repair work in certain areas can be operated in an incorrect manner. The precise adjustment of injectors requires a dose measurements at multiple points fuel injector working and leads to a significant prolongation of the test. Optimize the testing process allows with a slight increase in the number of measurements in relation to the standard tests and taking into account the assumed by the manufacturer of the deviation from the reference value and the deviation trends for accurate verification of the correct operation of the injectors. The measurements were made on the testing bench of pumps and injectors CSM "Autoelektronika Kędzia".
Źródło:
Combustion Engines; 2015, 54, 3; 978-981
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
By-products from thermal processing of rubber waste as fuel for the internal combustion piston engine
Autorzy:
Chwist, Mariusz
Pyrc, Michał
Gruca, Michał
Szwaja, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2097462.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
pyrolysis oil
thermal conversion
biocrude
diesel engine
alternative fuels
olej popirolityczny
konwersja termiczna
silnik diesla
paliwa alternatywne
Opis:
The article presents results of investigation on the combustion of a mixture of pyrolysis oil from tires and regular fuel in the internal combustion reciprocating piston engine. The tested fuel consisted of: diesel fuel and pyrolysis oil at amount of 10% by volume. The tests were carried out on a single-cylinder naturally aspirated compression-ignition engine. The engine was equipped with a common rail fuel injection system and an electronic control unit that allowed changing injection timing. A comparative analysis of pressure-volume charts for the reference fuel, which was diese fuel, and for a mixture of diesel with 10% addition of pyrolysis oil was carried out. Injector characteristics for the reference fuel and the mixture were determined. Engine efficiency for both fuels was also determined. Unrepeatability of the engine work cycles for the diesel fuel and the tested mixture was calculated. Finally, exhaust toxic emission was analyzed. It was found that the pyrolysis oil can be used as valuable additive to regular diesel fuel at amount up to 10%, however, toxic exhaust gases emission was increased.
Źródło:
Combustion Engines; 2020, 59, 2; 11--18
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of non-cooled exhaust gas recirculation on the diesel engine parameters
Autorzy:
Cisek, J.
Powiązania:
https://bibliotekanauki.pl/articles/134037.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gases
EGR
exhaust gas recirculation
silnik spalinowy
spaliny
recyrkulacja spalin
Opis:
This paper presents the results of the diesel engine research on the energy performance, components of exhaust gases and smoke and parameters related to the supply system for VW 1.9 TDI working in 2 modes: with standard, non-cooled EGR system, and without this system. All of measurements were carried out on the some engine speed – 2000 rpm (speed of maximum engine torque) and various engine loads. It was found that the serial engine control unit switches the EGR system off above 150 Nm engine load (Momax = 295 Nm). In this range of load the engine running with EGR is characterized by higher fuel consumption (lower total efficiency) ca. 5%, compared with engine without EGR. Concentration of NOx in exhaust gases was lower up to 45% but, at the same time, exhaust gas smoke and concentration of carbon oxides were strongly increasing. It can be seen that EGR system increases the temperature (up to 110°C) and changes the composition of air-exhaust gas in the intake manifold. One of reason of this fact is self-changing start of injection. Additional effect of EGR is lower air pressure behind turbocharger, because the flow of exhaust gases (into EGR) is taken before the turbine.
Źródło:
Combustion Engines; 2017, 56, 4; 269-273
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of non-cooled exhaust gas recirculation on the indicator diagrams and heat release parameters in diesel engine cylinder
Autorzy:
Cisek, J.
Powiązania:
https://bibliotekanauki.pl/articles/133039.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
exhaust gases
exhaust gas recirculation
EGR
indicator diagrams
rate of heat release
silnik spalinowy
spaliny
recyrkulacja spalin
wykresy indykatorowe
przebieg wywiązywania się ciepła
Opis:
This paper presents the results of the diesel engine research on the indicator and heat realized diagrams for VW 1.9 TDI working in 2 modes: with standard, non-cooled EGR system, and without this system. All of measurement was carried out on the some engine speed – 2000 rpm (speed of maximum engine torque) and various engine load. Some of the analyzed parameters were read directly from the measurement systems (e.g. indicator diagrams) or engine controller (e.g. start of injection) and the rest of them had to be calculated. The calculation of rate of heat release (δQ/dα) was based on the well-known mathematical model. When the exhaust gas recirculation valve is open, the maximum of combustion pressure and rate of maximum kinetic heat release (δQk/dα)max are smaller than when the valve is closed. These facts are connected with the shorter self-combustion delay for engine working with EGR. But this is also associated with reduction of the rate of maximum diffusion heat release (δQd/dα)max, which means that more particulates (PM) are excreted into the atmosphere. This fact explains e.g. significantly higher smog of exhaust gases for diesel engine which works with EGR system. The analysis results show that exhaust gas recirculation system slightly deteriorates the energetic parameters of VW 1.9 TDI engine, but, at the same time, significantly reduces the level of toxic nitrogen oxides in exhaust gases.
Źródło:
Combustion Engines; 2017, 56, 4; 283-288
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies