Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, Sung-Jin" wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Effect of Atmospheric-Pressure Gas-Plasma Treatment on Surface Properties of Hot-Dip Zn-Mg-Al Alloy-Coated Steel
Autorzy:
Jeong, Chang-U
Kim, Jae-Hyeon
Park, Je-Shin
Kim, Min-Su
Kim, Sung-Jin
Oh, Min-Suk
Powiązania:
https://bibliotekanauki.pl/articles/2203736.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
plasma treatment
Zn-Mg-Al-galvanized steel
surface energy
process gas
Opis:
The effect of plasma-radical change on the surface properties of Zn-Mg-Al ternary-alloy-coated steel sheets during atmospheric-pressure (AP) plasma treatment using different process gases: O2, N2, and compressed air was investigated. The plasma-induced radicals promoted the formation of chemical particles on the surface of the Zn-Mg-Al coating, thereby increasing the surface roughness. The surface energy was calculated using the Owen-Wendt geometric equation. Contact angle measurements indicated that the surface free energy of the alloy sheets increased upon AP plasma treatment. The surface properties of the Zn-Mg-Al coating changed more significantly in the order air > O2 > N2 gas, indicating that the plasma radicals facilitated the carbonization and hydroxylation of the Mg and Al components during the AP plasma treatment.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 187--190
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manufacture of MoO3 Coating Layer Using Thermal Spray Process and Analysis of Microstructure and Properties
Autorzy:
Hwang, Yu-Jin
Kim, Kyu-Sik
Park, Jae-Sung
Lee, Kee-Ahn
Powiązania:
https://bibliotekanauki.pl/articles/2174568.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MoO3
thermal spray
atmospheric plasma spray
microstructure
properties
Opis:
MoO3 thick film was manufactured by using a thermal spray process (Atmospheric Plasma Spray, or APS) and its micro-structure, phase composition and properties of the coating layer were investigated. Initial powder feedstock was composed of an orthorhombic α-MoO3 phase, and the average powder particle size was 6.7 μm. As a result of the APS coating process, a MoO3 coating layer with a thickness of about 90 μm was obtained. Phase transformation occurred during the process, and the coating layer consisted of not only α-MoO3 but also β-MoO3, MoO2. Phase transformation could be due to the rapid cooling that occurred during the process. The properties of the coating layer were evaluated using a nano indentation test. Hardness and reduced modulus were obtained as 0.47 GPa and 1.4 GPa, respectively. Based on the above results, the possibility of manufacturing a MoO3 thick coating layer using thermal spray is presented.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 4; 1535--1538
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microzooplankton in a Warming Arctic: A Comparison of Tintinnids and Radiolarians from Summer 2011 and 2012 in the Chukchi Sea
Autorzy:
Dolan, John R.
Yang, Eun Jin
Kim, Tae Wan
Kang, Sung-Ho
Powiązania:
https://bibliotekanauki.pl/articles/763780.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
Climate change, plankton, rhizaria, sea ice, Tintinnina
Opis:
The Chukchi Sea was sampled in August of 2011, a year of near-normal sea ice among recent years, and again in August 2012, a year of all time record low sea ice. We exploited this sampling to test the hypothesis that different sea ice conditions are associated with differences in abundances or species composition of microzooplankton through an examination of tintinnids and radiolarians. From 18 stations in 2011, and 19 stations in 2012, organisms were enumerated in plankton net tow material, and chlorophyll determinations made (total and ≤ 20 μm) from discrete depth samples. We found that the low sea ice conditions of 2012 were associated with higher chlorophyll concentrations (both total and the ≤ 20 μm size fraction), compared to 2011. However, tintinnid ciliates and radiolarians were much lower in concentration, by about an order of magnitude, compared to 2011. In both years the radiolarian assemblage was dominated by Amphiselma setosa. The species composition of the tintinnid ciliates was similar in the two years, but there were distinct differences in the relative abundances of certain species. The 2012, low sea ice assemblage, was dominated by small forms in contrast to 2011, when large species were the most abundant. We present these findings in detail and discuss possible explanations for the apparent differences in the microzooplankton communities associated with distinct sea ice conditions in the Chukchi Sea.
Źródło:
Acta Protozoologica; 2014, 53, 1
1689-0027
Pojawia się w:
Acta Protozoologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Education and Research on Polish Studies in Korea
Autorzy:
Cheong, Kwon Byung
Kim, Jong Suck
Choi, Sung Eun (Estera Czoj)
Kim, Yong Deog
Kim, Ji Young
Lee, Ok Jin
Lee, Ji Wone
Koh, Seung Hui
Powiązania:
https://bibliotekanauki.pl/articles/26414309.pdf
Data publikacji:
2013-06-30
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
Polish studies
Korea
Department of Polish Studies
HUFS
Opis:
Polish education and research in Korea has become systematic since the establishment of the Department of Polish Studies at Hankuk University of Foreign Studies (HUFS). The Department of Polish Studies at HUFS is the only academic department in Korea which teaches and studies the politics, economy, history, and culture of Poland, as well as the Polish language and literature. Since its establishment in 1987, the department has produced more than 800 graduates. The Department of Polish Studies forms and maintains a close relationship with universities in Poland. It also makes continuous effort for more students to study the Polish language at universities in Poland.
Źródło:
The New Educational Review; 2013, 32; 19-34
1732-6729
Pojawia się w:
The New Educational Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High-Efficiency Cooling System Using Additive Manufacturing
Autorzy:
Woo, Yeong-Jin
Nam, Dong-Ho
Lee, Seok-Rok
Kim, Eun-Ah
Lee, Woo-Jin
Yang, Dong-Yeol
Yu, Ji-Hun
Park, Yong-Ho
Lee, Hak-Sung
Powiązania:
https://bibliotekanauki.pl/articles/2049198.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
additive manufacturing
DfAM
Design for Additive Manufacturing
cooling system
lattice structure
simulation
Opis:
In this study, we propose a cooling structure manufactured using a specialized three-dimensional (3D) printing design method. A cooling performance test system with complex geometry that used a thermoelectric module was manufactured using metal 3D printing. A test model was constructed by applying additive manufacturing simulation and computational fluid analysis techniques, and the correlation between each element and cooling efficiency was examined. in this study, the evaluation was conducted using a thermoelectric module base cooling efficiency measurement system. The contents were compared and analyzed by predicting the manufacturing possibility and cooling efficiency, through additive manufacturing simulation and computational fluid analysis techniques, respectively.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 689-693
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of ZrO2 and Al2O3 Addition on the Physical Properties of Cu-Mo-Cr Alloy by Liquid Phase Sintering
Autorzy:
Cho, Yeong-Woo
Sim, Jae-Jin
Heo, Sung-Gue
Kim, Hyun-Chul
Lee, Yong-Kwan
Byeon, Jong-Soo
Lee, Yong-Tak
Lee, Kee-Ahn
Seo, Seok-Jun
Park, Kyoung-Tae
Powiązania:
https://bibliotekanauki.pl/articles/2049193.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al2O3
ZrO2
Cu-Mo-Cr
sintering
powder metallurgy
Opis:
In this study, the effect of the addition of ZrO2 and Al2O3 ceramic powders to Cu-Mo-Cr alloy was studied by examining the physical properties of the composite material. The ceramic additives were selected based on the thermodynamic stability calculation of the Cu-Mo-Cr alloys. Elemental powders, in the ratio Cu:Mo:Cr = 60:30:10 (wt.%), and approximately 0-1.2 wt.% of ZrO2 and Al2O3 were mixed, and a green compact was formed by pressing the mixture under 186 MPa pressure and sintering at 1250°C for 5 h. The raw powders were evenly dispersed in the mixed powder, as observed by scanning electron microscopy. After sintering, the microstructures, densities, electrical conductivities, and hardness of the composites were evaluated. We found that the addition of ZrO2 and Al2O3 increased the hardness and decreased the electrical conductivity and density of the composites.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 683-687
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of High-Purity Tantalum Metal Powder for Capacitors Using Self-Propagating High-Temperature Synthesis
Autorzy:
Lee, Yong-Kwan
Sim, Jae-Jin
Byeon, Jong-Soo
Lee, Yong-Tak
Cho, Yeong-Woo
Kim, Hyun-Chul
Heo, Sung-Gue
Lee, Kee-Ahn
Seo, Seok-Jun
Park, Kyoung-Tae
Powiązania:
https://bibliotekanauki.pl/articles/2049150.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tantalum
self-propagating high-temperature synthesis
tantalum oxide
magnesium
capacitor
Opis:
In this study, high-purity tantalum metal powder was manufactured via self-propagating high-temperature synthesis. During the process, Ta2O5 and Mg were used as the raw material powder and the reducing agent, respectively, and given that combustion rate and reaction temperature are important factors that influence the success of this process, these factors were controlled by adding an excessive mass of the reducing agent (Mg) i.e., above the chemical equivalent, rather than by using a separate diluent. It was confirmed that Ta metal powder manufactured after the process was ultimately manufactured 99.98% high purity Ta metal powder with 0.5 μm particle size. Thus, it was observed that adding the reducing reagent in excess favored the manufacture of high-purity Ta powder that can be applied in capacitors.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 935-939
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies