Temat: hardness distribution - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Influence of friction stir welding on hardness distribution in joints of AW-5083 alloy
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/241621.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FSW
welding
hardness distribution
5xxx aluminium alloy
shipbuilding
Opis:: The article presents the research results of hardness distribution of friction stir welded joint (FSW) of AW-5083 aluminium alloy. During the study used two types of tools: with cylindrical pin and with conical pin. FSW is a method of welding in the solid state, mechanical properties of joints welded by that method can be higher than that for arc welding techniques (MIG, TIG). The parameters of friction stir welding (FSW) used for joining 5083 alloy sheets were presented. Metallographic analysis of chosen joints showed the correct construction of structural bonded joints. The study was carried out using Vickers hardness HV1 in accordance with the requirements of the Polish Standard PN-EN 6507 using a hardness and microhardness-testing machine FM-800. The location of measurement points in the butt joint was determined in accordance with PN-EN 1043-1:2000. The indenter load was 9.8 N. In order to identify areas of particular characteristic of bonded joints macroscopic examination was performed using an optical microscope ZAISS AxioVert A1 MAT. The test specimens were polished and then etched with KELLER reagent. This enabled the precise identification of zones present in the joint, such as weld nugget, thermomechanically affected zone, native material. Hardness testing in across researched joints showed that the shape of the welding tool pin does not affect the mean value of hardness in the weld.
Źródło:: Journal of KONES; 2016, 23, 3; 101-106
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of welding parameters of FSW on hardness distribution in joints of AW-5083 alloy
Autorzy:: Dudzik, K.
Januszkiewicz, J.
Powiązania:: https://bibliotekanauki.pl/articles/242596.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FSW
welding
hardness distribution
5xxx aluminium alloy
shipbuilding
Opis:: The article presents the research results of hardness distribution of friction stir welded joint (FSW) of AW-5083 aluminium alloy. During the study used two types of tools: with cylindrical pin and with conical pin. FSW is a method of welding in the solid state, mechanical properties of joints welded by that method can be higher than that for arc welding techniques (MIG, TIG). The parameters of friction stir welding (FSW) used for joining 5083 alloy sheets were presented. Metallographic analysis of chosen joints showed the correct construction of structural bonded joints. The study was carried out using Vickers hardness HV1 in accordance with the requirements of the Polish Standard PN-EN 6507 using a hardness and microhardness-testing machine FM-800. The location of measurement points in the butt joint was determined in accordance with PN-EN 1043-1:2000. The indenter load was 9.8 N. In order to identify areas of particular characteristic of bonded joints macroscopic examination was performed using an optical microscope ZAISS AxioVert A1 MAT. The test specimens were polished and then etched with KELLER reagent. This enabled the precise identification of zones present in the joint, such as weld nugget, thermo-mechanically affected zone and native material. Hardness testing in across researched joints showed that the change of welding parameters in the range proposed in the research does not impact on the hardness distribution in the weld.
Źródło:: Journal of KONES; 2018, 25, 2; 105-112
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Influence of joining method for hardness distribution in joints of AlZnSMg1 alloy
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/247544.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding (FSW)
welding MIG
aluminium alloys
hardness distribution
Opis:: The article presents the research results of hardness values distribution of friction s tir welded joint (FSW) alloy AW 7020 (AlZn5Mg1). The joints welded by traditional MIG method of the same aluminium alloy were chosen as reference points. Friction stir welding (FSW) - a new technology can be successfully used for butt welding of sheet metal with different types of aluminium alloys. The parameters of friction stir welding (FSW) and MIG welding used to join metal alloy AlZn5Mg1 (7020) were presented. Metallographic analysis showed the correct structured both MIG welded joints and FSW welded aluminum alloy 7020. The study was carried out using Vickers hardness HV5 accordance with the requirements of the Polish Standard PN-EN 1043-1:2000. The study was conducted in three rows, and the indenter load was 50 N. In order to determine the structural changes in the bonded joints, the samples were polished and then micro-etched KELLER reagent. Metallographic examination was carried out using optical microscope Axiovert ZAISS 25. Metallographic examination revealed the existence of an explicit heat affected zone of HAZ in case of MIG welded joints and virtually lack there of, in case of FSW welded joints. In case of FSW welded joint, maximum hardness was observed in the middle of joint, but at a distance of approximately 25 mm from the middle of the weld there is a hardness decrease of about 10% relative to the base material. In the MIG weldedjoint lowest hardness of the weld occurred in the middle of the joint.
Źródło:: Journal of KONES; 2010, 17, 4; 137-141
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Reducing wear of piston rings using zero flow nitriding
Autorzy:: Kowalska, J.
Wróblewski, E.
Powiązania:: https://bibliotekanauki.pl/articles/243715.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: piston rings
controlled gas nitriding
nitrided layer
diffusion zone
hardness distribution
Opis:: This article presents new method of controlled gas nitriding called ZeroFlow, which is used for nitriding of internal combustion engine parts. Increasing efficiency of internal combustion engines means that engines are working under high thermal and mechanical loads, which is the unfavourable phenomenon – especially for elements of engine power train such as crankshaft or piston rings. Due to the high temperature and pressure in cylinder during combustion, piston rings are working under limit loads, which mean that lengthened fatigue life and wear resistant are of critical importance. Heat treatment is the most common way used for improving tribological properties of piston rings; one of the methods of heat treatment using in automotive industry, which meets with growing interest, is nitriding, especially controlled gas nitriding. The main aim of nitriding is to obtain layer with higher surface hardness, improved fatigue life and corrosion resistance, increased wear resistant and antigallic properties. According to that, this layer increase durability of nitrided parts, and as a result – durability of machines and vehicles. Steel nitriding using the ZeroFlow method allows precise forming of nitrided layers with respect to the phase structure, zone thicknesses and hardness distribution, which means that the ZeroFlow nitriding enable maintenance of full control over the kinetics of the nitrided layer growth. Kinetics of nitrided layer growth allows developing the especially dedicated process with specific parameters, which ensure obtaining on piston rings nitrided layer with strictly defined, required properties.
Źródło:: Journal of KONES; 2016, 23, 2; 193-199
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "hardness distribution" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język