Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "flow channel" wg kryterium: Wszystkie pola


Wyświetlanie 1-15 z 15
Tytuł:
Shear Stress Statistics in a Compound Channel Flow
Autorzy:
Czernuszenko, W.
Rowiński, P. M.
Powiązania:
https://bibliotekanauki.pl/articles/241044.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channels
turbulence
measurements
Reynolds stresses
coherent structures
Opis:
The results of comprehensive measurements of three-dimensional turbulent velocities carried out in a laboratory compound channel are presented. Tests were performed in a two-stage channel with a smooth main channel bed consisting of concrete and rough floodplains and sloping banks. Instantaneous velocities were measured with the use of a three-component acoustic Doppler velocimeter. The main aim of the study is the recognition of structure of Reynolds stresses in turbulent open channel flows. Particular attention has been paid to bursting events such as ejections and sweeps. The bursting phenomenon occurs originally near the buffer layer and then shows a coherent or organized flow structure during its convection process. The probability density distributions of the turbulent velocities were measured at different distances from the bed in the main channel and also above the inclined walls. In the main channel, the lateral turbulent velocity is seen to follow the normal Gaussian distribution more closely than the remaining two components. Above the inclined walls, all distributions turned out to have greater skewness. The probability density distributions of correlations between velocity fluctuations were also calculated. These distributions have long tails and sharp peaks and fit the theoretical distributions very well. The structure of instantaneous Reynolds stresses was analyzed by a quadrant technique with an arbitrarily chosen threshold level. It has been shown that the largest contribution to turbulent stresses comes from the second quadrant (ejection) and the fourth quadrant (sweep). The basic temporal characteristics for quadrant events, like the average and maximum time for a zero hole size, have been determined in the study. Calculations of maximum duration times for all events reveal that times are greater for even quadrants than for odd quadrants.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2008, 55, 1-2; 3-27
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lagrangian Model for a Single Saltating Grain in the Near-Wall Region of an Open-Channel Flow
Autorzy:
Czernuszenko, W.
Powiązania:
https://bibliotekanauki.pl/articles/241181.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
Lagrangian model
open-channel flow
particle-particle interaction
Opis:
A mathematical model for the continuous saltation of a particle near the granular bed in an open-channel flow is developed in detail. The model is based on the Lagrangian equations governing particle motion, and it takes into account the following forces: drag, lift, gravitation, virtual mass and the force responsible for particle-particle interactions. A model of particle-particle collisions is developed and used to determine the mean impulsive force acting upon a particle flowing and rebounding from the channel bed. The model can simulate the continuous saltation trajectories of a single particle in the near-bed region of turbulent flows, in which particle motion is controlled by collisions. The model has been calibrated and verified with available published data in a rather wide range of grain sizes from 0.53 mm to 15 mm. All parameters, such as lift, drag, restitution, friction coefficients and roughness height, have been set on the basis of a reanalysis of these published data.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2013, 60, 1-4; 31-50
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Modelling of Fish Passage with Turning Pools
Autorzy:
Maniecki, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/241474.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel flow
fishway
turbulence
numerical model
turning pool
Opis:
An assessment of operating conditions in a baffled fish passage with pool dimensions of 2:2 3:0 m, and 180 horizontally turning pools, was carried out using numerical computations and a site survey of water flow velocity distribution. Velocity was measured with a PMS electromagnetic flowmeter and a hydrometric current meter in representative cross-sections of the fish passage in the pool centres and in the baffle barrier cross-section area. Numerical computations were also performed for two alternative baffle locations in the fishway. One reflected the actual conditions, and the other was an alternative arrangement designed to improve hydraulic conditions for fish migration. The numerical model used the Large Eddy Simulation (LES) method, which makes it possible to detect large vortexes. The study pays close attention to the velocity field analysis as well as the distribution and sizes of vortexes in the turning pool of the culvert. The results of numerical computations and the site survey show high consistency, and the proposed baffle placement modification significantly improves flow conditions, especially in the entry section of the passage.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2018, 65, 1; 41-66
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lax-Wendroff and McCormack Schemes for Numerical Simulation of Unsteady Gradually and Rapidly Varied Open Channel Flow
Autorzy:
Machalińska-Murawska, J.
Szydłowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/973864.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel flow
mathematical modeling
numerical simulation
FDM schemes
Opis:
Two explicit schemes of the finite difference method are presented and analyzed in the paper. The applicability of the Lax-Wendroff and McCormack schemes for modeling unsteady rapidly and gradually varied open channel flow is investigated. For simulation of the transcritical flow the original and improved McCormack scheme is used. The schemes are used for numerical solution of one dimensional Saint-Venant equations describing free surface water flow. Two numerical simulations of flow with different hydraulic characteristics were performed – the first one for the extreme flow of the dam-break type and the second one for the simplified flood wave propagation problem. The computational results are compared to each other and to arbitrary solutions.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2013, 60, 1-4; 51-62
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Analysis of Relations Between Coherent Turbulent Structures and Formation of Bedforms
Autorzy:
Termini, D.
Sammartano, V.
Powiązania:
https://bibliotekanauki.pl/articles/241077.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel flow
sediment transport
bed forms
flow turbulence structure
Opis:
The present paper describes an experimental investigation on the interactions between flow turbulence and sediment motion. During the experiments, detailed measurements of flow velocity components were carried out using an Acoustic Doppler Velocimeter (ADV). The occurrence of turbulent events (inward interaction, ejection, sweep and burst) was verified through conditioned quadrant analysis. The quantitative information on the spatial and temporal evolution of turbulent events was obtained through space-time correlations of the conditioned data. As the primary objective was to analyse how turbulent structures influence formation of bedforms, the spatial scale of turbulent event evolution has been compared with the wavelength of bed-forms (alternate bars) observed on the bed. The analysis has essentially highlighted that such spatial scale compares well with the wavelength of the bars.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2008, 55, 3-4; 125-143
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydraulic Loss Coefficients in 1D Flows
Autorzy:
Sawicki, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/241418.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
hydraulic loss
closed-conduits flows
water hammer
open channel flow
Opis:
Determination of hydraulic losses is a very important problem, both from the cognitive and practical points of view. For the uniform and steady fluid streams these losses are described by the well known algebraic expressions, containing some experimental coefficients. In technical practice it is commonly assumed, that these coefficients can be applied also for more complex kinds of flow (non-uniform and even unsteady). However, the problem analysis shows that the proper level of conformity between the results of calculations and measurements can be obtained only after a considerable enlargement of the loss coefficient. Investigation of available characteristics of non-uniform and unsteady 1D velocity fields, presented in this article, leads to the conclusion that this enlargement is physically justified and in some cases it is possible to determine correction factors, which enable recalculation of "basic" coefficients into their new values, suitable for more complex models of 1D flows.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2007, 54, 2; 95-116
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Analysis of Horizontal Turbulence of Flow over Flat and Deformed Beds
Autorzy:
Termini, D.
Powiązania:
https://bibliotekanauki.pl/articles/241285.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open-channel flow
flow turbulence structure
burst cycle
bed forms
laboratory experiments
Opis:
Laboratory experiments in a straight flume were carried out to examine the evolution of large-scale horizontal turbulent structures under flat-bed and deformed-bed conditions. In this paper, the horizontal turbulence of flow under these conditions is analyzed and compared. The conditioned quadrant method is applied to verify the occurrence of turbulent events. The distributions of horizontal Reynolds shear stress and turbulent kinetic energy are also presented and discussed. Results show the occurrence of an “initial” sequence of horizontal vortices whose average spatial length scales with the channel width. Under deformed-bed conditions, this spatial length does not change.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2015, 62, 3-4; 77-99
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A turbulence model for 3-d flows with anisotropic structure of turbulence
Autorzy:
Czernuszenko, W.
Rylov, A.
Powiązania:
https://bibliotekanauki.pl/articles/241364.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
3D flow
mathematical model
numerical simulation
open channel flow
turbulence model
Opis:
A new turbulence model for flows in open channels with compound cross-sections is presented. The structure of turbulence in these channels can be anisotropic. This structure is described by the turbulent stress tensor that is presented here as the sum of two tensors, namely, normal and shear stress tensors. The normal and shear turbulent stresses are expressed by the turbulence intensities and the mixing length tensor (MLT), respectively. The turbulence intensities can be learned from measurements or another suitable approaches. One such approach that allows calculating the main component of the normal stresses is presented in the paper. The components of MLT are defined based on a new concept of generic mixing length (GML). The generic mixing length is assumed to depend on both distances; from the nearest wall and from the water surface. To demonstrate how the new model works the basic hydrodynamic equations (parabolic approximation of Reynolds equations) together with the turbulence model are solved. The well-known Patankar and Spalding (1972) algorithm was used when solving these equations. A series of numerical simulations were performed for different components of MLT and different channel geometries.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2005, 52, 4; 303-320
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two-dimensional vertical Reynolds-Averaged Navier-Stokes equations versus one-dimensional Saint-Venant model for rapidly varied open channel water flow modelling
Autorzy:
Szydłowski, M.
Zima, P.
Powiązania:
https://bibliotekanauki.pl/articles/241158.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
mathematical modelling
Reynolds-averaged Navier-Stokes equations
Saint-Venant equations
free surface flow
rapidly varied flow
dam-break problem
Opis:
The paper concerns mathematical modelling of free surface open channel water flow. In order to simulate the flow two models are used -- two-dimensional vertical Reynolds-Averaged Navier-Stokes equations and one-dimensional Saint-Venant equations. The former is solved with SIPMLE algorithm of finite difference method using Marker and Cell technique to trace a free surface movement. The latter is solved using the finite volume method. The dam-break (water column collapse) problem on horizontal bottom is investigated as a test case. The calculated results are compared with each other. The numerical simulations are examined against laboratory experiment presented by Koshizuka et al (1995). The possibility of using the described models to simulate rapidly varied flow is discussed.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2006, 53, 4; 295-309
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flow in a skewed compound open channel with trees on a flood plain
Autorzy:
Fukui, Y.
Urayama, T.
Takamizu, K.
Powiązania:
https://bibliotekanauki.pl/articles/241408.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
skewed compound open channel
trees on the flood plain
drag force
secondary flow
Opis:
In this research, the flow in a skewed compound channel with trees on the flood plain along the skewed part is studied. Three cases are assumed. Namely, 1) there are no trees on the flood plain along the main skewed part; 2) there are many trees on the flood plain set in order; and 3) there are many trees on the flood plain in disorder. In this research, 1) changes of water level and velocity in the channel; 2) the de-velopment of secondary flow as water flows downward; 3) the drag force due to the existence of trees; and 4) the changes of the river bed level in a movable bed condition are investigated. Numerical analyses using 2-D shallow water theory are also carried out to reproduce a flow in the skewed channel. As a result, the hydraulic quantities, for example water depth and the velocity cal-culated for a case setting trees in order and close together, are available in the river planning for a situation in which some of the trees were washed downstream. Such hydraulic quantities become severe for conditions in order and close to-gether in the flood. During the experiment using sand, channel beds are deformed by piling up and digging of sands or stones in various cases.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2003, 50, 1; 3-19
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Analysis of Turbulent Flow over a Backward-facing Step in an Open Channel
Autorzy:
Saleem, Bala Kawa M.
Mustafa, Andam
Kareem, Dalshad Ahmed
Yuce, Mehmet Ishak
Szydłowski, Micchał
Al-Ansari, Nadhir
Powiązania:
https://bibliotekanauki.pl/articles/31340451.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel
backward-facing step
reattachment length
expansion ratio
Kɛ- model
Kω- model
Opis:
Computational examinations of the flow field in an open channel having a single Backward- -Facing Step (BFS) with a constant water depth of 1.5 m were performed. The effects of the expansion ratio, and the flow velocity along the reattachment length, were investigated by employing two different expansion ratios of 1.5 and 2, and eight various flow velocities of 0.5, 1, 2, 3, 4, 5, 7.5 and 10 m/sec in the Computational Fluid Dynamic (CFD) simulations. Commercially available CFD software, ANSYS FLUENT, was used for calculations. The simulation outcomes were verified using experimental results. Moreover, analyses were performed by using two equation turbulence closure models, K-ε family (standard, RNG and realizable), and K-ω family (Wilcox’s and SST K-ω). The analyses have revealed that the reattachment length increases with an increase in the expansion ratio, the flow velocity and the Reynolds number. The results obtained for two expansion rates and eight different flow velocities have shown insignificant differences between one turbulence closure model and the others. Furthermore, it was observed that both velocity and expansion ratios have an effect on the reattachment zone size.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2023, 70, 1; 49-69
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Average Energy Slope Estimation Formulas for One-dimensional Steady Gradually Varied Flow
Autorzy:
Artichowicz, W.
Mikos-Studnicka, P.
Powiązania:
https://bibliotekanauki.pl/articles/241083.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
open channel
steady flow
gradually varied flow
standard step method
energy slope
Opis:
To find the steady flow water surface profile, it is possible to use Bernoulli’s equation, which is a discrete form of the differential energy equation. Such an approach requires the average energy slope between cross-sections to be estimated. In the literature, many methods are proposed for estimating the average energy slope in this case, such as the arithmetic mean, resulting in the standard step method, the harmonic mean and the geometric mean. Also hydraulic averaging by means of conveyance is commonly used. In this study, water surface profiles numerically computed using different formulas for expressing the average slope were compared with exact analytical solutions of the differential energy equation. Maximum relative and mean square errors between numerical and analytical solutions were used as measures of the quality of numerical models. Experiments showed that all methods gave solutions useful for practical engineering purposes. For every method, the numerical solution was very close to the analytical one. However, from the numerical viewpoint, the differences between the methods were significant, as the errors differed up to two orders of magnitude.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2014, 61, 3-4; 89--109
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stream Division by a Channel Bottom Orifice
Autorzy:
Sawicki, J. M.
Siebert, M.
Powiązania:
https://bibliotekanauki.pl/articles/241250.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
flow regulator
overfall
storm sewer
Opis:
A particularly important application of devices dividing a stream of liquid is in storm water drainage systems. Dividers of rainwater sewage streams have in recent years aroused considerable interest among producers of separators. It is therefore important to develop mathematically simple and, if possible, physically precise methods of sizing such structures. It is all the more important given that there are few such methods in the literature on hydraulics. This work is meant to partially remedy this deficiency by elaborating on the calculation methodology and by verifying it empirically. A circular orifice at the bottom of the supplying channel is technically the simplest type of stream divider (which makes it higly practical and particularly appealing to producers). A procedure for dimensioning the structure under consideration is proposed here. It is formally simple, being meant as a practical designing tool. This proposal has been verified experimentally. The degree of the division of the stream was measured in a laboratory model. The main issues were the stability of the characteristics of the lateral outflow and the possibility of applying the classical equations of hydraulics to size the type of divider considered here. In both cases the results obtained may be regarded as positive. Admittedly, the output of the lateral outflow exceeds the nominal value for greater inflows Qp, but it is at most double the nominal value. From a technical point of view, this may be regarded as a good result, considering the simplicity of the system. The answer to the second issue proved even more satisfactory. It turns out that the formally simple hydraulics relationships provide a technically consistency of theory with measurement results. Thus the designing of objective devices does not require the application of difficult, time-consuming and costly methodology.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2012, 59, 3-4; 155-163
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of a streamwise turbulent flow field in an open two-stage channel
Autorzy:
Rowiński, P. M.
Czernuszenko, W.
Kozioł, A. P.
Kubrak, J.
Powiązania:
https://bibliotekanauki.pl/articles/241402.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Opis:
The results of the experimental studies, aimed at the recognition of the streamwise turbulent structure in a compound channel, are reported in this paper. Three sets of measurements with electromagnetic liquid velocity meter were used: one in a smooth channel, one with the rough overbank channels and the last one with the modelled high vegetation occurring on floodplains. The analyses included vertical distributions of local mean velocities, depth-averaged mean velocities, bed shear stresses, turbulent intensities, higher order velocity moments, autocorrelation and velocity spectra. Relevant turbulent temporal and spatial scales were evaluated. All the properties were investigated with special emphasis placed on the influence of roughness on them.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2002, 49, 2; 37-57
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Energy Slope Averaging Methods on Numerical Solution of 1D Steady Gradually Varied Flow
Autorzy:
Artichowicz, W.
Prybytak, D.
Powiązania:
https://bibliotekanauki.pl/articles/240952.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
standard step method
numerical integration
initial-value problem
ordinary differential equation
open channel
steady gradually varied flow
energy slope
Opis:
In this paper, energy slope averaging in the one-dimensional steady gradually varied flow model is considered. For this purpose, different methods of averaging the energy slope between cross-sections are used. The most popular are arithmetic, geometric, harmonic and hydraulic means. However, from the formal viewpoint, the application of different averaging formulas results in different numerical integration formulas. This study examines the basic properties of numerical methods resulting from different types of averaging.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2015, 62, 3-4; 101-119
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-15 z 15

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies