Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "gas corrosion" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Anticorrosion Properties and Morphology of Phosphate Coating Formed on Nitrided Surface of 42CrMo4 Steel
Autorzy:
Kapuścińska, A.
Kwiatkowski, L.
Wach, P.
Mazurek, A.
Diduszko, R.
Powiązania:
https://bibliotekanauki.pl/articles/356565.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
corrosion resistance
phosphating
gas nitriding
γ' nitrides
ε nitrides
Opis:
The subject of the study concerns the enhancement of corrosion and wear resistance of nitrided 42CrMo4 steel by the formation of zinc phosphate top layer. The present work is aimed at the assessment of the effect of increasing thickness of nitrided layer from approximately 2 μm to 16 μm on the morphology and properties of zinc phosphate coating. XRD analysis showed that along with the increase in the thickness of the nitrides layer, a change in the phase composition was observed. SEM/EDS examination revealed that top layer consists of crystalline zinc phosphate coating. The shape and size of crystals does not significantly depend on a thickness of nitrides layer but corrosion resistance determined by potentiodynamic method in 0.5M NaCl increased with an increase of thickness of a “white layer”. Similarily the wear resistance determined by the 3-cone-roll test was also the highest for 16 μm nitride layer.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 471-477
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Welding and Corrosion Behavior of AISI H13 Welds: The Effect of Filler Metal on the Microstructural Evolutions
Autorzy:
Varmaziar, Sadegh
Mostaan, Hossein
Rafiei, Mahdi
Yeganeh, Mahdi
Powiązania:
https://bibliotekanauki.pl/articles/2049365.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AISI H13 tool steel
gas tungsten arc welding
filler metal
corrosion
microstructure
Opis:
Welding of AISI H13 tool steel which is mainly used in mold making is difficult due to the some alloying elements and it high hardenability. The effect filler metal composition on the microstructural changes, phase evolutions, and hardness during gas tungsten arc welding of AISI H13 hot work tool steel was investigated. Corrosion resistance of each weld was studied. For this purpose, four filler metals i.e. ER 312, ER NiCrMo-3, ER 80S, and 18Ni maraging steel were supplied. Potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) were used to study the corrosion behavior of weldments. It was found the ER 80S weld showed the highest hardness owing to fully martensitic microstructure. The hardness in ER 312 and ER NiCrMo3 weld metals was noticeably lower than that of the other weld metals in which the microstructures mainly consisted of austenite phase. The results showed that the corrosion rate of ER 312 weld metal was lower than that other weld metals which is due to the high chromium content in this weld metal. The corrosion rate of ER NiCrMo-3 was lower than that of 18Ni maraging weld. The obtained results from EIS tests confirm the findings of potentiodynamic polarization tests.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 839-846
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Application of Deep Cryogenic Treatment to Improve the Properties of Nitrided Layers Formed on X153CrMoV12 Steel
Autorzy:
Wach, P.
Ciski, A.
Babul, T.
Kapuścińska, A.
Oleszak, D.
Powiązania:
https://bibliotekanauki.pl/articles/355130.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas nitriding
nitride layers
cryogenic treatment
heat treatment
tribology
corrosion resistance
X153CrMoV12 steel
Opis:
Deep cryogenic treatment (DCT) is gaining popularity as a treatment used to modify structures obtained during heat or thermo-chemical treatment. The article presents the influence of DCT, carried out during heat treatment before and after gas nitriding processes, on the formation of gas nitrided layers on X153CrMoV12 steel. It was found that the use of DCT between quenching and tempering performed prior to gas nitriding processes, increases the hardness, thickness and wear resistance of the nitrided layers. At the same time, if we apply cryogenic treatment during post-heat treatment of nitrided layers, we also get very high wear resistance and increased thickness of nitrided layers, in comparison with conventional gas nitriding of X153CrMoV12 steel. In this case, DCT significantly increases also the hardness of the core by the transformation of retained austenite and the precipitation of fine carbides of alloying elements.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 303-309
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies