Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "surface strength" wg kryterium: Wszystkie pola


Wyświetlanie 1-9 z 9
Tytuł:
Response Surface Analysis of the Compressive Strength of Self-Compacting Concrete Incorporating Metakaolin
Autorzy:
Busari, Ayobami
Dahunsi, Bamidel
Akinmusuru, Joseph
Loto, Tolulope
Ajayi, Samuel
Powiązania:
https://bibliotekanauki.pl/articles/102799.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
response surface analysis
metakaolin
self-compacting concrete
sustainable infrastructure
analiza powierzchni reakcji
beton samozagęszczalny
zrównoważona infrastruktura
Opis:
This research developed a mathematical model and optimization of materials for the development of metakaolin self-compacting concrete. This is in a bid to reduce the overall material quantity and cost towards sustainable infrastructural construction. To achieve the aim of this research, Response Surface Analysis (RSM) was used. Kaolinitic clay was De-hydroxylated at 750°C to form metakaolin. This was used as a partial replacement for cement at 0%, 5%, 10%, 15%, 20% and 25% weight of Portland limestone cement. Both strength and rheology properties of the developed metakaolin self-compacting concrete were assessed. To this end, slump flow, L-Box test and V-funnel test were carried out alongside the compressive strength using relevant standard. The result of the research revealed that at 15% addition of metakaolin the slump flow, passing ability and filling ability was unsatisfactory according to EFNARC standard. From the numerical optimization of the compressive strength, the maximum predicted compressive strength of 44.35 N/mm2 was obtained. At a low value of metakaolin addition (5–15%), the compressive strength increased as the age of the concrete increased from 3–150 days. The age with the optimum mechanical strength formation was 110 days with metakaolin addition of 52.73 kg. The result of this research provide a database for Engineers, Researchers and Construction workers on the optimum metakaolin required to achieve satisfactory mechanical strength in metakaolin self-compacting concrete.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 2; 7-13
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Surface Abrasive Treatment on the Strength of Galvanised Steel Sheet Adhesive Joints
Autorzy:
Miturska-Barańska, Izabela
Rudawska, Anna Rudawska
Powiązania:
https://bibliotekanauki.pl/articles/2022377.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adhesive joints
strength
galvanised sheet metal
abrasive treatment
Opis:
The aim of this study was to determine the effect of abrasive treatment as a method of surface preparation on the strength of adhesive joints made of galvanised steel sheet. The subject of experimental investigations were adhesive joints of samples made of galvanised steel sheet DX51, 0.7 mm thick. The surfaces of the samples were abraded with coated abrasive tools of grain sizes P120, P180, P220, P400 and P600, and then degreased with PIKKO extraction solvent. The surface properties in terms of roughness and 3D surface topography were examined using a Hommel-Etamic T8000 RC120-400. The adhesive joints were made using Epidian 53 epoxy resin adhesive composition and IDA curing agent in a 100:40 weight ratio. Samples of single-lap adhesive joints were tested for strength on a Zwick/Roell Z150 testing machine, in accordance with the PN - EN 1465:2009 standard. The tests showed that the samples mechanically processed with an abrasive tool of P220 gradation show the best strength properties. Adhesive joints, in which the surface of the joined elements was mechanically processed with an abrasive tool of P120 gradation, obtained negative results. The obtained test results were subjected to further statistical analysis. The Shapiro-Wilk test was used to assess the normality of the distribution. Then, the non-parametric Kruskal-Wallis test and the median test were applied, which showed that there were no significant differences in the results obtained between the adhesive joints whose surfaces were prepared with P220 and P400 abrasive paper, i.e. both methods of surface preparation can be considered as the most favourable among those analysed during the adhesive bonding of DX51 galvanised sheets.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 1; 75-84
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
Autorzy:
Doluk, Elżbieta
Rudawska, Anna
Brunella, Valentina
Powiązania:
https://bibliotekanauki.pl/articles/102066.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adhesive joint
shear strength
surface roughness
połączenie klejowe
wytrzymałość na ścinanie
chropowatość powierzchni
Opis:
The paper evaluates the effect of the surface treatment on the strength of the single‑lap adhesive joints made of the C45 steel. The samples were joined using an adhesive composition consisting of Epidian 57 epoxy resin and PAC curing agent. The study also used Greinplast mosaic plaster with a grain size of 1.0–1.6 mm as coating. The experiment was carried out for 3 variants of joints: sheet/sheet, sheet+plaster/sheet+plaster, sheet/sheet+plaster. Each variant was divided into 3 methods of surface treatment. The strength tests were carried out on the Zwick/Roell Z150 testing machine. The roughness parameters of the surface’s samples were measured using a HOMMEL TESTER T1000 profilometer.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 1; 107-115
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of degreasing on adhesive joint strength
Autorzy:
Rudawska, A.
Nalepa, J.
Müller, M.
Powiązania:
https://bibliotekanauki.pl/articles/102003.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adhesive joints
strength
surface treatment
degreasing
Opis:
The paper investigates the effects of degreasing, surface preparation methods in adhesive bonding and con adhesive joint strength. Five types of degreasing agents were used in the study: acetone, extraction naphtha, Ultramyt, Wiko and Loctite 7061. The degreasing operation was performed by three methods: rubbing, spraying and immersion. Strength tests were performed on single-lap adhesive joints of hot-dip galvanized metal sheets made with Loctite 9466 adhesive according to the above variants of surface preparation. The experimental results demonstrate that adhesive joint strength is significantly affected by the applied degreasing agent. Moreover, the method of application of the degreasing agent is crucial, too. The results of strength testing reveal that the most effective degreasing method for hot-dip galvanized metal sheet adhesive joints is spraying using extraction naphtha. Thereby, degreased samples have the highest immediate strength and shear strength. The use of extraction naphtha is also effective in combination with degreasing by rubbing; however, it is not effective when used in combination with immersion, as reflected in the lowest strength results.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 1; 75-81
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strength of Epoxy-Bonded Aluminium Alloy Joints After Sandblasting
Autorzy:
Rudawska, Anna
Wahab, Magd Abdel
Müller, Miroslav
Powiązania:
https://bibliotekanauki.pl/articles/2180222.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sandblasting
aluminium alloy
epoxy adhesive
adhesive joints strength
surface roughness
statistical analysis
Opis:
The purpose of this article is to investigate the effect of sandblasting surface treatment, before the bonding process, on the strength of the adhesive joints of the three types of aluminium alloy sheets. Three values of pressure were used during the sandblasting process, i.e. 0.41 MPa, 0.51 MPa and 0.56 MPa. After mechanical treatment, the samples of aluminium alloys sheets were degreased three times with acetone by immersion. The elements were bonded with single-lap joints using two components epoxy adhesive. After the curing process, the shear strength tests of the aluminium alloy adhesive joints were conducted, according to the DIN EN 1465 standard. The surface topography of all samples was measured, and the most important surface roughness parameter and its waviness were determined. Based on the experimental results, it was noticed that, among others, while using the same pressure value during sandblasting of different aluminium alloys, the roughness parameters Ra and Rz of the obtained surfaces differed depending on the type of alloy. It is also to notice that more than two times strength of the joints was obtained by those made of the aluminium alloy sheet, which was subjected to heat treatment.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 2; 262--279
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strength of Joints with “Hi-Lok” Fasteners in Aircraft Safety Considerations
Autorzy:
Kłonica, Mariusz
Bielawski, Radosław
Powiązania:
https://bibliotekanauki.pl/articles/101896.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aluminium alloy
carbon composite
surface layer
surface roughness
stop aluminium
kompozyt węglowy
warstwa powierzchniowa
chropowatość powierzchni
Opis:
This paper reports on the results of strength tests of single-lap joints used in the aerospace industry with “Hi-Lok” fastener. The samples subjected to testing were made of EN-AW 2024 aluminium alloy and carbon composite. A part of the samples was additionally sealed with the use of Naftoseal MC-780 Class C sealant. The application of the MC-780 Class C sealant boosts the strength of a single lap joint of EN-AW 2024 T3 Al alloy and carbon composite. The strength test results were complemented with the analysis of selected 2D and 3D surface roughness parameters, and isometric images of the analysed surfaces. Additional information on the specimen surface quality was provided with photographic images taken with Keyence VHX-5000 microscope at x300 magnification. In the conclusion section of this paper, the study is summarised and its key findings are listed.
Źródło:
Advances in Science and Technology. Research Journal; 2019, 13, 4; 87-93
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of selected technological and material parameters on the strength of adhesive steel sheets joints
Autorzy:
Rudawska, A.
Głogowska, K.
Vitenko, T.
Stančeková, D.
Čuboňová, N.
Kasperek, D.
Powiązania:
https://bibliotekanauki.pl/articles/103104.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adhesive joints
steel sheets
corrosion
ageing
strength
surface treatment
Opis:
The following paper analyses selected problems regarding the impact of technological parameters and the type of adherend material on the strength of adhesive-bonded steel sheet joints. The subject of the test was a single-lap adhesive joint of S235JR steel sheet. Joints were formed on two types of substrates: with or without corrosion products on the surface. The surface of steel sheet adherends was pre-treated with three cleaning solutions: acetone, Wiko industrial degreasing agent and Cortanin F anti-corrosion agent, depending on the state of the surface. Adhesive joints were formed with Epidian 53/ET/100:15 epoxy adhesive. The formed joints were subjected to one of three ageing variants: 14 days, two months and 3 months, which were followed by destructive testing to determine the shear strength of joints. The analysis of results obtained in the tests indicates that the strength performance of adhesive joints of corrosion-free adherends was characterised by higher values than in corroded steel sheets, regardless of ageing time.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 2; 8-16
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Tests of Shear Strength of Adhesive Lap Joints after Thermal Shocks
Autorzy:
Kłonica, Mariusz
Bielawski, Radosław
Żokowski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2023325.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
surface roughness
surface layer
thermal cycling
adhesive joint
316L steel
chropowatość powierzchni
warstwa powierzchniowa
cykle termiczne
spoina klejowa
stal 316L
Opis:
This work presents the results of comparative tests for the determination of Young’s modulus and the static shear strength of adhesive lap joints, based on grade 316L steel. The tests also concerned the determination of the glass transition temperature of a certain adhesive composition: Epidian 57 epoxy resin with a 10% Z1 hardener content. The paper shows the test results for the surface free energy and selected surface roughness parameters, including photographs of the test specimens after destructive testing. The tests were comparative and performed on adhesive joints, with and without exposure to thermal cycling. The scope of the testing included a relatively short thermal cycling run of 500 cycles with a temperature variation of -40°C to +60°C. An analysis was carried out of the results from testing the static shear resistance of specimens manufactured using various methods of adhesive joint seasoning. The experimental test results were statistically processed in compliance with good research practice.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 4; 364-375
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of abrasive waterjet peening surface treatment of steel plates on the strength of single–lap adhesive joints
Autorzy:
Anasiewicz, K.
Kuczmaszewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/103136.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
abrasive waterjet peening
AWJP
adhesive bonding
lap joints
Opis:
The paper presents the results of a comparative study of shear strength of single–lap adhesive joints, depending on the method of surface preparation of steel plates with increased corrosion resistance. The method of preparing adherend surfaces is often one of the most important factors determining the strength of adhesive joints. Appropriate geometric surface development and cleaning of the surface enhances adhesion forces between adherend material and adhesive. One of the methods of shaping engineering materials is waterjet cutting, which in the AWJP – abrasive waterjet peening variant, serves to shape flat surfaces of the material by changing the roughness and introducing stresses into the surface layer. These changes are valuable when preparing adhesive joints. In the study, surface roughness parameters obtained with AWJP treatment, were analyzed in direct relation to the strength of the adhesive joint. As a consequence of the experimental results analysis, the increase in the strength of the adhesive joints was observed in a certain range of parameters used for AWJP treatment. A decrease in shear strength of adhesive joint with the most modified topography of overlap surface was observed.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 3; 270-276
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies