Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Enhancement" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Experimental investigation and characteristics of multiwalled carbon nanotube aqua nanofluids from a flat plate heater surface in a pool
Autorzy:
Vasudevan, D.
Senthil Kumar, D.
Murugesan, A.
Vijayakumar, C.
Powiązania:
https://bibliotekanauki.pl/articles/201185.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanofluids
critical heat flux
heat transfer coefficient
boiling
heat transfer enhancement
Opis:
In this experimental investigation, the critical heat flux (CHF) of aqua-based multiwalled carbon nanotube (MWCNT) nanofluids at three different volumetric concentrations 0.2%, 0.6%, and 0.8% were prepared, and the test results were compared with deionized water. Different characterization techniques, including X-ray diffraction, scanning electron microscopy and Fourier transform infrared, were used to estimate the size, surface morphology, agglomeration size and chemical nature of MWCNT. The thermal conductivity and viscosity of the MWCNT at three different volumetric concentrations was measured at a different temperature, and results were compared with deionized water. Although, MWCNT-deionized water nanofluid showed superior performance in heat transfer coefficient as compared to the base fluid. However, the results proved that the critical heat flux is increased with an increase in concentrations of nanofluids.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2020, 68, 3; 547-554
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanotechnology for biomedical applications - enhancement of photodynamic activity by nanomaterials
Autorzy:
Ulatowska-Jarża, A.
Pucińska, J.
Wysocka-Król, K.
Hołowacz, I.
Podbielska, H.
Powiązania:
https://bibliotekanauki.pl/articles/200175.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silver-doped nanomaterials
silica-titania (SiO2-TiO2) materials
photodynamic activity
fluorescence enhancement
Opis:
Over the last two decades nanotechnology has become one of the most dynamically evolving field of research. The unique properties of nanomaterials, not disclosing at microscale, are examined and exploited to extend our understanding of the interactions taking place at atomic or molecular level. Those findings affect research in many areas, like e.g. alternative energy sources, electronics, physics and medicine. In this paper, the possibility of using nanomaterials for the enhancement of photodynamic activity, is discussed. A brief review on drug-delivery facilitating nanomaterials, regarding their characteristic features, is presented. An exemplary application of silver-doped nanomaterials for enhancement of photodynamic properties of two photosensitizers: Photolon and Protoporphyrin IX, is described. Influence of silver-doped nanomaterials addition on the fluorescence intensity of photosensitizers immobilized in silica-titania (SiO2-TiO2) sol was examined via VIS spectroscopy. Influence of sonication on the fluorescence enhancement was also investigated. It was demonstrated that the fluorescence enhancement of photosensitizers depends on the concentration of both: photosensitizer and silver-doped nanoparticles.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2011, 59, 3; 253-261
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flow and heat transfer characteristics of a novel airfoil-based tube with dimples
Autorzy:
Pei, Houju
Liu, Meinan
Yang, Kaijie
Zhimao, Li
Liu, Chao
Powiązania:
https://bibliotekanauki.pl/articles/2173696.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer enhancement
airfoil-based tube
dimple
comprehensive performance
wzmocnienie wymiany ciepła
rura
wgłębienie
wykonanie kompleksowe
Opis:
The performance of a novel airfoil-based tube with dimples is numerically studied in the present work. The effect of Reynolds number Re, dimples number N, relative depth H/D, and cross-distribution angle α on flow and heat transfer characteristics are discussed for Re in the range between 7,753 and 21,736. The velocity contour, temperature contour, and local streamlines are also presented to get an insight into the heat transfer enhancement mechanisms. The results show that both the velocity magnitude and flow direction change, and fluid dynamic vortexes are generated around the dimples, which intensify the flow mixing and interrupt the boundary layer, resulting in a better heat transfer performance accompanied by a certain pressure loss compared with the plain tube. The Nusselt number Nu of the airfoil-based tube increases with the increase of dimples number, relative depth, and Reynolds numbers, but the effect of cross-distribution angle can be ignored. Under geometric parameters considered, the airfoil-based tube with N = 6, H/D = 0.1, α = 0° and Re = 7,753 can obtain the largest average PEC value 1.23. Further, the empirical formulas for Nusselt number Nu and friction factor f are fitted in terms of dimple number N, relative depth H/D, and Reynolds number Re, respectively, with the errors within ± 5%. It is found that the airfoil-based tube with dimples has a good comprehensive performance.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 4; art. no. e141984
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of protrusions on the initiation of partial discharges in XLPE high voltage cables
Autorzy:
AlShaikh Saleh, Mohammad
Refaat, Shady S.
Olesz, Marek
Abu-Rub, Haitham
Guziński, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/2090691.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FEA
finite elements analysis
protrusions
XLPE
water trees
partial discharge
void
space charge
stress enhancement factor
analiza elementów skończonych
kable XLPE
polietylen kablowy
polietylen sieciowany
wyładowanie niezupełne
ładunek przestrzenny
Opis:
This paper is focusing on 3D Finite Elements Analysis (FEA) based modelling of protrusions as defects or imperfections in the XLPE high voltage cable. This study is aiming to examine the impact protrusions have on the initiation of partial discharges. Spherical and ellipsoidal protrusions with different sizes at the conductor screen of the high voltage cable is an essential content of this paper. In addition, a spherical gas-filled void is placed inside and outside the protrusions, and a water tree produced from protrusions is under consideration. The partial discharge influence taking place at the protrusions and the stress enhancement factor is determined for all the variations mentioned to quantify the rise in the inception of partial discharges due to the protrusions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; e136037, 1--9
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of protrusions on the initiation of partial discharges in XLPE high voltage cables
Autorzy:
AlShaikh Saleh, Mohammad
Refaat, Shady S.
Olesz, Marek
Abu-Rub, Haitham
Guziński, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/2173562.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FEA
finite elements analysis
protrusions
XLPE
water trees
partial discharge
void
space charge
stress enhancement factor
analiza elementów skończonych
kable XLPE
polietylen kablowy
polietylen sieciowany
wyładowanie niezupełne
ładunek przestrzenny
Opis:
This paper is focusing on 3D Finite Elements Analysis (FEA) based modelling of protrusions as defects or imperfections in the XLPE high voltage cable. This study is aiming to examine the impact protrusions have on the initiation of partial discharges. Spherical and ellipsoidal protrusions with different sizes at the conductor screen of the high voltage cable is an essential content of this paper. In addition, a spherical gas-filled void is placed inside and outside the protrusions, and a water tree produced from protrusions is under consideration. The partial discharge influence taking place at the protrusions and the stress enhancement factor is determined for all the variations mentioned to quantify the rise in the inception of partial discharges due to the protrusions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; art. no. e136037
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies