Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "park, J." wg kryterium: Wszystkie pola


Wyświetlanie 1-11 z 11
Tytuł:
Synthesis and Characterization of a Water-Soluble Ionic Polyacetylene Derivative
Autorzy:
Gal, Y.
Jin, S.
Park, J.
Lim, K.
Powiązania:
https://bibliotekanauki.pl/articles/1398739.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.80.L
73.61.P
78.20.C
78.30.J
Opis:
A new water-soluble ionic polyacetylene was synthesized by the acid-catalyzed polymerization of 2-ethynylpyridine using acrylic acid. The polymerization proceeded well to give a high yield of polymer. The acetylenic C ≡ C bond stretching (2110 cm¯¹) and acetylenic ≡ C-H bond stretching (3293 cm¯¹) peaks of 2-ethynylpyridine monomer were not seen in the FT-IR spectrum of polymer. The electro-optical and electrical properties of the ionic polyacetylene were measured and discussed. The resulting polymer showed strong maximum at 513 nm in the UV-Visible absorption, which is corresponding to photon energy of 2.42 eV. The energy gap width of polymer was estimated to be of 2.08 eV. It was observed that the electrochemical process of polymer is reproducible in the potential range of -1.80 to 1.60 V vs Ag/AgNO₃. HOMO and LUMO levels of polymer were 4.85 eV and 2.77 eV, respectively.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 642-646
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth of NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ Superconducting Thin Films on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) Substrates
Autorzy:
Park, J.-C.
Ha, D. H.
Kim, I.-S.
Park, Y.K.
Powiązania:
https://bibliotekanauki.pl/articles/1964239.pdf
Data publikacji:
1997-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.76.Bz
Opis:
NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ superconducting thin films were grown on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) substrates by off-axis rf sputtering and pulsed laser deposition. The effects of several deposition parameters, e.g. gas pressure, substrate temperature and energy density were studied. Thin films grown by off-axis rf sputtering were highly c-axis oriented, but those by pulsed laser deposition were predominantly a-axis oriented under our deposition conditions. However, the c-axis oriented portion for the films grown by pulsed laser deposition was increased by increasing the temperature above 800°C. T$\text{}_{c(zero)}$ was 87 K and 83 K for the c- and a-axis oriented films respectively. The critical current density of c-axis oriented films was 10$\text{}^{6}$-10$\text{}^{7}$ A/cm$\text{}^{2}$ below 60 K.
Źródło:
Acta Physica Polonica A; 1997, 92, 1; 105-114
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Frustrated zig-zag spin chains formed by hydrogen bonds in [Cu(H₂O)(OH)(tmen)]₂[Pd(CN)₄]·2H₂O
Autorzy:
Čižmár, E.
Orendáčová, A.
Orendáč, M.
Kuchár, J.
Feher, A.
Park, J.
Meisel, M.
Powiązania:
https://bibliotekanauki.pl/articles/1054768.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.Et
76.30.-v
75.40.-s
Opis:
The magnetic properties of the novel dimeric compound [Cu(H₂O)(OH)(tmen)]₂[Pd(CN)₄]·2H₂O (tmen=N,N,N',N'-tetramethylethylenediamine) with modulated crystal structure were studied in the temperature range from 95 mK to 300 K. Magnetic measurements revealed a presence of weak antiferromagnetic exchange coupling in the compound. The temperature dependence of specific heat is characterized by the presence of a Schottky-like maximum at 0.47 K and a λ-anomaly at 0.28 K, indicating the formation of long-range order in the system. The comparison of the experimental data with theoretical predictions revealed the presence of antiferromagnetic intradimer exchange coupling J/k_{B}= -1.2 K and interdimer coupling of a similar strength mediated via hydrogen bonds between dimeric units forming a frustrated magnetic zig-zag chain structure.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 940-942
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
$CuBr_2(C_{10}H_8N_2) - S = 1//2$ Two-Dimensional Rectangular Heisenberg Antiferromagnet
Autorzy:
Čižmár, E.
Kajňaková, M.
Orendáčová, A.
Orendáč, M.
Feher, A.
Anders, A.
Park, J.
Meisel, M.
Powiązania:
https://bibliotekanauki.pl/articles/1534990.pdf
Data publikacji:
2010-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.Et
75.50.Ee
76.30.-v
Opis:
Magnetic susceptibility and X-band electron spin resonance study of a two-dimensional Heisenberg antiferromagnetic system $CuBr_2$(bipy), where bipy = $C_{10}H_8N_2$ is 4,4'-bipyridyl, has been performed in the temperature range from 300 K down to 2 K. A rhombic anisotropy of the g-factor was obtained from X-band EPR measurements with $g_{x}$ = 2.037, $g_{y}$ = 2.100 and $g_{z}$ = 2.219. The temperature dependence of the magnetic susceptibility with a round maximum observed at 28 K suggests antiferromagnetic type of short-range order. No signature of the magnetic long-range order in studied compound was observed. The comparison of the magnetic susceptibility data with a two-dimensional rectangular Heisenberg model yields the values of intralayer exchange couplings J/$k_{B}$ = - 47 K and J'/$k_{B}$ = - 9.4 K.
Źródło:
Acta Physica Polonica A; 2010, 118, 5; 973-974
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Response of Mn(III)F(salen) at Low Temperatures
Autorzy:
Park, J.
Risset, O.
Shiddiq, M.
Peprah, M.
Knowles, E.
Andrus, M.
Beedle, C.
Ehlers, G.
Podlesnyak, A.
Čižmár, E.
Nagler, S.
Hill, S.
Talham, D.
Meisel, M.
Powiązania:
https://bibliotekanauki.pl/articles/1368508.pdf
Data publikacji:
2014-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Ee
78.70.Nx
76.30.-v
75.10.Jm
Opis:
The low temperature magnetic response of Mn(III)F(salen), salen = $H_{14}C_{16}N_{2}O_{2}$, an S=2 linear-chain system, has been studied. Using a single crystal with the field applied perpendicular to the chain direction, torque magnetometry, down to 20 mK and up to 18 T, revealed a feature at 3.8 T when T ≤ 400 mK. ESR ( ≈200 GHz) studies, using single crystals at 4 K and in 5 T, have not detected any signal. In 10 mT, the temperature dependence of the susceptibility of powder-like samples can be reasonably fit when J/$k_{B}$=50 K and g=2. In addition, these data are unchanged for P ≤1.0 GPa. Using a randomly-oriented, powder-like, deuterated (12 of 14 H replaced by D) sample of 2.2 g at 270 mK, neutron scattering data, acquired with the Cold Neutron Chopper Spectrometer at the Spallation Neutron Source, show several well defined excitations that may be from the zero-field energy levels of antiferromagnetic S=2 spins with g=2, J/$k_{B}$=50 K, D/$k_{B}$=2.8 K, and E/$k_{B}$=0.5 K.
Źródło:
Acta Physica Polonica A; 2014, 126, 1; 228-229
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biological Evaluation of Anodized Biodegradable Magnesium-Calcium Alloys
Autorzy:
Kim, J.
Lee, J.
Lee, K.
Park, S.
Lim, H.
Park, C.
Bae, J.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1398763.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.J-
Opis:
The objective of this study was to evaluate the biocompatibility of studied binary magnesium-calcium (Mg-Ca) alloys for biodegradable intraosseous implants. Mg is necessary for health and is a non-toxic biodegradable material that decomposes naturally in the body. Nevertheless, Mg has been implicated in problems including diminished physical properties and corrosion resistance when degradation is too rapid prior to bone healing. This study has explored the effect of Ca on the corrosion resistance and biological evaluation after anodizing treatment with different contents of Ca alloy. Binary Mg-0.5Ca, Mg-1Ca and Mg-5Ca alloys were prepared by the casting method under an argon atmosphere and cut into disc-shaped pieces. Pure Mg alloy was used as the control. Anodic oxidation was performed for 15 minutes at a voltage of 120 V using an electrolyte solution containing Ca gluconate, sodium hexametaphosphate, and sodium hydroxide at room temperature. Corrosion resistance was analyzed using a corrosion tester. After a hydrogen evolution test, the surface pattern and phase changes were observed on a scanning electron microscop (SEM) and energy dispersive spectroscop (EDS). Microscopic evaluation of the adhesion and cell biological functions of Mg was conducted by observing the response of human fetal osteoblastic 1.19 cells with regard to changes in surface film properties, depending on the amount of Ca. Our results support the view that in Mg-xCa alloys (x=0.5, 1, 5 wt.%) treated using anodic oxidation, the increasing Ca content controls the rate of decomposition and improves corrosion resistance.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 728-735
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variable-Focus Fluid Lens Using an Electromagnetic Actuator
Autorzy:
Lee, J.
Park, K.
Choi, J.
Kim, H.
Kong, S.
Powiązania:
https://bibliotekanauki.pl/articles/1399681.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
85.85.+j
42.79.Bh
Opis:
A variable-focus fluid lens controlled by an electromagnetic actuator and its characteristics are presented in this paper. The repulsive force between an NdFeB magnet and a solenoid through electromagnetic induction causes deflections in the elastomeric membranes integrated in the lens resulting in a focal-length change. The controllability of the focal length of the fabricated lens with an aperture size of 2 mm was approximately from infinity to 15 mm (with input current of 100 mA). The actuator including the solenoid was carefully designed to avoid thermal crosstalk of the lens fluid and magnet from the electromagnetic induction of the solenoid. The settling time to form a convex shape of the lens membrane was approximately 2.5 ms at an input current of 20 mA.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 202-204
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quietness in the Soundscape of the Białowieża National Park
Autorzy:
Wiciak, J.
Mleczko, D.
Ozga, A.
Wszołek, G.
Wierzbicki, J.
Piechowicz, J.
Małecki, P.
Powiązania:
https://bibliotekanauki.pl/articles/1402187.pdf
Data publikacji:
2015-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.66.-x
43.66.+y
87.18.Tt
87.19.lc
43.50.Rq
Opis:
The quietness, defined as the near or complete absence of sound, in the context of the natural environment protection, may be considered a state in which no undesired of foreign sounds occur, and, by analogy to noise, analyzed in two aspects: that pertaining to measurements and the subjective one. The article discusses the lowest levels of sounds recorded at night in the soundscape of the Białowieża Forest. Due to low levels of the examined sounds and the technical problems that occurred while the sounds were being measured and registered, the acoustic examination of the measurement set-up in an anechoic chamber has also been presented. The research is aimed at defining precisely the concept of quietness prevailing in the nature in the subjective aspect by determining both the range of levels and the characteristics of preferred sounds.
Źródło:
Acta Physica Polonica A; 2015, 128, 1A; A-79-A-84
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation
Autorzy:
Kim, J.
Lee, J.
Yang, H.
Park, S.
Lim, H.
Oh, G.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1191716.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.jc
Opis:
The purpose of this study was to determine the effect of calcium (Ca) on the surface characteristics and physical properties of magnesium-calcium alloys after anodization. A novel binary alloy Mg-xCa (in which x=0.5, 1, or 5 wt.%) was cast by combining magnesium (99.9%) and calcium (99.9%) in an argon gas (99.99%) atmosphere. A magnesium alloy rod having a diameter of 15 mm was cut into discs, each 2 mm thick. The specimens were subjected to anodic oxidation at 120 V for 15 minutes at room temperature in an electrolyte solution consisting of calcium gluconate, sodium hexametaphosphate, and sodium hydroxide. Surface and cross-sectional morphological changes were observed using scanning electron microscopy, and the microstructures and phases were detected by means of X-ray diffraction. Hardness and surface roughness were assessed by means of a Vickers hardness tester and a surface roughness meter, respectively. The results show that the physical properties of these magnesium-calcium alloys have been improved, because it was possible to control the dissolution rate according to the amount of calcium added.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 736-741
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure, morphology, and band gap of Ti-V-O mixed oxides processed by coprecipitation and calcination
Autorzy:
Park, M.
Lim, Y.
Sung, Y.
Kwak, D.
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/1061893.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Hd
Opis:
Mixed oxides of Ti-V-O were co-precipitated by wet process using TiCl₄ and VOCl₃ as starting materials. As-precipitated gels were calcinated at 800°C for 4 hours in oxygen atmosphere. Effects of vanadium content on the structural evolution, morphology, and band gap of Ti-V-O oxides were investigated. Calcination has produced mixtures of TiO₂/VO₂/V₂O₅ oxides and has allowed formation of Ti_{1-x}V_{x}O₂. Lattice parameters of rutile TiO₂ were precisely measured to investigate vanadium substitution into single rutile phase of Ti_{1-x}V_{x}O₂ with varying vanadium content. As vanadium addition was increased, particles were coarsening rapidly during calcination. Band gap of the Ti-V-O oxides was measured using ultraviolet visible light spectrometer. A decrease of band gap down to 1.7 eV with the addition of maximum of 10 at.% of vanadium was measured, which is due to the formation of single phase of Ti_{1-x}V_{x}O₂ as well as the formation of metallic VO₂ or V₂O₅ particles.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 875-877
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Properties of Hydrothermally Synthesized ZnO and $Zn_{0.99}O:Eu^{3+}$ Powders
Autorzy:
Park, K.
Hakeem, D.
Kim, J.
Kim, Y.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1398243.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.55.-m
78.55.Hx
78.55.Et
Opis:
The structural and optical properties of the ZnO and $Zn_{0.99}O:Eu^{3+}$ powders synthesized by the hydrothermal method at two different temperatures (150°C and 250°C) were studied. The ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 150 and 250°C showed rod- and flower-like morphologies, respectively. The as-synthesized and annealed ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders formed the wurtzite crystal structure and P6₃mc space group. The crystallite size of the as-synthesized and annealed ZnO powders increased by the incorporation of $Eu^{3+}. The photoluminescence properties of annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders were substantially improved by controlling the synthesis temperature. The annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 250°C displayed much stronger emission intensity than those at 150°C.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 902-906
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies