Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "CNC machine" wg kryterium: Temat


Tytuł:
Dynamic Analysis of the Starting and Braking of the Table of CNC Machine Tool
Autorzy:
Józwik, Jerzy
Zawada-Michałowska, Magdalena
Moń, Damian
Powiązania:
https://bibliotekanauki.pl/articles/2201776.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dynamics analysis
vision systems
CNC machine tool
feed rate
CNC machine tools accuracy
CNC machine table
Opis:
The aim of the paper is a dynamic analysis of the starting and braking of the table of a numerically controlled CNC machine tool during idle motion. The experimental test was performed on the vertical table of the FV580A machining centre using the Phantom v1610 high-speed vision camera. The dynamics characteristics of the table movement were registered and the dynamics estimates of the movement were determined. The influence estimation of the parameters of the machine tool table motion on the value of the determined estimates was made. The results of measurements were discussed and guidelines and in order to minimise disturbances were formulated. The test results were summarised and discussed in the form of charts and tables. The directions of further research in the discussed subject area were also defined
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 3; 34--46
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Requirement of New, Effective Educational Programs – Necessity for Future Development of Society
Autorzy:
Kováčik, Peter
Powiązania:
https://bibliotekanauki.pl/articles/2042829.pdf
Data publikacji:
2020-11-05
Wydawca:
Uniwersytet Rzeszowski
Tematy:
education
CNC machine
software
complexity
Opis:
The article analyses demands of new concepts of student education on the level of secondary schools with technical focus. It urges the necessity to create new educational programs that prepare new future technical operators towards requirements of the labour market in future years in harmony with specifications of Industry 4.0. Many of job specializations is possible, at present time, to estimate only as a frame, but considering a length of study it is necessary to realize predictions at sphere of education needs consistently, expertly and continuously to introduce their results into innovations of existing educational programs or to introduce completely new, perspective educational programs by needs rising at production sector.
Źródło:
Journal of Education, Technology and Computer Science; 2020, 11, 1(31); 79-85
2719-6550
Pojawia się w:
Journal of Education, Technology and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Comparative Analysis of the Impact of CNC Miller Programming on Machining Effects
Autorzy:
Kuczmaszewski, J.
Pieśko, P.
Zawada-Michałowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2064953.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
programming
CAM
CNC machine tool
Opis:
This paper presents a comparison of the impact of the programming methods of a CNC miller on the machining effects. As a part of the study, the test samples were made of the EN AW-2024 aluminium alloy. The CNC machining programs compared were developed with two programming methods: by inputting the CNC machining program directly from the CNC miller's control panel (machine level programming) and in a CAM software environment (CAM programming). The machining effect indicators adopted included: machining time, surface quality, and dimensional deviation of specific geometrical features. A measurement of the machining times revealed than the CAM programming reduced the machining time up to 20% from the machining time of the machine level programming. A conclusion stands valid that CNC machining programs developed in the CAM software environment are more efficient than CNC programming directly with the CNC miller control panel, most likely due to the machining path optimisation in CAM. In addition, given the experimental test results, it was found that smaller machined errors were also obtained for CAM programming. To conclude, the comparative analysis revealed that CAM programming provided better machining results than the machine level programming.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 161--167
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research and development of laser engraving and material cutting machine from 3D printer
Autorzy:
Durna, Antonin
Fries, Jiri
Hrabovsky, Leopold
Sliva, Ales
Zarnovsky, Jozef
Powiązania:
https://bibliotekanauki.pl/articles/410205.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
3D printer
CNC machine
engraving
laser
Opis:
This article deals with the adjustment of a 3D printer for laser engraving and material cutting. The print head can be fitted with a solid laser diode module, which achieves a compact size while retaining its useful power. Two paths lead to the use of such a concept. It is possible to equip the existing print head with a module, which also brings a number of disadvantages such as, for example, the reduction of the printing space or the need for a suitable mounting design. A more elegant solution is to consider this in the design of a 3D printer and design a system to exchange the print heads for 3D printing and laser engraving. Such a solution allows full utilization of the workspace and simple installation of the effector for the required type of work. According to the installed power of the laser diode, it is possible not only to engrave but also cut material such as thin wood, veneer or acrylic glass. The use of such a machine is not only for graphic elements but for the creation of various stencils, boxes or simple models, which can be made up of plastic-burning pieces. The laser module is controlled by a driver, which is designed for the device. This is connected to a 3D printer control board. It is, therefore, necessary for the control board to have at least two pins, which can be controlled after adjusting the control firmware. Most laser modules are normally equipped with an adjustable lens, which is used to concentrate the focus of a laser for the given distance against the worktop. Thus, the modified 3D printer can perform its function as a multi-purpose CNC machine, while a basic platform similar for both devices is used.
Źródło:
Management Systems in Production Engineering; 2020, 1 (28); 47-52
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Data processing from the measuring device Ballbar QC20
Autorzy:
Košinár, M.
Kuric, I.
Powiązania:
https://bibliotekanauki.pl/articles/102949.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
data processing
measurement device
CNC machine tools
Opis:
The paper presents an innovative method of data processing from the measurement device – Ballbar QC20W. It was created with a program for data transformation (Visual Basic.NET) and it used Fourier transformation. The paper deals with the measuring method of CNC machine tools using Ballbar QC20W. There is an influence between qualitative parameters of machine tools and qualitative parameters of products (tolerances, roughness, etc.). It is very important to hold the stability of qualitative parameters of products as a key factor of production quality. Therefore, is also important to evaluate the accuracy of machine tools and make prediction of possible accuracy.
Źródło:
Advances in Science and Technology. Research Journal; 2014, 8, 21; 9-12
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Linear positioning errors of 3-axis machine tool
Autorzy:
Józwik, J.
Mazurek, P.
Wieczorek, M.
Czwarnowski, M
Powiązania:
https://bibliotekanauki.pl/articles/118243.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
CNC machine tool
diagnostic systems
positioning error
Opis:
This paper presents results of 3-axis CNC machine tool diagnostics performed with XL-80 laser interferometer and XC-80 environmental compensation unit, including pressure, humidity and temperature sensors. Furthermore, the paper includes the methodology and results of conducted measurements of linear positioning errors, which supplied data for further analysis. The conclusion section presents important results of conducted experiments. Measurement results were presented in figures, charts and tables.
Źródło:
Applied Computer Science; 2015, 11, 2; 86-94
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Increasing the elasticity of multitasking machining using tooling for tools and workpiece clamping in a CNC machine tool
Autorzy:
Mazurek, L.
Taranenko, V.
Świć, A.
Taranenko, G.
Powiązania:
https://bibliotekanauki.pl/articles/117657.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
workpiece
tool
fastening
CNC machine tool
table
Opis:
The article presents rules for designing a device for fastening tools and machined parts to a CNC machine tool. Suggested tooling was used on machine tools already working in machining industry. Those machine tools can be elements of Flexible Production Systems. Presented solutions facilitate the application of CNC machine tools in low-volume and piece production.
Źródło:
Applied Computer Science; 2008, 4, 2; 103-116
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie systemu MTS do projektowania technologii obróbki wału maszynowego
Usage of the MTS system to designing of the treatment technology of machine shaft
Autorzy:
Latała, D.
Mądziel, M.
Powiązania:
https://bibliotekanauki.pl/articles/311339.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
system MTS
maszyna CNC
wał maszynowy
MTS system
CNC machine
machine shaft
Opis:
W artykule porównano technologie wykonania wałka wielostopniowego z wykorzystaniem obrabiarek konwencjonalnych oraz maszyn CNC. Do symulacji pracy maszyn CNC wykorzystany został system MTS. Właściwa część artykułu przedstawia obróbkę wału maszynowego w systemie MTS w trzech zamocowaniach. Zestawiając opisane technologie wykonania badanego wałka wielostopniowego, stwierdzić można, że mniej czasochłonny, a tym samym korzystniejszy jest proces wytworzenia wałka na maszynach CNC.
The article compares the technologies of the multistage shaft creating with the usage of conventional machine tools and CNC machines. To simulate the work of CNC machines the MTS system was used. The relevant part of the article presents the treatment of the machine shaft in the MTS system in three anchorages. Comparing described technologies of the creating of multi-stage shaft, it can be stated that less time consuming and easier is to produce the shaft on CNC machines.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 6; 859-865, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological setups of the Gleason Phoenix CNC spiral bevel and hypoid gear milling machines
Nastawy technologiczne frezarek Gleason Phoenix CNC do obróbki kół stożkowych i hipoidalnych o kołowo-łukowej linii zęba
Autorzy:
Skawiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/175695.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
koło zębate stożkowe
obrabiarka CNC
frezarka CNC
ustawienia obrabiarki
spiral bevel gear
CNC machine tool
CNC milling machine
machine tool setup
Opis:
The paper contains the description of basic technological setups for conventional milling machines and for 6-axes CNC machines for Gleason spiral bevel and hypoid gears. Cartesian reference system are discussed for Gleason's series Phoenix CNC machines. Numerically controlled machines allow cut and grind the generated and formate spiral and hypoid bevel gears in all technological methods.
W opracowaniu przedstawiono podstawowe nastawy technologiczne frezarek konwencjonalnych oraz 6-osiowych obrabiarek CNC stosowanych do obróbki kół zębatych stożkowych i hipoidalnych kołowo-łukowych według metody Gleasona. Podstawą opracowania nastaw jest kinematyka obrabiarek CNC firmy Gleason serii Phoenix. Wykazano, że obrabiarki sterowane numerycznie pozwalają na skrawanie i szlifowanie generowanych numerycznie i kształtowanych kół stożkowych i hipoidalnych o kołowo-łukowej linii zęba przy użyciu wszystkich metod technologicznych obróbki.
Źródło:
Advances in Manufacturing Science and Technology; 2012, 36, 4; 33-43
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Serial control of CNC machines
Autorzy:
Kowalski, P.
Smyk, R.
Powiązania:
https://bibliotekanauki.pl/articles/97515.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
CNC machine
serial control
stepper motors
serial communication
Opis:
In this paper a new method of the serial control of CNC machines is proposed. Actuators are controlled locally and the role of the central computer is limited to sending commands to the controller instead of sending it directly to actuators. It has been achieved with the use of the serial protocol with the use of the USB port. The taken approach leads to more reliable operation because commands are buffered and no synchronization between command stream and actuators operation is needed.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 245-255
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of universal cnc machine tool for spur gears manufacturing
Autorzy:
Skoczylas, L.
Tomczewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/103017.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
spur gear
CNC machine
CAD/CAM software
roughness
Opis:
The article introduces two variants of making spur gears by using universal CNC machine tools with universal shank cutter. The measurement of the chosen parameters of geometric structures of gear tooth surface were carried out as well as their comparison was made.
Źródło:
Advances in Science and Technology. Research Journal; 2013, 7, 19; 75-78
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Angular positioning accuracy of rotary table and repeatability of five-axis machining centre dmu 65 monoblock
Autorzy:
Józwik, J.
Czwarnowski, M
Powiązania:
https://bibliotekanauki.pl/articles/103390.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
positioning
diagnostics
accuracy
CNC machine tool
laser interferometer
Opis:
The study aims to evaluate angular positioning accuracy and repeatability of DMU 65 monoBLOCK numerically controlled machine tool. The measurements were carried out with XL-80 Laser Interferometer with XR20-W attachment. The measurements were conducted according to the standard PN-ISO230-2. Test methodology and measurement results analysis are presented in a form of figures and tables. The final part presents conclusions from the analysis.
Źródło:
Advances in Science and Technology. Research Journal; 2015, 9, 28; 89-95
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitoring of the Noise Emitted by Machine Tools in Industrial Conditions
Autorzy:
Józwik, J.
Wac-Włodarczyk, A.
Michałowska, J.
Kłoczko, M.
Powiązania:
https://bibliotekanauki.pl/articles/123074.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
noise monitoring
measurement
sound pressure
CNC machine tools
Opis:
The paper presents an analysis of noise emitted by selected machine tools in a production hall (under industrial conditions). Noise monitoring is a fundamental task for maintaining workplaces which are safe and healthy. This paper presents the noise measurements obtained for several machine tools, performed in accordance with the PN ISO 230–5:2002 standard. The identification of noise sources and levels was conducted by means of the UNIT 352 measurement system for DMU 50, BGO-CNC/RV/R, FU 251, FW 801, FWC 25/H. Detection of noise sources in the tested machine tools allows to maintain safety of workers and effective means of noise reduction, which are highly significant from the perspective of minimising noise at various workstations. The method of performing noise measurements at workstations using specific machines is normalised, so that the results of such measurements for different machines could be compared. The test results were presented in the form of diagrams and tables. The results of the tests are concluded by a detailed recommendation for the CNC machine tool operators to use hearing protection when at work. The results showed that the level of noise at the operator’s workstation significantly exceeds the standard at certain machining parameters.
Źródło:
Journal of Ecological Engineering; 2018, 19, 1; 83-93
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podstawowe charakterystyki sensorów
Autorzy:
Skoczyński, Wacław
Powiązania:
https://bibliotekanauki.pl/articles/302627.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo Druk-Art
Tematy:
sensor
obrabiarka CNC
układ wzmacniający
CNC machine tool
strengthening system
Opis:
Systemy pomiarowe w urządzeniach wytwórczych wykorzystują różne czujniki i elementy wykonawcze do pomiaru i manipulowania układami mechanicznymi. Czujniki mają wiele cech, które wpływają na ich możliwości pomiarowe oraz ich przydatność dla konkretnej aplikacji. W czujnikach analogowych każdej wartości z zakresu zmian mierzonego parametru odpowiada określony sygnał wyjściowy, zmieniający się w sposób ciągły w zależności od zmian parametru wejściowego. Przykładem czujników analogowych są potencjometry, transformatorowe czujniki przemieszczeń liniowych o układzie różnicowym LVDT (ang. Linear Variable Differential Transformer) z przesuwanym rdzeniem, piezoelektryczne przetworniki siły i termistory.
Źródło:
Napędy i Sterowanie; 2019, 21, 6; 96-105
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification and monitoring of noise sources of CNC machine tools by acoustic holography methods
Autorzy:
Józwik, J.
Powiązania:
https://bibliotekanauki.pl/articles/102033.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
noise
acoustic holography
monitoring
CNC machine tools
machining
Opis:
The paper presents the analysis of sound field emitted by selected CNC machine tools. The identification of noise sources and level was measured by acoustic holography for the 3-axis DMC 635eco machine tool and the 5-axis vertical machining centre DMU 65 monoBlock. The acoustic holography method allows precise identification and measurement of noise sources at different bandwidths of frequency. Detection of noise sources in tested objects allows diagnosis of their technical condition, as well as choice of effective means of noise reduction, which is highly significant from the perspective of minimising noise at the CNC machine operator workstation. Test results were presented as acoustic maps in various frequency ranges. Noise sources of the machine tool itself were identified, as well as the range of noise influence and the most frequent places of reflections and their span. The results of measurements were presented in figures and diagrams.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 30; 127-137
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies