Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Rahman, A." wg kryterium: Wszystkie pola


Wyświetlanie 1-3 z 3
Tytuł:
Development of High Entropy Alloy as Catalyst for Azo Dye Degradation in Fenton Process
Autorzy:
Hassan, Nur Hudawiyah Abu
Nasir, Nisa Syukrina Mat
Rahman, S. N. A.
Irfan, Abd Rahim
Nordin, Norhuda Hidayah
Powiązania:
https://bibliotekanauki.pl/articles/2203739.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
azo dye
catalyst
fenton process
high entropy alloys
HEAs
Opis:
Azo dye is widely used in the textile industry since it is cost effective and simple to use. However, it becomes a continuous source of environmental pollution due to its carcinogenicity and toxicity. Various methods had been used to remove the azo dye in solution. One of the famous and frequently used is the Fenton process. The Fenton process is one of the advanced oxidation processes where iron catalysed hydrogen peroxide to generate hydroxyl radical. Treating azo dyes in solution requires a catalyst to enhance the process of degradation. Herein, high entropy alloys (HEAs) have been proposed as a catalytic material to enhance the performance of Fenton process for azo dye degradation. HEAs have been reported as a promising catalyst due to its high surface area. The higher the number of active sites, the higher the rate of azo dye degradation as more active sites are available for adsorption of azo dyes. The results have shown that HEAs can be used as a catalyst to fasten the Fenton reaction since the degradation time is proven to be shorter in the presence of HEAs. The method derived from the result of this study will contribute in treating azo dyes for wastewater management in the Fenton process.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 209--213
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structured Analysis of Nanostructured Zinc Oxide (ZnO) Thin Films Deposited by Sol-Gel
Autorzy:
Hussin, Rosniza
Hanafi, F.
Rashid, R. A.
Harun, Z.
Kamdi, Z.
Ibrahim, S. A.
Ainuddin, A. R.
Rahman, W.
Leman, A. M.
Powiązania:
https://bibliotekanauki.pl/articles/2134100.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sol-gel
zinc oxide
ZnO
thin films
nanostructured
Opis:
In this work, zinc oxide (ZnO) thin films are deposited on glass substrate using the sol-gel spin coating technique. The effect of annealing temperature on structural properties was investigated. The ZnO sol-gel was produced from zinc acetate dehydrate as the starting material with iso-propanol alcohol as the stabilizer. The ratio was controlled, distilled water and diethanolamine as the solvent mixing on a magnetic stirrer for an hour under constant heat of 60°C. The ZnO thin film was deposited using the spin coating technique with the speed of 3000 rpm for 30 minutes before the sample undergoes pre-heat in the oven at the temperature of 100°C for 10 minutes. The sample was annealing in the furnace for an hour at 200°C, 350°C, and 500°C. The X-ray diffraction (XRD) analysis confirms that hexagonal wurtzite structure with zincite and zinc acetate hydroxide hydrate composition. The thin films surface roughness was analyzed using an atomic force microscope (AFM) and scanning electron microscope (SEM) for surface morphology observation.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 3; 1055--1060
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Cadmium using Alkaline-Treated Activated Carbon from Leucaena Leucocephala Biomass
Autorzy:
Ibrahim, W. M. H. W.
Sulaiman, Nurul Syuhada
Amini, Mohd Hazim Mohammad
Kadir, W. R. A.
Mohamed, Mazlan
Ramle, Sitti Fatimah Mhd
Bilgin, Ugur
Rahman, Wan
Powiązania:
https://bibliotekanauki.pl/articles/2125550.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activated carbon
cadmium
Leucaena leucocephala
adsorption
Opis:
Water contamination that caused by heavy metals is a very common phenomenon in the industrial age. One of the popular way to treat metal contaminated water is by adsorption process using activated carbon as the adsorbent. This paper works on producing activated carbon by chemical means with impregnation ratios of NaOH:char (w/w) was predetermined at 1:1 (ACT1-1), 2:1 (ACT2-1) and 3:1 (ACT3-1) under activation temperature of 700°C. Considering the Leucaena leucocephala is a wildly, easy and fast grown species, with the availability throught the year, it was chosen to be used as the precursor. The properties of these activated carbons and its potential for cadmium removal from aqueus solution was analyzed. It was found that the highest surface area was recorded at 662.76 m²/g. Four parameters were studied which are contact time, the effect of pH, initial concentration of adsorbate and temperature. The equilibrium time was achieved in 40 min treatment at initial concentrations of 30 mg/l. The adsorbent exhibited good sorption potential for cadmium at pH 8.0 and equilibrium temperature of 30℃. Based on the results, this study had proved that activated carbon from Leucaena leucocephala biomass have the good potential to be used for removal of cadmium from wastewater.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 3; 1033--1036
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies