- Tytuł:
-
Sintered Fe-Ni-Cu-Sn-C Alloys Made of Ball-Milled Powders
Spiekane materiały Fe-Ni-Cu-Sn-C otrzymane z mielonych proszków - Autorzy:
-
Romański, A.
Tokarski, T.
Tyrała, D. - Powiązania:
- https://bibliotekanauki.pl/articles/351866.pdf
- Data publikacji:
- 2014
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
sintered diamond tools
sintering
microstructure
matrix
spiekanie
matryca
mikrostruktura - Opis:
-
The main objective of this paper was to perform sinterability studies of ball-milled Fe-12%Ni-6.4%Cu-1.6%Sn-0.6%C powders. A mixture of precisely weighed amounts of elemental iron, nickel and graphite, and pre-alloyed 80/20 bronze powders was ball-milled for 8, 30 and 120 hours. After cold-pressing at 400 MPa the specimens were sintered at 900°C for 30 minutes in a reducing atmosphere and subsequently tested for density and hardness as well as subjected to structural studies using scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The obtained results showed that only the powder ball-milled for 120 hours yielded a near pore-free material after consolidation by cold pressing and pressureless sintering at 900°C. Assuch, it could have a potential to be used in production of diamond-impregnated wire saw beads.
Głównym celem pracy było zbadanie przydatności mielonych proszków w młynie kulowym do wytwarzania spiekanych materiałów Fe-12%Ni-6.4%Cu-1.6%Sn-0.6%C. Mieszankę elementarnych proszków żelaza, niklu oraz grafitu wraz z proszkiem brązu B20 poddano mieleniu w młynie kulowym przez okres 8, 30 i 120 godzin. Prasowane pod ciśnieniem 400 MPa wypraski wykonane z mielonych proszków poddano spiekaniu w temperaturze 900°C przez 30 minut w atmosferze redukującej. Spieki zostały poddane badaniom gęstości, twardości oraz mikrostrukturalnym, obejmującym mikroskopię skaningową oraz rentgenowską analizę fazową. Otrzymane wyniki badań wskazują, że tylko spieki wykonane z proszku mielonego przez 120 godzin odznaczają się niską porowatością i z tego powodu mogą stanowić potencjalny materiał osnowy spiekanych segmentów metaliczno-diamentowych przeznaczonych do produkcji pił linowych. - Źródło:
-
Archives of Metallurgy and Materials; 2014, 59, 3; 947-950
1733-3490 - Pojawia się w:
- Archives of Metallurgy and Materials
- Dostawca treści:
- Biblioteka Nauki