Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "energy harvesting" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Ideal rectifier bridge converting the harvested energy of vibrations into electric energy to power an mr damper
Autorzy:
Sapiński, Bogdan
Jastrzębski, Łukasz
Kozieł, Arkadiusz
Powiązania:
https://bibliotekanauki.pl/articles/1837924.pdf
Data publikacji:
2020
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
energy harvesting
rectifier bridge
voltage
current
MR damper
Opis:
The newly developed ideal rectifier bridge equipped with four N-type MOSFETs and two rail-to-rail operational amplifiers is a part of a typical energy harvesting conditioning circuit responsible for the rectification stage in the system of converting the energy harvested from vibrations into electrical energy to power the MR damper. The only energy loss in the bridge is caused by the voltage loss in transistors’ channels. The first sections of the work summarises the structural design of the bridge, the simulation procedure under the RL load and by sine voltage inputs with predetermined frequency and amplitude range, and benchmarks the results against those obtained for the conventional bridge based on Schottky diodes. In the second section, the PCB prototype of the bridge is analysed, and measurement data are compiled. The third section reports on the laboratory testing of the developed bridge converting the harvested energy in an MR damper-based vibration reduction system.
Źródło:
Acta Mechanica et Automatica; 2020, 14, 4; 198-205
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetorheological self-powered vibration reduction system with current cut-off: experimental investigation
Autorzy:
Jastrzębski, Ł.
Sapiński, B.
Powiązania:
https://bibliotekanauki.pl/articles/386843.pdf
Data publikacji:
2018
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
MR damper
vibration
energy harvesting
current cut-off circuit
Opis:
The paper summarises the results of laboratory testing of an energy harvesting vibration reduction system based on a magnetorheological (MR) damper whose control circuit incorporates a battery of bipolar electrolytic capacitors (current cut-off circuit). It is designed to reduce the undesired effects in vibration reduction systems of this type, associated with the increasing amplitude of the sprung mass vibration under the excitation inputs whose frequency should exceed the resonance frequency of the entire system. Results have demonstrated that incorporating a current cut-off circuit results in a significant decrease of sprung mass vibration amplitudes when the frequency of acting excitation inputs is higher than the resonance frequency.
Źródło:
Acta Mechanica et Automatica; 2018, 12, 2; 96-100
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy recovery from a non-linear electromagnetic system
Autorzy:
Kęcik, K.
Powiązania:
https://bibliotekanauki.pl/articles/386921.pdf
Data publikacji:
2018
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
magnetic pseudo-levitation
energy harvesting
vibration
electromagnetic coupling
attractor coexistence
Opis:
The paper presents study of a pseudo-magnetic levitation system (pseudo-maglev) dedicated for energy harvesting. The idea rely on motion of a pseudo-levitating magnet in a coil’s terminal. The study based on real prototype harvester system, which in the pendulum dynamic vibration absorber is applied. For some parameters, the stability loss caused by the period doubling bifurcation is detected. The coexistence of two stable solutions, one of which is much better for energy harvesting is observed. The influence of the pseudo-maglev parameters on the recovered current and stability of the periodic solutions is presented in detail. The obtained results show, that the best energy recovery occurs for the high pseudo-maglev stiffness and close to the coil resistance. The amplitude’s excitation, the load resistances and the coupling coefficient strongly influence on the system’s response.
Źródło:
Acta Mechanica et Automatica; 2018, 12, 1; 11-18
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental validation of equivalent circuit modelling of the piezo-stripe harvester attached to the sfsf rectangular plate
Autorzy:
Koszewnik, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/386747.pdf
Data publikacji:
2020
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
aluminium plate
piezo - harvester
energy harvesting system
modal analysis
Equivalent Circuit Model
ECM
Opis:
Plate-like structures with attached piezo-patch elements are widely used in marine, aerospace and civil infrastructure applications to power small devices with low power demand or used for monitoring of vibration structures. In order to assess the feasibility of an energy harvesting system to generate power output from a harvester, an accurate electromechanical model of the piezo-patch harvester attached to a 2D structure in modal coordinates is required. Taking into account this fact, this study is focused on the analysis of the piezoharvester orientations on the SFSF (Simply Supported-Free-Simply Supported-Free) plate undergoing forced dynamic excitation. The results obtained from the numerical analysis of a smart structure led to determining quasi-optimal piezo-harvester location on the structure, and next, to determining a multi-mode representation of the equivalent circuit model. The experimental set-up carried out on the lab stand properly verified the parameters of the ECM model. Finally, the proposed approach can be used for the structural health monitoring of vibration of some 2D mechanical structures like the front wall of a dishwasher.
Źródło:
Acta Mechanica et Automatica; 2020, 14, 1; 8-15
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical interface for a self-powered MR damper-based vibration reduction system
Autorzy:
Jastrzębski, Ł.
Sapiński, B.
Powiązania:
https://bibliotekanauki.pl/articles/386633.pdf
Data publikacji:
2016
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
vibration
electrical interface
MR damper
energy harvesting
wibracja
tłumik MR
symulacja komputerowa
redukcja wibracji
Opis:
The study investigates the behaviour of an electrical interface incorporated in a MR damper-based vibration reduction system powered with energy recovered from vibration. The interface, comprising the R, L and C elements, is connected in between the coil in an electromagnetic electric generator and the control coil in the MR damper and its function is to convert the output voltage from the generator. The interface model was formulated and computer simulations were performed to find out how the parameters of the interface should influence the frequency responses of the vibration reduction system.
Źródło:
Acta Mechanica et Automatica; 2016, 10, 3; 165-172
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling and testing of the piezoelectric beam as energy harvesting system
Autorzy:
Koszewnik, A.
Wernio, A.
Powiązania:
https://bibliotekanauki.pl/articles/387640.pdf
Data publikacji:
2016
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
cantilever beam
piezo-actuator
energy harvesting system
modal analysis
belka wspornikowa
analiza modalna
piezo siłownik
Opis:
The paper describes modelling and testing of the piezoelectric beam as energy harvesting system. The cantilever beam with two piezo-elements glued onto its surface is considered in the paper. As result of carried out modal analysis of the beam the natural frequencies and modes shapes are determined. The obtained results in the way mentioned above allow to estimate such location of the piezoactuator on the beam where the piezo generates maximal values of modal control forces. Experimental investigations carried out in the laboratory allow to verify results of natural frequencies obtained during simulation and also testing of the beam in order to obtain voltage from vibration with help of the piezo-harvester. The obtained values of voltage stored on the capacitor 0 shown that the best results are achieved for the beam excited to vibration with third natural frequency, but the worst results for the beam oscillating with the first natural frequency.
Źródło:
Acta Mechanica et Automatica; 2016, 10, 4; 291-295
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental setup for testing rotary mr dampers with energy harvesting capability
Autorzy:
Sapiński, B.
Węgrzynowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/386685.pdf
Data publikacji:
2013
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
obrotowy tłumik MR
instalacja eksperymentalna
uzyskiwanie energii
MR rotary damper
experimental set-up
energy harvesting
Opis:
The experimental setup has been developed for laboratory testing of electromechanical energy transducers and rotary magne-torheological (MR) dampers. The design objectives are outlined and the parameters of the key elements of the setup are summarised. The structure of the mechanical and measurement and control systems is presented. Results of functional testing of a newly developed trans-ducer and a MR rotary damper are summarised.
Źródło:
Acta Mechanica et Automatica; 2013, 7, 4; 241-244
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies