Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "annealing" wg kryterium: Temat


Wyświetlanie 1-8 z 8
Tytuł:
Analysis of the High Chromium Cast Iron Microstructure after the Heat Treatment
Autorzy:
Kopyciński, D.
Guzik, E.
Siekaniec, D.
Szczęsny, A.
Powiązania:
https://bibliotekanauki.pl/articles/382103.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high chromium cast iron
heat treatment
hardening
tempering
soft annealing
żeliwo wysokochromowe
obróbka cieplna
hartowanie
wyżarzanie
Opis:
The article presents results of heat treatment on the high chromium cast iron. The study was carrying out on samples cut from the casting made from chromium cast iron. Those were hardened at different temperatures, then tempered and soft annealed. The heat treatment was performed in a laboratory chamber furnace in the Department of Engineering Alloys and Composites at Faculty of Foundry Engineering AGH. At each stage of the heat treatment the hardness was measured by Vickers and Rockwell methods, and the microscope images were done. Additionally based on images from the optical microscope the microstructure was assessed. Based on these results, the effect of hardening, tempering and soft annealing on the microstructure and hardness of high chromium cast iron was studied. Next the effects of different hardening temperatures on the properties of high chromium cast iron were compared. The study led to systemize the literature data of the parameters of heat treatment of high chromium cast iron, and optimal conditions for heat treatment was proposed for casts of similar properties and parameters.
Źródło:
Archives of Foundry Engineering; 2014, 14, 3; 43-46
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Lamellar Graphite Cast Iron Annealing on Hardness and Structure
Autorzy:
Roučka, J.
Prochazka, J.
Kana, V.
Krutis, V.
Nedelova, K.
Powiązania:
https://bibliotekanauki.pl/articles/380964.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
welding
annealing
cast iron hardness
structure stability
żeliwo
spawanie
wyżarzanie
twardość żeliwa
struktura
stabilność
Opis:
An analysis has been carried out of the influence of annealing time at the preheating temperature of 650 °C on the change in hardness and alloy structure of lamellar graphite cast iron in the working as well as in the laboratory conditions. This preheat temperature is common during reclaiming welding of castings with complex shapes. The changes in unalloyed cast iron EN-GJL 200 to EN-GJL 300 according to ISO 1690 standard and cast iron with low amount of elements such as Sn, Cu, Cr, and Mo and their combinations were assessed. It was found that the cast iron of higher strength grades has better hardness and structural stability. Cast iron alloyed with chromium or its combinations has the highest stability. In unalloyed cast iron, a partial degradation of pearlite occurs; in alloyed cast iron the structural changes are not conclusive.
Źródło:
Archives of Foundry Engineering; 2019, 4; 105-112
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Soft Annealing Treatment on Impact Strength and Hardness of the EN AC-AlSi11 Alloy
Autorzy:
Jarko, A.
Powiązania:
https://bibliotekanauki.pl/articles/380988.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat treatment
aluminium alloys
alpax alloy
silumins
soft annealing
obróbka cieplna
stopy aluminium
stop alpax
siluminy
wygrzewanie
Opis:
The paper presents research on the effects of soft annealing parameters on a change of the impact strength KC and Brinell hardness (HB) of the EN AC-AlSi11 alloy. The research has been performed according to the trivalent testing plan for two input parameters – temperature in the range between 280°C and 370°C and time in the range between 2 and 8 hours. The application of such heat treatment improves the plasticity of the investigated alloy. The improvement of the impact strength KC by 71% and the decrease of the hardness HB by 20% was achieved for the soft annealing treatment conducted at a temperature 370°C for 8 hours, compared to the alloy without the heat treatment. A change of the form of eutectic silicon precipitations which underwent refinement, coagulation and partial rounding, had a direct effect on the hardness HB and impact strength KC. The results obtained were used to prepare space plots enabling the temperature and time for soft annealing treatment to be selected with reference to the obtained impact strength KC and hardness HB of the alloy with the heat treatment.
Źródło:
Archives of Foundry Engineering; 2017, 17, 3; 55-58
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Long-term Annealing of NiCrAlY LENS Coating on 316L Steel
Autorzy:
Szymański, Krzysztof K.
Powiązania:
https://bibliotekanauki.pl/articles/2203942.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
NiCrAlY
LENS
Laser Engineered Net Shaping
additive manufacturing
long-term annealing
microstructural stability
produkcja dodatkowa
długotrwałe wyżarzanie
stabilność mikrostrukturalna
Opis:
This article presents the results of a research on the behavior of NiCrAlY coating obtained by the LENS method on austenitic stainless steel type 316L under long-term annealing conditions at 1000°C for 25, 100 and 250 hours. The morphology of the NiCrAlY layer as a function of annealing time and temperature was characterized. The chemical composition and distribution of alloying elements were evaluated using scanning microscopy and micro-area chemical composition analysis. It was revealed that NiCrAlY coatings deposited by LENS method are characterized by good metallurgical quality. The long-term annealing of the NiCrAlY coating led to microstructural changes in the form of the disappearance of the original dendritic structure and the formation of a solid solution of nickel with chromium and a small amount of aluminum, as well as chromium α-Cr precipitates and Ni-Y-type phases. The effect of increasing iron concentration in the coating due to diffusion-to-core processes was also found.
Źródło:
Archives of Foundry Engineering; 2022, 22, 4; 116--120
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Temperature on Ausferritic Nodular Cast Iron Microstructure
Autorzy:
Gumienny, G.
Klimek, L.
Powiązania:
https://bibliotekanauki.pl/articles/379556.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting materials
innovative casting technologies
nodular cast iron
ausferrite
annealing
innowacyjne materiały odlewnicze
innowacyjne technologie
żeliwo sferoidalne
wyżarzanie
Opis:
The work presents the results of the studies of the effect of the temperature on the microstructure of ausferritic nodular cast iron. The ausferrite in the matrix was obtained by way of a specific combination of molybdenum and copper. The cast iron underwent annealing at the temperatures of 520, 550 and 580°C. The work presents the effect of the annealing temperature on the fraction of austenite in the cast iron matrix. The annealed and non-annealed cast iron hardness is given. The work also proves that an increase in the temperature up to 580°C causes a drop in the cast iron hardness.
Źródło:
Archives of Foundry Engineering; 2014, 14, 3 spec.; 21-24
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Crystal Segregation During Casting of the Alloy AlZn5.5Mg2.5Cu1.5
Autorzy:
Weiss, V.
Svobodova, J.
Cais, J.
Powiązania:
https://bibliotekanauki.pl/articles/382136.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
theory of crystallization
heat treatment
homogenizing annealing
crystal segregation
alloy Al-Zn-Mg-Cu
krystalizacja
obróbka cieplna
wyżarzanie
stop Al-Zn-Mg-Cu
Opis:
In the course of homogenizing annealing of aluminium alloys being cast continually or semi-continually it appears that chemical inhomogenity takes off within separate dendritic cells (crystal segregation). It is about a diffusion process that takes place at the temperature which approaches the liquid temperature of the material. In that process the transition of soluble intermetallic compounds and eutectic to solid solution occurs and it suppresses crystal segregation significantly [1]. The temperature, homogenization time, the size of dendritic cells and diffusion length influences homogenizing process. The article explores the optimization of homogenizing process in terms of its time and homogenizing annealing temperature which influence mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 63-68
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the Annealing Temperature on the Microstructure and Properties of Ausferritic Nodular Cast Iron
Autorzy:
Gumienny, G.
Klimek, L.
Kurowska, B.
Powiązania:
https://bibliotekanauki.pl/articles/383050.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative casting materials
innovative casting technologies
ausferritic cast iron
nodular cast iron
impact strength
annealing
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
żeliwo ausferrytyczne
żeliwo sferoidalne
siła uderzenia
wyżarzanie
Opis:
The paper presents the microstructure and selected properties of ausferritic nodular cast iron annealed at the temperature 520 and 550°C. This choice was dictated by the temperatures used in the practice of nitriding. Nodular graphite in cast iron was obtained with use of Inmold process. Cast iron containing molybdenum and copper ensuring obtaining an ausferrite in the cast iron matrix without the use of heat treatment of castings was tested. The effect of annealing temperature on the microstructure and the kind of fracture of the ausferritic nodular cast iron was presented. The effect of an annealing temperature on hardness, impact strength and the microhardness of ausferritic nodular cast iron matrix was shown too. The lamellar structure of phases in the cast iron matrix after annealing has been ascertained. There has been an increase in hardness of an annealed cast iron and microhardness of its matrix. The reduction in the impact strength of the cast iron annealed at 520 and 550°C was approximately 10-30%. Both an increase in the hardness of cast iron as well as an decrease in its impact strength is probably due to the separation of secondary carbides during the heat treatment.
Źródło:
Archives of Foundry Engineering; 2016, 16, 3; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of annealing time for quenching CuAl7Fe5Ni5W2Si2 bronze on the microstructure and mechanical properties
Autorzy:
Pisarek, B. P.
Powiązania:
https://bibliotekanauki.pl/articles/382884.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
wyżarzanie
hartowanie
właściwości mechaniczne
brąz Al-Fe-Ni-W-Si
innovative foundry technologies
innovative foundry material
annealing
quenching
microstructure
mechanical properties
Al-Fe-Ni-W-Si bronze
Opis:
This paper presents the influence of annealing time 30, 60 and 120 min at 1000 C for quenching CuAl7Fe5Ni5W2Si2 bronze in 10% water solution of NaCl, on the microstructure and mechanical properties. The presented results concern the species newly developed aluminum-iron-nickel bronze, with additions W and Si. In order to determine changes in the microstructure of the hardened bronze metallographic studies were performed on cylindrical samples of diameter 10 mm, on the metallographic microscope with digital image analysis, X-ray phase analysis, EDX point with the digital recording on the computer. Specified percentage of the microstructure of martensite and bainite, participation of proeutectoid \alfa phase in the microstructure, grain size of former \beta phase, the amount of dissolved \kappa phase. It was found that in the microstructure of bronze in the cast state, there are a number of intermetallic phases of \kappa type. At interphase boundaries of primary intermetallic faceted precipitates, especially rich in tungsten (IM_W), nucleate and grow dendritic primary intermetallic [...] phases, with chemical composition similar to the type of Fe3Si iron silicide. Dissolved, during the heating, in the \beta phase are all the intermediate phase included in the microstructure, with the exception of primary intermetallic phases of tungsten and [...]. Prolongation of the isothermal annealing causes coagulation and coalescence of primary phases. In microstructure of the bronze after quenching obtained the \alfa phase precipitation on the grain boundary of secondary \beta phase, coarse bainite and martensite, for all annealing times. With the change of annealing time are changed the relative proportions of individual phases or their systems, in the microstructure. In the microstructure of bronze, hold at temperature of 1000 C for 60 min, after quenching martensitic microstructure was obtained with the primary phases, and the least amount of bainite.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2; 187-204
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies