Wszystkie pola: Srivastava, V. C. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Effect of Hydraulic Retention Time and Filling Time on Simultaneous Biodegradation of Phenol, Resorcinol and Catechol in a Sequencing Batch Reactor
Autorzy:: Thakur, C.
Mall, I. D.
Srivastava, V. C.
Powiązania:: https://bibliotekanauki.pl/articles/205058.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: phenol
resorcinol
catechol
batch reactor
BR
hydraulic retention time
biodegradation
Opis:: In the present study, treatment of synthetic wastewater containing phenol, resorcinol and catechol was studied in a sequencing batch reactor (SBR). Parameters such as hydraulic retention time (HRT) and filling time have been optimized to increase the phenol, resorcinol, catechol and chemical oxygen demand (COD) removal efficiencies. More than 99% phenol, 95% resorcinol and 96% catechol and 89% COD removal efficiency was obtained at optimum conditions of HRT = 1.25 d and fill time = 1.5 h. The heating value of the sludge was found to be 12 MJ/kg. The sludge can be combusted to recover its energy value.
Źródło:: Archives of Environmental Protection; 2013, 39, 2; 69-80
2083-4772
2083-4810
Pojawia się w:: Archives of Environmental Protection
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Fertility improvement in pea [Pisum sativum L.] autotetraploids - mutation breeding
Autorzy:: Kumar, H
Mercykuty, V.C.
Srivastava, C.P.
Powiązania:: https://bibliotekanauki.pl/articles/2048128.pdf
Data publikacji:: 1995
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: mutation breeding
micromutation
fertility improvement
autotetraploid
disjunction index
pea
Pisum sativum
seed
Opis:: C₂ seeds of autotetraploids (colchicine-induced) of two diverse genotypes, T 163 and 5064-S, of pea (Pisum sativum L.) and their corresponding diploids were irradiated with 10 kR gamma-ray. Autotetraploids showed a high seed-sterility as compared to diploids. Seed fertility increased in M₂ as compared to M₁. Both quadrivalent and bivalent frequencies decreased in the M₁ generation of autotetraploids in relation to their respective controls. However, a positive shift in the mean bivalent formation was noted at the cost of other configurations in C₃-M₂ with respect to C₂-M₁ and varied with the genotype. In the M₂ generation of autotetraploids, the variability was relatively higher for the number of pods per plant and seed yield per plant. Although the mean values for pods per plant, number of seeds per pod and seed yield per plant remained more or less parallel in autotetraploids in M₁ and M₂ generations, there was an increase in the upper range limit probably due to micromutation for these characters in M₂.
Źródło:: Journal of Applied Genetics; 1995, 36, 1; 43-48
1234-1983
Pojawia się w:: Journal of Applied Genetics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Economically viable synthesis of Fe3O4 nanoparticles and their characterization
Autorzy:: Srivastava, V.
Singh, P. K.
Weng, C. H.
Sharma, Y. C.
Powiązania:: https://bibliotekanauki.pl/articles/778707.pdf
Data publikacji:: 2011
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:: nanożelazo
żelazo
synteza
współstrącanie
charakterystyka
pH zpc
nano iron
synthesis
coprecipitation
characterization
Opis:: Nano iron oxide particles (Fe3O4) were synthesized by coprecipitation of Fe2+ and Fe3+ by ammonia solution in the aqueous phase. Various instrumentation methods such as X ray Diffractometry (XRD), Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) and Vibrating Sample Magnetometery (VSM) were used to characterize the properties of nanoparticles. The size of the nanoparticles was measured and was found to be between 10 to 15 nm. The value of saturation magnetization of the nanoparticles was found to be 55.26 emu/g. The BET surface area of nano iron oxide particles measured to be 86.55 m2/g.
Źródło:: Polish Journal of Chemical Technology; 2011, 13, 2; 1-5
1509-8117
1899-4741
Pojawia się w:: Polish Journal of Chemical Technology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Inverse Hall-Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon
Autorzy:: Mukhopadhyay, N.
Ali, F.
Scudino, S.
Samadi Khoshkhoo, M.
Stoica, M.
Srivastava, V.
Uhlenwinkel, V.
Vaughan, G.
Suryanarayana, C.
Eckert, J.
Powiązania:: https://bibliotekanauki.pl/articles/1373423.pdf
Data publikacji:: 2014-08
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 61.44.Br
Opis:: The structural and mechanical stability of quasicrystals are important issues due to their potential for possible applications at high temperatures and stresses. The aim of the present work is, therefore, to review the earlier works on conventional crystalline and quasicrystalline materials and also to report the results and the analysis on the Hall-Petch and inverse Hall-Petch like behavior of nanoquasicrystalline $Al_{62.5}Cu_{25}Fe_{12.5}$ alloys. It was observed that, at large grain sizes, the hardness increases with decreasing grain size, exhibiting the conventional Hall-Petch relationship, whereas for smaller grains, inverse Hall-Petch behavior was identified. The inverse Hall-Petch behavior in the nanoquasicrystalline phase could be attributed to thermally activated shearing of the grain boundaries, leading to grain boundary sliding in nanostructures of quasicrystalline grains. These results were analyzed based on the dislocation pile-up model as well as the grain boundary shearing models applicable to nanomaterials.
Źródło:: Acta Physica Polonica A; 2014, 126, 2; 543-548
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Srivastava, V. C." wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język