Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "non-destructive" wg kryterium: Temat


Wyświetlanie 1-9 z 9
Tytuł:
The “Metallurgists Hoard”. Silver and Lead Smelting in the Early Medieval Poland
Autorzy:
Garbacz-Klempka, A.
Rozmus, D.
Powiązania:
https://bibliotekanauki.pl/articles/382578.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
archaeometallurgy
silver
lead
X-ray fluorescence
cupellation
badania nieniszczące
srebro
ołów
XRF
Opis:
During archaeological research of early medieval settlement in Dąbrowa Górnicza - Łosień, a hoard of silver coins and silver smelts was discovered, over 1000 items in total. There was also found a mining shaft and numerous furnaces in the settlement area, confirming its mining and metallurgical character. The settlement development was based on excavating and smelting rich lead ores, containing significant amount of silver. Silver was separated from lead in successive stages with the help of cupellation. The paper presents the analyses of silver smelts and coins coming from the hoard. Optical and scanning microscopy were applied as well as the methods of chemical content analysis by X-Ray Fluorescence (XRF), Scanning Electron Microscopy and Energy Dispersive Spectroscopy in microareas (SEM-EDS), and also phase analysis with the help of X-Ray Diffraction method (XRD). The impurities of the silver clumps testify to the fact that they are semi-products. After refining and modifying the material by adding copper, denars were minted from it. The silver coins belonging the hoard are made from relatively pure material, including a small lead. An insignificant amount of other metallic elements testifies to the good quality of the raw material and efficiency of silver production in the early Middle Ages.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 17-20
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Methods for Determining the Ferrite Content in Duplex Cast Steels
Autorzy:
Kaňa, V.
Pernica, V.
Zadera, A.
Krutiš, V.
Powiązania:
https://bibliotekanauki.pl/articles/382804.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
duplex cast steel
metallographic evaluation
XRD
ferritoscope
badania nieniszczące
staliwo
metalografia
ferryt
zawartość ferrytu
Opis:
The paper is concerned with comparing the methods for determining the ferrite content in castings from duplex stainless steels. It uses Schaeffler diagram, empirical formula based calculation, image analysis of metallographic sample, X-ray diffraction and measurement with a feritscope. The influence of wall thickness of the casting on the ferrite content was tested too. The results of the experiments show that the casting thickness of 25 or 60 mm does not have a significant effect on the measured amount of ferrite. The image analysis of metallographic sample and the measurement with the feritscope appear to be the most suitable methods. On the contrary, predictive methods, such as Schaeffler diagram or empirical formula based calculation are only indicative and cannot replace the real measurements. X-ray diffraction seems to be the least suitable measuring method. Values of ferrite content measured in such a way often deviated from the values measured by image analysis and with feritscope.
Źródło:
Archives of Foundry Engineering; 2019, 2; 85-90
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Archaeometallurgical Investigations of the Early Iron Age Casting Workshop at Kamieniec. A Preliminary Study
Autorzy:
Garbacz-Klempka, A.
Kowalski, Ł.
Kozana, J.
Gackowski, J.
Perek-Nowak, M.
Szczepańska, G.
Piękoś, M.
Powiązania:
https://bibliotekanauki.pl/articles/383062.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
investment casting
X-ray fluorescence spectroscopy
archaeometallurgy
Lusatian culture
badania nieniszczące
odlewnictwo
promieniowanie rentgenowskie
kultura łużycka
Opis:
(Chełmno land, Poland) as it is reflected through casting workshop recovered during recent excavations. Among ready products, the ones giving evidence of local metallurgy (e.g. casting moulds and main runners) were also identified. With the shrinkage cavities and dendritic microstructures revealed, the artifacts prove the implementing a casting method by the Lusatian culture metalworkers. The elemental composition indicates application of two main types of bronzes: Cu-Sn and Cu-Pb. Aside these main alloying additions, some natural impurities such as silver, arsenic, antimony and nickel were found which may be attributed to the origin of the ore and casting technology. The collection from Kamieniec was described in terms of its structure and composition. The investigations were made by means of the energy dispersive X-ray fluorescence spectroscopy (ED-XRF), scanning electron microscopy (SEM) coupled with an energy dispersive X-ray analysis system (EDS) and optical microscopy (OM). In order to fingerprint either local or non-local profile of the alloys, the ED-XRF data-set was statistically evaluated using a factor analysis (FA).
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 29-34
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of a Castings Quality and Metalworking Technology. Treasure of the Bronze Age Axes
Autorzy:
Garbacz-Klempka, A.
Kaczmarek, Ł.
Kwak, Z.
Kozana, J.
Piękoś, M.
Perek-Nowak, M.
Długosz, P.
Powiązania:
https://bibliotekanauki.pl/articles/382751.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
archeometallurgy
tin bronze
X-ray spectroscopy
castings defects
badania nieniszczące
archeometalurgia
brąz
spektroskopia rentgenowska
wady odlewów
Opis:
Cast axes are one of the most numerous categories of bronze products from earlier phases of the Bronze Age found in Poland. They had multiple applications since they were not only used objects such as tools or weapons but also played the prestigious and cult roles. Investigations of the selected axes from the bronze products treasure of the Bronze Age, found in the territory of Poland, are presented in the hereby paper. The holder of these findings is the State Archaeological Museum in Warsaw. Metallurgical investigations of axes with bushing were performed in respect of the casting technology and quality of obtained castings. Macroscopic observations allowed to document the remains of the gating system and to assess the range and kind of casting defects. Light microscopy revealed the microstructure character of these relicts. The chemical composition was determined by means of the X-ray fluorescence method with energy dispersion (ED-XRF) and by the scanning electron microscopy with X-ray energy dispersion analysis in micro-areas (SEM-EDS). The shape and dimensions of cores, reproducing inner parts of axes were identified on the basis of the X-ray tomography images. Studies reconstructed production technology of the mould with gating system, determined chemical composition of the applied alloys and casting structures as well as revealed the casting defects being the result of construction and usage of moulds and cores.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 179-285
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Visual Testing of Castings Defects after Vibratory Machining
Autorzy:
Bańkowski, D.
Młynarczyk, P.
Powiązania:
https://bibliotekanauki.pl/articles/1840920.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
visual testing
vibratory machining
surface treatment
castings
badania nieniszczące
testy wizualne
obróbka wibracyjna
obróbka powierzchniowa
odlewy
Opis:
The paper presents an example of the application of vibratory machining for castings based on the results of visual testing. The purpose of the work is to popularize non-destructive testing and vibratory machining as finishing process, especially in the case of cast objects. Visual testing is one of the obligatory non-destructive tests used for castings and welded joints. The basic requirements concerning the dimensional accuracy and surface texture of cast components are not met if visible surface flaws are detected. The tested castings, which had characteristic traces of the casting process, were subjected to vibratory machining. The machining with loose abrasive media in vibrating containers is aimed at smoothing the surface and reducing or completely removing flashes. To complement the visual testing were also conducted research on the contact profilometer Taylor Hobson PGI 1200. Particular attention was focused on measuring the height of flashes and changes in the surface of smoothed details based on BNIF No. 359 touch-visual patterns. Based on the work, it can be concluded that vibratory machining allows for removal flashes and smoothing of the surface of aluminum alloy cast objects.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 72-76
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasonic Inspection Techniques Possibilities for Centrifugal Cast Copper Alloy
Autorzy:
Konar, R.
Mician, M.
Powiązania:
https://bibliotekanauki.pl/articles/380860.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
centrifugal cast
ultrasonic attenuation
copper alloy
brass microstructure
badania nieniszczące
odlewy odśrodkowe
tłumienie ultradźwiękowe
stop miedzi
mikrostruktura mosiądzu
Opis:
The article deals with ultrasonic testing possibilities of the copper alloy centrifugal casts. It focused on the problems that arise when testing of castings is made of non-ferrous materials. Most common types of casting defects is dedicated in theoretical introduction of article. Ultrasonic testing technique by conventional ultrasound system is described in the theoretical part too. Practical ultrasonic testing of centrifugal copper alloy cast - brass is in experimental part. The experimental sample was part of centrifugally cast brass ring with dimensions of Ø1200x34 mm. The influence of microstructure on ultrasonic attenuation and limitations in testing due to attenuation is describes in experimental part. Conventional direct single element contact ultrasound probe with frequencies of 5 MHz, 3.5 MHz and 2 MHz were used for all experimental measurements. The results of experimental part of article are recommendations for selecting equipment and accessories for casting testing made of non-ferrous metals.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 35-38
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ceramic Moulds for Precision Casting in the Bronze Age and Computer Reconstruction of the Casts
Autorzy:
Garbacz-Klempka, A.
Kozana, J.
Piekoś, M.
Kwak, Z.
Długosz, P.
Stolarczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/382197.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
archaeometallurgy
casting mould
lost wax molding
reconstruction
XRF
computer visualization
badania nieniszczące
formy odlewnicze
metoda traconego wosku
wizualizacja komputerowa
Opis:
The casting workshop in Grzybiany, in Lower Silesia (SW Poland) is a valuable source of knowledge on the development of casting techniques in the 7 – 6 centuries BC. Abundant evidence found on the archaeological site points to cast manufacturing by means of precision casting in ceramic moulds (lost-wax molding). The workshop is the biggest collection of moulds for bracelet, necklace and other smaller decorative artefacts in Poland. The aim of the work is to conduct the research of the moulds and casts with the view of performing a computer reconstruction of the casting moulds from the Bronze and Early Iron Age, based on the Grzybiany finds. As part of the work, both the microscopic structure and defectoscopic analyses of the casting moulds were performed. Chemical composition of the casts was tested using the X-ray fluorescence spectroscopy method. Based on these results and using computer modelling methods, a geometric visualisation was performed, which is the bases for preparing the visualisation of the process of pouring liquid metal into the moulds, reconstructing both the technology and the alloys used.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 21-26
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bronze Jewellery from the Early Iron Age urn-field in Mała Kępa. An approach to casting technology
Autorzy:
Garbacz-Klempka, A.
Kowalski, Ł.
Gackowski, J.
Perek-Nowak, M.
Powiązania:
https://bibliotekanauki.pl/articles/379760.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bronze jewellery
non-destructive testing
investment casting
X-ray fluorescence spectroscopy
archaeometallurgy
Lusatian culture
biżuteria z brązu
badania nieniszczące
odlewnictwo
spektroskopia rentgenowska
archeometalurgia
kultura łużycka
Opis:
This study characterizes the bronze jewellery recovered from the Lusatian culture urn-field in Mała Kępa (Chełmno land, Poland). Among many common ornaments (e.g. necklaces, rings, pins) the ones giving evidence of a steppe-styled inspiration (nail earrings) were also identified. With the dendritic microstructures revealed, the nail earrings prove the implementing of a lost-wax casting method, whereas some of the castings were further subjected to metalworking. The elemental composition indicates the application of two main types of bronze alloys: Cu-Sn and Cu-Sn-Pb. It has been established that the Lusatian metalworkers were familiar with re-melting the scrap bronze and made themselves capable of roasting the sulphide-rich ores. The collection from Mała Kępa has been described in terms of its structure and composition. The investigations were made by means of the energy dispersive X-ray fluorescence spectroscopy (ED-XRF), scanning electron microscopy (SEM) coupled with an energy dispersive X - ray analysis system (EDS) and optical microscopy (OM). In order to fingerprint an alloy profile of the castings with a special emphasis on the nail earrings, the data-set (ED-XRF, EDS) was statistically evaluated using multidimensional analyses (FA, DA).
Źródło:
Archives of Foundry Engineering; 2017, 17, 3; 175-183
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Analysis of Foundry Engineering of Copper Alloys Based on the Research of a Metallurgist Settlement in Szczepidło
Autorzy:
Garbacz-Klempka, A.
Makarowicz, P.
Tokarski, T.
Powiązania:
https://bibliotekanauki.pl/articles/382112.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
non-destructive testing
archaeometallurgy
bronze age workshop
investment casting
copper alloys
X-ray fluorescence spectroscopy
badania nieniszczące
archeometria
epoka brązu
odlewy
stopy miedzi
spektroskopia rentgenowska
Opis:
The article presents chosen aspects of foundry engineering of the settlement dwellers, including the archaeometric characteristics and metal science analysis of the artefacts, as well as an attempted reconstruction of the production organization. Discovered in Szczepidło (Greater Poland), the foundry workshop is unique in Central European Bronze Age. This workshop foundry operated roughly XIV-XII Century BC. Its production is evidenced by the presence of markers of the whole production cycle: semi-finished and finished products, production waste, fragments of crucibles and casting ladles with traces of usage, and tools. On this basis the alloys and foundry technologies used have been described. The analysis of foundry technology of copper alloys in the settlement area was carried out by observing the surface and structure of the products, semi-finished artefacts and fragments of crucibles by applying optical microscopy (OM), confocal microscopy (CLSM) and X-ray radiography (RT). The investigations of compositions were made by means of the energy dispersive X-ray fluorescence spectroscopy (ED-XRF) and scanning electron microscopy (SEM) coupled with an energy dispersive X-ray analysis system (EDS).
Źródło:
Archives of Foundry Engineering; 2017, 17, 1; 45-50
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies