Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Abrasive wear" wg kryterium: Temat


Tytuł:
The Abrasive Wear Resistance of Chromium Cast Iron
Autorzy:
Kopyciński, D.
Piasny, S.
Kawalec, M.
Madizhanova, A.
Powiązania:
https://bibliotekanauki.pl/articles/381907.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
abrasive wear resistance
white cast iron
carbides
odporność na ścieranie
żeliwo białe
węgliki
Opis:
The resistance of cast iron to abrasive wear depends on the metal abrasive hardness ratio. For example, hardness of the structural constituents of the cast iron metal matrix is lower than the hardness of ordinary silica sand. Also cementite, the basic component of unalloyed white cast iron, has hardness lower than the hardness of silica. Some resistance to the abrasive effect of the aforementioned silica sand can provide the chromium white cast iron containing in its structure a large amount of (Cr, Fe)7C3 carbides characterised by hardness higher than the hardness of the silica sand in question. In the present study, it has been anticipated that the white cast iron structure will be changed by changing the type of metal matrix and the type of carbides present in this matrix, which will greatly expand the application area of castings under the harsh operating conditions of abrasive wear. Moreover, the study compares the results of abrasive wear resistance tests performed on the examined types of cast iron. Tests of abrasive wear resistance were carried out on a Miller machine. Samples of standard dimensions were exposed to abrasion in a double to-and-fro movement, sliding against the bottom of a trough filled with an aqueous abrasive mixture containing SiC + distilled water. The obtained results of changes in the sample weight were approximated with a power curve and shown further in the study.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1; 63-66
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tribological Wear of as Cast Zn-4Al Alloy Cooled at Various Rates from the Eutectoid Transformation Temperature
Autorzy:
Lachowicz, M. M.
Leśniewski, T.
Lachowicz, M. B.
Jasionowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/1837868.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
microstructure
heat treatment
abrasive wear
Zinc alloys
Zn-4Al
metalografia
mikrostruktura
obróbka cieplna
zużycie ścierne
stopy cynku
Opis:
The paper presents the results from a study on the impact of the cooling rate in the eutectoid transition on the abrasive wear of the as cast Zn-4Al alloy. The microstructure of the researched material consists of dendrites of the η solid solution and an (α+η) eutectic structure. During the eutectoid transformation at 275oC the distribution in the eutectic structure was transformed and fined. Heat treatment was carried out for this alloy, during which three cooling mediums were used, i.e. water, air and an furnace. For the research material obtained in this way, metallographic examinations were performed using the methods of light and scanning electron microscopy, as well as hardness measurements. It was found that faster cooling rate promoted the fragmentation of structural components, which translates into higher hardness of the material. This also had effects in the tribological wear of the tested alloy. As part of the tests, an abrasive wear test was carried out on a standard T-07 tester.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 108-114
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Graphite Addition on the Abrasive Wear of AlMg10 Alloy Matrix Composites Reinforced with SiC Particles
Autorzy:
Łągiewka, M.
Konopka, Z.
Powiązania:
https://bibliotekanauki.pl/articles/382261.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composites
abrasive wear
hard SiC particles
hardness of composite materials
kompozyty
zużycie ścierne
twarde cząstki SiC
twardość materiałów kompozytowych
Opis:
The presented work deals with the influence of the addition of soft graphite particles on the abrasive wear of composite reinforced with hard SiC particles. The discussed hybrid composites were produced by stirring the liquid alloy and simultaneous adding the mixture of particles. The adequately prepared suspension was gravity cast into a metal die. Both the composite castings obtained in this way and the comparative castings produced of the pure matrix alloy were examined for the abrasive wear behaviour. Photomacrographs of the sliding surfaces of the examined composites were taken, and also the hardness measurements were carried out. It was found that even a small addition of Cgr particles influences positively the tribological properties of the examined composite materials, protecting the abraded surface from the destructive action of silicon carbide particles. The work presents also the results of hardness measurements which confirm that the composite material hardness increases with an increase in the volume fraction of hard reinforcing particles.
Źródło:
Archives of Foundry Engineering; 2014, 14, 3; 51-54
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction and Wear Properties of Plasma Sprayed YSZ/Ni-Cr-Al Coated 6063-T6 Aluminum Alloy
Autorzy:
Erzi, E.
Dispinar, D.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/383089.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloy
mechanical properties
abrasive wear
plasma spraying
YSZ coating
stop aluminium
właściwości mechaniczne
zużycie ścierne
natryskiwanie
powłoka YSZ
Opis:
In this study T6 heat treated 6063 aluminum alloys were used as substrate material. In order to form a bond between the substrate and the main coating, all samples were coated with Ni-Cr-Al powders. 8 wt% Yttria Stabilized Zirconia powders (YSZ) were coated with plasma spray technique. Thickness of YSZ was 150 m and bond coating was 36 m. XRD and SEM-EDS analyses were performed to characterize the coating layers. These YSZ coated and uncoated samples were subjected to wear testing under different spindle speed, loading and working distance. Wear test results were compared with the kinetic friction coefficients and weight loss values. Wear marks on YSZ coated and uncoated samples were investigated by SEM analysis. By coating with plasma spray technique, the wear resistance of Al alloys was increased without changing the friction coefficient. It was found that spindle speed had significant effect over the wear properties than the load applied. By YSZ coating, wear properties were increased 10 times.
Źródło:
Archives of Foundry Engineering; 2017, 17, 3; 168-174
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microsegregation of Elements in Steel Composite Reinforced with Ceramic
Autorzy:
Medyński, D.
Janus, A. J.
Powiązania:
https://bibliotekanauki.pl/articles/1837773.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite materials
cast reinforced
cast steel
ceramic materials
abrasive wear
materiały kompozytowe
staliwo zbrojone
staliwo
materiały ceramiczne
zużycie ścierne
Opis:
The paper presents results of research on steel castings GX120Mn13 (L120G13 by PN-89/H-83160), zone-reinforced by elektrocorundum particles (Al2O3), with a grain size from 2 to 3.5 mm. Studies revealed continuity at interface between composite components and formation of a diffusion zone in the surface layer of electrocorundum grains. In the area of this zone, simple manganese segregation and reverse iron and chromium segregation were found. The transfer of these elements from cast steel to electrocorundum grains resulted superficial depletion in aluminum and oxygen in this area. No porosity was observed at the interface between two components of the composite. We found it very beneficial from an exploitation point of view, as confirmed by the study of resistance to abrasive wear.
Źródło:
Archives of Foundry Engineering; 2021, 21, 1; 63-66
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microsegregation of Elements in Steel Composite Reinforced with Ceramic
Autorzy:
Medyński, D.
Janus, A. J.
Powiązania:
https://bibliotekanauki.pl/articles/1837854.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite materials
cast reinforced
cast steel
ceramic materials
abrasive wear
materiały kompozytowe
staliwo zbrojone
staliwo
materiały ceramiczne
zużycie ścierne
Opis:
The paper presents results of research on steel castings GX120Mn13 (L120G13 by PN-89/H-83160), zone-reinforced by elektrocorundum particles (Al2O3), with a grain size from 2 to 3.5 mm. Studies revealed continuity at interface between composite components and formation of a diffusion zone in the surface layer of electrocorundum grains. In the area of this zone, simple manganese segregation and reverse iron and chromium segregation were found. The transfer of these elements from cast steel to electrocorundum grains resulted superficial depletion in aluminum and oxygen in this area. No porosity was observed at the interface between two components of the composite. We found it very beneficial from an exploitation point of view, as confirmed by the study of resistance to abrasive wear.
Źródło:
Archives of Foundry Engineering; 2021, 21, 1; 63-66
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cast High-Manganese Steel – the Effect of Microstructure on Abrasive Wear Behaviour in Miller Test
Autorzy:
Kalandyk, B.
Tęcza, G.
Zapała, R.
Sobula, S.
Powiązania:
https://bibliotekanauki.pl/articles/383241.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
austenite
high-manganese steel
microstructure
abrasive wear resistance
Miller slurry machine test
austenit
stal wysokomanganowa
mikrostruktura
odporność na ścieranie
test Millera
Opis:
The results of the modification of austenitic matrix in cast high-manganese steel containing 11÷19% Mn with additions of Cr, Ni and Ti were discussed. The introduction of carbide-forming alloying elements to this cast steel leads to the formation in matrix of stable complex carbide phases, which effectively increase the abrasive wear resistance in a mixture of SiC and water. The starting material used in tests was a cast Hadfield steel containing 11% Mn and 1.34% C. The results presented in the article show significant improvement in abrasive wear resistance and hardness owing to the structure modification with additions of Cr and Ti.
Źródło:
Archives of Foundry Engineering; 2015, 15, 2; 35-38
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Resistance to Abrasive Wear and Volume Fraction of Carbides in Cast High-manganese Austenitic Steel with Composite Structure
Autorzy:
Tęcza, G.
Głownia, J.
Powiązania:
https://bibliotekanauki.pl/articles/381502.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
resistance to abrasive wear
high-manganese steel
solution treatment
microstructure
vanadium carbide
odporność na zużycie ścierne
stal wysokomanganowa
mikrostruktura
węglik wanadu
Opis:
Cast Hadfield steel is characterised by high abrasion resistance, provided, however, that it is exposed to the effect of dynamic loads. During abrasion without loading, e.g. under the impact of loose sand jet, its wear resistance drops very drastically. To increase the abrasion resistance of this alloy under the conditions where no pressure is acting, primary vanadium carbides are formed in the metallurgical process, to obtain a composite structure after the melt solidification. The primary, very hard, carbides uniformly distributed in the austenitic matrix are reported to double the wear resistance of samples subjected to the effect of a silicon carbide-water mixture.
Źródło:
Archives of Foundry Engineering; 2015, 15, 4; 129-133
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Abrasive-wear Resistance of Austenitic Cast Iron
Autorzy:
Medyński, D.
Janus, A.
Powiązania:
https://bibliotekanauki.pl/articles/380382.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
abrasive wear
austenitic cast iron
heat treatment
nickel equivalent
transformation of austenite
zużycie ścierne
żeliwo austenityczne
obróbka cieplna
nikiel
transformacja austenitu
Opis:
A research of wear resistance of an austenitic cast iron with higher resistance to abrasive-wear and maintained corrosion resistance characteristic for Ni-Resist cast iron is presented. For the examination, structure of raw castings was first formed by proper selection of chemical composition (to make machining possible). Next, a heat treatment was applied (annealing at 550 °C for 4 hours followed by air cooling) in order to increase abrasive-wear resistance. One of the factors deciding intensity of wear appeared to be the chilling degree of castings. However, with respect to unfavourable influence of chilling on machining properties, an important factor increasing abrasive-wear resistance is transformation of austenite to acicular ferrite as a result of annealing non-chilled castings. Heat treatment of non-chilled austenitic cast iron (EquNi > 16%) resulted in much higher abrasive-wear resistance in comparison to the alloy having pearlitic matrix at ambient temperature (EquNi 5.4÷6.8%).
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coefficient of Friction of a Brake Disc-Brake Pad Friction Couple
Autorzy:
Orłowicz, A. W.
Mróz, M.
Wnuk, G.
Markowska, O.
Homik, W.
Kolbusz, B,
Powiązania:
https://bibliotekanauki.pl/articles/380628.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
flake graphite
cast iron
brake discs
abrasive wear resistance
friction coefficient
grafit płatkowy
żeliwo
tarcza hamulcowa
odporność na ścierania
współczynnik tarcia
Opis:
The paper concerns evaluation of the coefficient of friction characterising a friction couple comprising a commercial brake disc cast of flake graphite grey iron and a typical brake pad for passenger motor car. For the applied interaction conditions, the brake pressure of 0.53 MPa and the linear velocity measured on the pad-disc trace axis equalling 15 km/h, evolution of the friction coefficient μ values were observed. It turned out that after a period of 50 minutes, temperature reached the value 270°C and got stabilised. After this time interval, the friction coefficient value also got stabilised on the level of μ = 0.38. In case of a block in its original state, stabilisation of the friction coefficient value occurred after a stage in the course of which a continuous growth of its value was observed up to the level μ = 0.41 and then a decrease to the value μ = 0.38. It can be assumed that occurrence of this stage was an effect of an initial running-in of the friction couple. In consecutive abrasion tests on the same friction couple, the friction coefficient value stabilisation occurred after the stage of a steady increase of its value. It can be stated that the stage corresponded to a secondary running-in of the friction couple. The observed stages lasted for similar periods of time and ended with reaching the stabile level of temperature of the disc-pad contact surface.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 196-200
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of high-manganese cast steel strain hardening on the abrasion wear resistance in a mixture of SiC and water
Autorzy:
Kalandyk, B.
Zapała, R.
Powiązania:
https://bibliotekanauki.pl/articles/382258.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
austenite
high-manganese steel
microstructure
abrasive wear resistance
Miller slurry machine test
austenit
stal wysokomanganowa
mikrostruktura
odporność na zużycie ścierne
test Millera
Opis:
The study attempts to determine the impact of the high-manganese cast steel strain hardening on its abrasion wear resistance in a mixture of SiC and water prepared in accordance with ASTM G75. For tests, the high-manganese cast steel containing 10.7, 17.9 and 20.02% Mn was selected. The results of microstructure examinations and abrasion wear resistance tests carried out on the material in non-hardened condition and after strain hardening with a force of 539.55kN were disclosed. Additionally, the surface of samples after a 16-hour cycle of abrasion tests was examined. Moreover, based on the obtained results, the effect of different contents of Mn in cast steel was studied, mainly in terms of its impact on the abrasion wear resistance. The results obtained on the tested materials were compared with the results obtained on the low-alloyed abrasion wear-resistant cast steel L35GSM.
Źródło:
Archives of Foundry Engineering; 2013, 13, 4; 63-66
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Grey Cast Iron Locally Reinforced Using 3D Printing Scaffold Insert
Autorzy:
Przyszlak, N.
Dulska, A.
Wróbel, T.
Szajnar, J.
Powiązania:
https://bibliotekanauki.pl/articles/380636.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
grey cast iron
3D printing insert
Titanium
hardness
abrasive wear
żeliwo szare
wkład do druku 3D
tytan
twardość
zużycie ścierne
Opis:
The paper presents an innovative method of creating the layered castings. The innovation relies on application the 3D printing insert obtaining in SLM (selective laser melting) method. This type of scaffold insert made from pure Ti powder, was placed into mould cavity directly before pouring by grey cast iron. In result of used method was obtained grey cast iron casting with surface layer reinforced by titanium carbides. In range of studies were carried out metallographic researches using light microscope and scanning electron microscope, microhardness measurements and abrasive wear resistance. On the basis of obtaining results was stated that there is a possibility of reinforcing surface layer of the grey cast iron casting by using 3D printing scaffold insert in the method of mould cavity preparation. Moreover there was a local increase in hardness and abrasive wear resistance in spite of the precipitation of titanium carbides in surface layer of grey cast iron. While the usable properties of composite surface layer obtained in result of use of the method presented in the paper, strongly depend of dimensions of scaffold insert, mainly parameters Re and Ri.
Źródło:
Archives of Foundry Engineering; 2018, 18, 1; 99-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Abrasive wear resistance of cast iron with precipitates of spheroidal VC carbides
Autorzy:
Kawalec, M.
Olejnik, E.
Powiązania:
https://bibliotekanauki.pl/articles/382894.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odporność na zużycie ścierne
żeliwo wysokowanadowe
stop eutektyczny
sferoidyzacja
węglik wanadu
abrasive wear resistance
high-vanadium cast iron
eutectic alloy
spheroidization
vanadium carbide
Opis:
The paper presents the results of abrasive wear resistance tests carried out on high-vanadium cast iron with spheroidal VC carbides. The cast iron of eutectic composition was subjected to spheroidising treatment using magnesium master alloy. The tribological properties were examined for the base cast iron (W), for the cast iron subjected to spheroidising treatment (S) and for the abrasion-resistant steel (SH). Studies have shown that high-vanadium cast iron with both eutectic carbides and spheroidal carbides has the abrasion resistance twice as high as the abrasion-resistant cast steel. The spheroidisation of VC carbides did not change the abrasion resistance compared to the base high-vanadium grade.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2; 221-226
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wear resistance of nodular cast iron with carbides
Autorzy:
Gumienny, G.
Powiązania:
https://bibliotekanauki.pl/articles/381470.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry material
nodular cast iron
carbides
abrasive wear resistance
adhesive wear resistance
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
żeliwo sferoidalne
węgliki
odporność na ścieranie
Opis:
In this paper results of abrasive and adhesive wear resistance of selected grades of nodular cast iron with carbides are presented. It was demonstrated, that the maximum wear resistance has got nodular cast iron with the microstructure of upper bainite, lower bainite and carbides. This cast iron with hardened steel and sulfonitrided steel is the most advantageous friction pair during adhesive wear testing. It was found, that the least advantageous friction pair is pearlitic nodular cast iron with carbides and normalized steel.
Źródło:
Archives of Foundry Engineering; 2011, 11, 3 spec.; 81-88
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Abrasive Wear of Alloyed Cast Steels Applied for Heavy Machinery
Autorzy:
Studnicki, A.
Kondracki, M.
Suchoń, J.
Szajnar, J.
Bartocha, D.
Wróbel, T.
Powiązania:
https://bibliotekanauki.pl/articles/380173.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
low alloyed cast steel
chromium cast steel
abrasive wear
pin on disc method
staliwo niskostopowe
staliwo chromowe
zużycie ścierne
metoda "pin on disc"
Opis:
In the paper the results and analysis of abrasive wear studies were shown for two grades of cast steels: low-alloyed cast steel applied for heavy machinery parts such as housing, covers etc. and chromium cast steels applied for kinetic nodes of pin-sleeve type. Studies were performed using the modified in Department of Foundry pin-on-disc method.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 99-104
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies