Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "organic Rankine cycle (ORC)" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Analysis of the use of waste heat from a glass melting furnace for electricity production in the organic Rankine cycle system
Autorzy:
Musiał, Arkadiusz Mateusz
Antczak, Łukasz
Jędrzejewski, Łukasz
Klonowicz, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1845495.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
energy efficiency
distributed generation
organic rankine cycle
ORC
industrial waste heat
Opis:
In most production plants, waste heat is usually discharged into the environment, contributing to a reduction in the energy efficiency of industrial processes. This is often due to the low thermal parameters of the carriers in which this energy is contained, such as oils, water, exhaust gases or other post-process gases, which means that their use for electricity production in a conventional Rankine cycle may prove to be economically unprofitable. One of the technologies enabling the use of lowand medium-temperature waste heat carriers is the organic Rankine cycle (ORC) technology. The paper present results of calculations performed to evaluate potential electricity production in ORC using waste heat from a natural gas-fired glass melting furnace. The analysis was carried out assuming the use of a single-stage axial turbine, whose efficiency was estimated using correlations available in the literature. The calculations were carried out for three working fluids, namely hexamethyldisiloxane, dimethyl carbonate, and toluene for two scenarios, i.e. ORC system dedicated only to electricity production and ORC system working in cogeneration mode, where heat is obtain from cooling the condenser. In each of the considered cases, the ORC system achieves the net power output exceeding 300 kW (309 kW for megawatts in the cogenerative mode to 367 kW for toluene in the non-cogenerative mode), with an estimated turbine efficiency above 80%, in range of 80,75 to 83,78%. The efficiency of the ORC system, depending on the used working fluid and the adopted scenario, is in the range from 14.85 to 16.68%, achieving higher efficiency for the non-cogenerative work scenario.
Źródło:
Archives of Thermodynamics; 2021, 42, 1; 15-33
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of an impulse and a reaction turbine stage for an ORC power plant
Autorzy:
Zaniewski, Dawid
Klimaszewski, Piotr
Witanowski, Łukasz
Jędzejewski, Łukasz
Klonowicz, Piotr
Lampart, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/240056.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CFD
waste heat recovery
steam turbine
organic Rankine cycle
ciepło odpadowe
odzysk ciepła
ORC
organiczny cykl Rankine'a
Opis:
Turbine stages can be divided into two types: impulse stages and reaction stages. The advantages of one type over the second one are generally known based on the basic physics of turbine stage. In this paper these differences between mentioned two types of turbines were indicated on the example of single stage turbines dedicated to work in organic Rankine cycle (ORC) power systems. The turbines for two ORC cases were analysed: the plant generating up to 30 kW and up to 300 kW of net electric power, respectively. Mentioned ORC systems operate with different working fluids: DMC (dimethyl carbonate) for the 30 kW power plant and MM (hexamethyldisiloxane) for the 300 kW power plant. The turbines were compared according to three major issues: thermodynamic and aerodynamic performance, mechanical and manufacturing aspects. The analysis was performed by means of the 0D turbomachinery theory and 3D computational aerodynamic calculations. As a result of this analysis, the paper indicates conclusions which type of turbine is a recommended choice to use in ORC systems taking into account the features of these systems.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 137-157
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A case study of working fluid selection for a small-scale waste heat recovery ORC system
Autorzy:
Klimaszewski, Piotr
Zaniewski, Dawid
Witanowski, Łukasz
Suchocki, Tomasz
Klonowicz, Piotr
Lampart, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/240748.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
waste heat recovery
organic Rankine cycle
ORC fluids
heat exchangers
turboexpander
ciepło odpadowe
odzysk ciepła
ORC
organiczny cykl Rankine'a
wymienniki ciepła
turboekspander
Opis:
The paper illustrates a case study of fluid selection for an internal combustion engine heat recovery organic Rankine cycle (ORC) system having the net power of about 30 kW. Various criteria of fluid selection are discussed. Particular attention is paid to thermodynamic performance of the system and human safety. The selection of working fluid for the ORC system has a large impact on the next steps of the design process, i.e., the working substance affects the turbine design and the size and type of heat exchangers. The final choice is usually a compromise between thermodynamic performance, safety and impact on natural environment. The most important parameters in thermodynamic analysis include calculations of net generated power and ORC cycle efficiency. Some level of toxicity and flammability can be accepted only if the leakages are very low. The fluid thermal stability level has to be taken into account too. The economy is a key aspect from the commercial point of view and that includes not only the fluid cost but also other costs which are the consequence of particular fluid selection. The paper discusses various configurations of the ORC system – with and without a regenerator and with direct or indirect evaporation. The selected working fluids for the considered particular power plant include toluene, DMC (dimethyl carbonate) and MM (hexamethyldisiloxane). Their advantages and disadvantages are outlined.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 159-180
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies