Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wu, J.W." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Observation and Control of Interfacial Defects in ZnO/ZnSe Coaxial Nanowires
Autorzy:
Bhutto, W.
Wu, Z.
Cao, Y.
Wang, W.
Kang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1361939.pdf
Data publikacji:
2014-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
62.23.Hj
61.46.Km
64.70.Nd
68.35.Ct
Opis:
ZnO/ZnSe coaxial nanowires with different ZnO core diameters were synthesized by using a two-step chemical vapor deposition. The scanning electron microscopy images demonstrated that the coaxial nanowires with small ZnO core diameter had the smoother surface than that with large ZnO core diameter. A coherent ZnSe layer with wurtzite structure was observed in the nanowire interface between the ZnO core and the ZnSe shell by high resolution transmission electron microscopy. This coherent layer is beneficial to reduce the defect density and improve the crystal quality by suppressing the phase transition. It was found that the coherent thickness was significantly related to the ZnO core diameter. For the nanowire with large ZnO core, a thin critical thickness of 2 - 3 nm was obtained. As a result, a layer of zinc blende ZnSe appeared outside the nanowire, and a lot of defects existed in the interface between the ZnSe layers with different phase structures. For the nanowire with small ZnO core, however, the critical thickness increased and a coherent coaxial structure was observed with the same lattice spacing in the ZnO core and the ZnSe shell. To obtain defect-free coaxial nanowire, an optimal structure was also proposed by theoretical calculation.
Źródło:
Acta Physica Polonica A; 2014, 125, 4; 994-996
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Design and the First Test Results of a Fast LTD Stage
Autorzy:
Chen, L.
Zhou, L.
Zou, W.
Ren, J.
Li, Y.
Wu, S.
Xie, W.
Feng, S.
Deng, J.
Powiązania:
https://bibliotekanauki.pl/articles/1807988.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
84.70.+p
52.75.Kq
84.60.Ve
Opis:
Linear transformer driver stages are designed to be used as a primary energy storage in high power pulsed generators. In this report, the design and test results of the linear transformer driver stage prototype that delivers ≈100 kA fast pulse with 133 ns FWHM into a ≈0.87 Ω resistive load are described. This stage consists of 20 (100 kV, 20 nF) storage capacitors that are arranged in 10 identical bricks located evenly around the axis of the stage. Each brick contains two capacitors, a multi-gap switch, and the output connector that transfers the energy to the resistive load. The outer diameter of the stage is ≈1.5 m, at a length of ≈20 cm. The stage is developed to demonstrate the possibility of the fast linear transformer driver technology to create high power pulsed generators.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1186-1188
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a 20 kJ Sparker for High Resolution Ocean Seismic Survey
Autorzy:
Sun, Y.
Gao, Y.
Yan, P.
Wang, J.
Yuan, W.
Wu, H.
Wang, Y.
Wan, P.
Zhao, G.
Powiązania:
https://bibliotekanauki.pl/articles/1807914.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.80.Wq
43.30.+m
Opis:
An ocean sparker with a stored energy of 20 kJ was developed for high resolution ocean seismic survey. The sparker is mainly composed of a high voltage high frequency charging supply, energy storage capacitors, a discharging switch and discharging electrodes. The H-bridge inverter and series resonant mode were adopted in the charging supply, and a dry high voltage transformer was used to improve the safety and maintenance, the average charging rate exceeded 4 kJ/s. An optical fiber connected between the high voltage system and the control system was used to isolate high voltage and transmit the high voltage signal. The high voltage electrodes of the discharging electrodes consisted of several hundreds of electrodes. The experimental results show that the sparker can be operated at repetition rates of 12 shots/min, and can meet the expected design requirements. Further field tests will be done in the near future.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1059-1061
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies