Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "plastic consolidation" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Silver Matrix Composite Reinforced by Aluminium-Silver Intermetallic Phases
Autorzy:
Wloch, G.
Skrzekut, T.
Sobota, J.
Woznicki, A.
Błaż, L.
Powiązania:
https://bibliotekanauki.pl/articles/352667.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silver-aluminum composite
plastic consolidation
powder metallurgy
Ag-Al intermetallics
Opis:
Silver and aluminum powders (82 mass % Ag and 18 mass % Al) were mixed and hot extruded at 673 K with extrusion ratio λ = 25. Performed X-ray diffraction analysis of as extruded rod revealed the development of Ag3Al and Ag2Al-type intermetallic phases. Structural observations and both chemical and diffraction analysis of structural components confirmed the growth of mentioned phases in the vicinity of elementary Al and Ag granules. No pores or voids were observed in the material. Mechanical properties of the composite, UTS = 490MPa, YS = 440 MPa, HV2 = 136, were relatively high if compared to commercial Ag and Cu products. Hot compression tests pointed to the good hot workability of the composite at deformation temperature range 473 K - 773 K. The differential scanning calorimetry tests were performed in order to estimate structural processes during heating of Ag/Al composite that lead to thermodynamically stable liquid state. It was found that characteristic temperature of three endothermic peaks correspond to (1) peritectoid transformation μ-Ag3Al → ζ-Ag2Al + (Ag), (2) the eutectic melting ζ-Ag2Al + (Al) → L, (3) melting of the ζ-Ag2Al phase. The Vickers hardness of the samples annealed at 673 K, for the time range up to 6900 minutes, was also determined. It was concluded that mutual diffusion of elements between Ag and Al granules and the growth of μ-Ag3Al and ζ-Ag2Al grains during annealing at 673 K result in a slight hardening of the composite.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 1; 427-434
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibilities to Obtain Products from 2024 and 7075 Chips in the Process of Consolidation by KoBo Extrusion
Autorzy:
Pawłowska, B.
Śliwa, R. E.
Zwolak, M.
Powiązania:
https://bibliotekanauki.pl/articles/355868.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallic chips
KoBo method
cold plastic consolidation
structural properties of extrudate
mechanical properties of extrudate
Opis:
Basing on experimental data, the possibility of consolidating side products of turning, milling and drilling of aluminum alloys into the form and properties of solids metals using low-temperature KoBo extrusion method has been assessed. Research regarding mechanical and structural properties of the final products revealed their total consolidation and proved their compatibility with requirements for products made of bulk billets. Importantly, the chips consolidation process does not require high or even raised temperature, which significantly reduces the unfavorable phenomenon of chips oxidation and its negative influence on the structure and mechanical properties of products. A very good effect of chips compaction has been proved by KoBo method, which has been confirmed by relatively slightly different mechanical properties of the material after recycling compared with the bulk one. Among currently applied techniques of consolidation of dispersed fractions in a solid state (leaving the melting stage out), the KoBo method seems an innovative way of utilizing metallic chips, as it enables a cold deformation process.The paper presents investigations using 2024 and 7075 aluminum alloys chips from manufacturing process, formed into briquettes and deformed under conditions of KoBo extrusion process, which enables to obtain long product by cold forming. The final product characterized by good microstructures, mechanical features and low cost of production.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1213-1221
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Producing Ultrafine Grain Structure in AZ91 Magnesium Alloy Cast by Rapid Solidification
Wytwarzanie materiału o ultradrobnoziarnistej strukturze ze stopu magnezu AZ91 odlewanego w procesie rapid solidification
Autorzy:
Szymanek, M.
Augustyn, B.
Kapinos, D.
Boczkal, S.
Nowak, J.
Powiązania:
https://bibliotekanauki.pl/articles/353516.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
rapid solidification
plastic consolidation
hot extrusion
extrusion die profile
stopy magnezu
szybkie krzepnięcie
konsolidacja plastyczna
wytłaczanie na gorąco
Opis:
The paper presents the technological aspect of the process of casting, crushing and plastic consolidation of semi-finished products from magnesium alloy. The aim of this study was to produce by the rapid solidification process a magnesium alloy from the MgAl9Zn1 family in the form of ribbons with ultrafine grain structure. The material cast in the melt spinning device was next crushed and subjected to the operation of cold consolidation and hot extrusion. The paper presents different stages of the process, including initial characterisation of the obtained material.
W artykule przedstawiono aspekt technologiczny procesu odlewania, rozdrabniania i konsolidacji plastycznej otrzymywa- nych półwyrobów ze stopu magnezu. Celem pracy było wytworzenie metodą szybkiej krystalizacji stopu magnezu z układu MgAlOZn1, o ultradrobnoziarnistej strukturze w postaci taśmy. Materiał odlany na stanowisku melt spinning w kolejnym etapie został rozdrobniony i poddany procesowi konsolidacji na zimno i wyciskaniu na gorąco. W artykule zostały przedstawione poszczególne etapy procesu wraz z wstępną charakteryzacją otrzymywanego materiału.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 1; 317-321
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies