Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Krasoń, W." wg kryterium: Autor


Tytuł:
Experimental investigations of double multi - leaf spring subjected to impact load
Autorzy:
Bogusz, P.
Krasoń, W.
Wysocki, J.
Powiązania:
https://bibliotekanauki.pl/articles/247312.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
double multi-leaf spring
suspension of a motor truck
impact load
experimental investigations
Opis:
The article deals with experimental investigations of a prototype double multi-leaf spring, compound of a fourleaf main spring and a double-leaf supporting spring subjected to an impact test. In real conditions of car movement (e.g. curb, bump), dynamic oscillating loads, which generate dynamic stress in a car suspension affecting other elements of the car, occur. Consequently, effects of coupled oscillations having a great impact on comfort of a driver and passengers can be observed. The research was conducted in the Laboratory of Material and Construction Strength Department of Mechanics and Applied Computer Science (DMACS) in the Faculty of Mechanical Engineering of Military University of Technology. The experiment was carried out on an original construction of a spring impact hammer developed in DMACS. Energy of the impact was set up by changing mass of a beam with beater and beam dropping height. The results were presented in the form of table summaries, time-dependent load and displacement graphs. The methodology of the research presented in the paper and a set of measuring equipment can be utilized to evaluate load and vibrations of any multi-leaf spring under impact load with given energy. The experimental results obtained from the test are supposed to be used to verify and develop FEM model describing a spring under impact load and oscillations.
Źródło:
Journal of KONES; 2012, 19, 2; 45-51
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental tests on the friction coefficient between the leaves of the multi-leaf spring considering a condition of the friction surfaces
Badania eksperymentalne współczynnika tarcia pomiędzy piórami resoru wielopiórowego z uwzględnieniem stanu powierzchni ciernych
Autorzy:
Hryciów, Z.
Krasoń, W.
Wysocki, J.
Powiązania:
https://bibliotekanauki.pl/articles/1365356.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
multi-leaf spring
laboratory tests
friction pairs
surface roughness
friction forces
static friction coefficients
kinetic friction coefficients
resor wielopiórowy
badania laboratoryjne
pary cierne
chropowatość powierzchni
siły tarcia
statyczny współczynnik tarcia
kinetyczny współczynnik tarcia
Opis:
In this study are presented the results of the simulation tests of the friction pairs occurring between the spring leaves while considering a condition of the mating surfaces and an impact of the velocity of their mutual dislocation on the values of the friction coefficients. It has been proposed a methodology in respect of a determination of the coefficients of the static and kinetic friction. Two kinds of the specimens have been prepared for the tests, which have been cut out from a spring leaf of the prototype spring – they have created the model friction pairs. The condition of the specimen surface and their selected mechanical properties have been evaluated. During the experimental tests have been considered: four sliding velocities, four variants of the surface conditions and two values of the normal load. The tests of the friction pairs have been performed at the laboratory stand for measuring the friction force. The results of the tests have been presented in a form of the time courses of friction force, graphs and tabular summaries of the friction coefficients. It has been conducted a comparative analysis of the results in order to determine an influence of the test results on the values of the determined friction coefficients. The proposed research conditions are approximate to the typical operating conditions of the road vehicles.
W pracy przedstawiono wyniki badań symulacyjnych węzłów tarcia występujących pomiędzy piórami resoru, z uwzględnieniem stanu powierzchni współpracujących oraz wpływu prędkości ich wzajemnego przemieszczania, na wartości współczynników tarcia. Zaproponowano metodykę wyznaczania współczynników statycznych i kinetycznych tarcia. Do badań przygotowano dwa rodzaje próbek, które wycięto z pióra resoru prototypowego - tworzyły one modelowe pary cierne. Oceniono stan powierzchni próbek i wybrane właściwości mechaniczne. W badaniach eksperymentalnych uwzględniono: cztery prędkości poślizgu, cztery warianty stanu powierzchni oraz dwie wartości obciążenia normalnego. Badania par ciernych wykonano na stanowisku laboratoryjnym do pomiaru siły tarcia. Wyniki badań przedstawiono w postaci przebiegów czasowych siły tarcia, wykresów i zestawień tabelarycznych współczynników tarcia. Wykonano analizę porównawczą wyników w celu określenia wpływu warunków badań, na wartości wyznaczonych współczynników tarcia. Zaproponowane warunki badań są zbliżone do typowych warunków eksploatacyjnych pojazdów drogowych.
Źródło:
Eksploatacja i Niezawodność; 2018, 20, 4; 682-688
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical tests of separated side lock of intermodal wagon
Autorzy:
Barnat, W.
Krasoń, W.
Bogusz, P.
Stankiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/246770.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
intermodal transport
railway wagon
strength test
FE analysis
Aramis
experiment
Opis:
The object of the paper is to investigate the strenght of a separated subsystem of a wagon for transport of trucks semitrailers. The wagon designed in the Department of Mechanics and Applied Computer Science, Military University of Technology, allows easy and independent loading, transport and unloading without any special equipment or additional platform infrastructure. It is possible to utilize it for transport of various vehicles types such as tractors, cars, semitrailers, containers, heavy equipment. The tests presented in the paper concern a wagon separated construction element – a side lock. It is a key subsystem of the platform allowing transfer of its loads generated in the transport position (a wagon ready to go) to the form of longitudinal forces operating in the sides of the structure. The locks are simultaneously the most strained parts of the wagon. There were carried out the numerical analyses and experimental studies of a single lock were carried out. Owing to the application of Aramis non-contact optical system of strains measurement, the lock deformations as well as the areas of the minimum and maximum main deformations were defined.
Źródło:
Journal of KONES; 2014, 21, 1; 15-22
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected aspects of simulation of multi - module mechanisms with the use of multibody method
Autorzy:
Krasoń, W.
Kozłowski, R.
Derewońko, A.
Golczak, K.
Powiązania:
https://bibliotekanauki.pl/articles/247966.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bridges
simulation of multi-component mechanism
rigid models
multibody numerical analysis
Opis:
The paper presents numerical analysis of a single segment of a floating bridge built in the form of a metal cassette with a movable bottom. An internal elastic container - a pontoon filled with the air was fixed in the cassette [4]. It enables a fluent change of displacement of a single segment and of a floating ribbon assembled from segments. A multibody analysis of cooperation of the cassette in the process of filling the pontoon and opening the cassette was discussed. Numerical analysis of a single cassette presented in the paper constitutes a part of tests including stand tests. The single floating cassette has a typical shelled construction consists of a tight deck, a pneumatic chamber closed with a reinforced movable bottom and sets of fastenings together with a mechanism of bottom opening. Each cassette is equipped with a highly resistant elastic or semi-elastic cushion hereinafter called a pontoon. The movement of the bottom and the process of opening the cassette module with a pneumatic air cushion realized under an influence of pressure of the compressed air. As a result of uneven filling the individual chamber of the pontoon with the air or their uneven emptying in the process of closing the cassette, there can occur the asymmetry of displacements of the bottom resulted even in seizing of telescopic mechanisms. In the paper were considered the cases of symmetrical and asymmetrical movement of the bottom corresponding to symmetrical and unsymmetrical pull out of the telescopic mechanism modules. Dynamical analysis of movement of cooperating subsystems of the floating cassette was carried out with the use of MSC.Adams code [5, 8].
Źródło:
Journal of KONES; 2012, 19, 1; 207-214
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The overview of construction and selected aspects of testing mounting frames of aircraft machine guns
Autorzy:
Abratowski, P.
Krasoń, W.
Barnat, W.
Gnarowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/348159.pdf
Data publikacji:
2017
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
mounting frames of aircraft machine guns
experimental research
FEM analysis
Opis:
The installation of a machine gun on board a helicopter requires designing the rigid and durable frame for mounting a machine gun. Additionally there should be considered the limit to the weight of the structure, which forces the payload of a helicopter. The paper presents the overview of frames for mounting firing positions as well as selected cases of strength tests. In most of them the attention in the description was paid to the frames created through the cooperation of the Institute of Aviation and Military Aviation Plant No. 1 in Łódź. The aspects of research on firing positions on the example of a selected frame are also discussed. Furthermore, there is presented the prototype of the mounting frame WLKM (multi-barreled aircraft machine gun) designed by the Institute of Aviation (in the co-operation with Zaklady Mechaniczne Tarnów) with some chosen results of the FEM analyses.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2017, 1; 155-172
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania numeryczne mechanizmu obrotu nadwozia wagonu platformy kolejowej do przewozu samochodów ciężarowych
Numerical research of the body turning mechanism of a lorry carrying flat floor wagon
Autorzy:
Sławiński, G.
Krasoń, W.
Niezgoda, T.
Barnat, W.
Powiązania:
https://bibliotekanauki.pl/articles/215130.pdf
Data publikacji:
2011
Wydawca:
Instytut Kolejnictwa
Tematy:
obrotowa platforma kolejowa
transport kombinowany
body turning mechanism
combined transport
Opis:
Transport kombinowany, który coraz częściej zajmuje priorytetowe miejsce w krajach członkowskich Unii Europejskiej, stwarza możliwość zbudowania zrównoważonego systemu komunikacyjnego. W Europie stanowi on 10.15%, w Polsce zaledwie zaś 1,5% ogólnych przewozów kolejowych. Prognoza przewiduje, że w 2013 roku udział transportu kombinowanego w przewozach kolejowych w Polsce wzrośnie do 6%. W artykule przedstawiono analizy numeryczne płaskiej i nisko umieszczonej platformy obrotowej wagonu kolejowego służącego do transportu różnego typu pojazdów, takich jak ciągniki, ciężarówki, przyczepy, naczepy i kontenery. Wagon taki umożliwia szybki i wygodny załadunek i rozładunek pojazdów (bez urządzeń dźwigowych), samozaładunek i rozładunek bez terminali i specjalnego zabezpieczenia logistycznego, wymagany jest tylko utwardzony peron bez dodatkowej infrastruktury; każdy wagon może być załadowany - rozładowany oddzielnie.
Intermodal or combined transport, that is more and more often given priority in the EU countries, provides a possibility to construct balanced system of transport services. From all transport services transport of this type constitutes 10 - 15 pct in Europe while only 1.5 pct in Poland. According to a forecast, combined transport in Poland will reach 6 pct share in the entire rail transport in 2013. The paper presents numerical analysis of the low and flat turning floor for rail cars designed for transport of various road vehicles, such as truck-tractors, trailers, semi-trailers, and containers. Such car allows fast and convenient loading and unloading of transported vehicles (without the use of lifting equipment), self- loading and unloading with no need to use any terminals or specialized logistics. What is only needed is paved platform without any additional infrastructure. Each wagon may be loaded and unloaded individually.
Źródło:
Problemy Kolejnictwa; 2011, 153; 137-146
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane aspekty weryfikacji modelu 3D do badań dynamiki podwozia głównego
Chosen aspects of 3D model validation for dynamic tests of main landing gear
Autorzy:
Krasoń, W.
Małachowski, J.
Jachimowicz, J.
Kajka, R.
Powiązania:
https://bibliotekanauki.pl/articles/386883.pdf
Data publikacji:
2008
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
podwozie główne
dynamika
model 3D
main landing gear
dynamic
3D model
Opis:
Podwozia lotnicze ze względu na złożoność konstrukcji, zmienność warunków pracy, różnorodność zjawisk towarzyszących ich eksploatacji i jednocześnie występowanie ekstremalnych obciążeń, badane są najczęściej na modelach uproszczonych. W pracy zaproponowano model odkształcalny 3D kompletnego układu podwozia głównego, który docelowo zastosowany będzie do analizy wpływu postępującego procesu zniszczenia jednego elementu na wytężenie kompletnego podwozia. Rezultaty otrzymane z przeprowadzonej symulacji pokazały jak bardzo efektywna jest analiza z zastosowaniem zbudowanego modelu 3D kompletnego układu podwozia i jak istotne zagadnienia są rozwiązywane metodą symulacji numerycznej tj. problem nieliniowości geometrycznych i materiałowych, zagadnienie kontaktu pomiędzy współpracującymi elementami, zbadanie kinematyki podwozia oraz zbadanie problemu dyssypacji energii w całym układzie.
Results gained from the simulation have proved how effective the 3D numerical model is and how many problems can be solved in the course of only one numerical run, e.g. the geometric and material non-linearities, the question of contact between mating components, investigation into kinematics of the landing gear and the checking of possible failure influence on the structure behaviour, which can appear in some elements due to overload. The major advantage of the presented numerical method is applicability thereof to landing gear examination with artificially introduced flaws, what is impossible to be performed with other methods, including experimental testing work.
Źródło:
Acta Mechanica et Automatica; 2008, 2, 1; 57-62
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some selected examples of fem modelling of structure-affecting material and manufacturing faults
Autorzy:
Jachimowicz, J.
Małachowski, J.
Krasoń, W.
Kajka, R.
Powiązania:
https://bibliotekanauki.pl/articles/243333.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
FEM modelling
combustion engine
landing gear
imperfection
Opis:
In design practice, in most of cases, stresses and deformations of structures with nominal dimensions and average material properties were analyzed. It have been concluded that such procedure is most often sufficient. However, there are design solutions, especially in high-effort structures for example aircraft and turbine engines, where scatter of geometrical dimensions consistent with assumed tolerances cause significant scatter of stresses and strains, differ from values coming from nominal dimensions. Scatter of these values have essential influence on service life of presented structures. Example of such effect is described in the paper. There were used FEM analyses to determination of scatter of stresses and stres s concentration coefficient in herringbone lock joint of K-15 engine's turbine. Another example of fault impact on stresses in structure is analysis of undercarriage element with material fault. Both these examples indicate on great sensitivity of stress distribution on manufacturing imperfections. The impact of these faults and imperfections reaches hundreds of per cent, and in some cases could be serious menace of operating safety. In structures with the multiple 3D stress state, non-linear geometric and material phenomena, with contact between friction-affected elements, any geometric imperfections can cause considerable local changes in the stress and strain.
Źródło:
Journal of KONES; 2008, 15, 1; 97-107
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi - body simulations of railway wagon dynamics
Autorzy:
Wójcik, K.
Małachowski, J.
Baranowski, P.
Mazurkiewicz, Ł.
Damaziak, K.
Krasoń, W.
Powiązania:
https://bibliotekanauki.pl/articles/246886.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
multi-body
MSC ADAMS
railway wagon
dynamics
Opis:
The main aim of the presented paper is to verify the dynamics of chosen railway wagon using multi-body methods. Thus, in tests a wagon prototype with rotational rail-car body was simulated, which is going to be used for TIR vehicles trailer bodies transporting. Implemented prototype is authored by the team from Department of Applied Mechanics and Computer Science from Faculty of Mechanical Engineering in Military University of Technology. For this purpose CAD model, and subsequently numerical model, of mentioned wagon was developed. Using MSC Adams software initial boundary conditions, material parameters and contact characteristics were defined. In the previous authors' paper [1], preliminary analyses of the loads acting on the railway platform were carried out, which verified chosen parameters and coefficients. The main aim of presently proposed 3D multi-body simulations of railway wagon is to investigate its motion with full load and to determine the operation limit safety. Thus, in the performed analyses the railway wagon was accelerated to the desired velocity and drove through the curved tracks with four different velocities. From the carried out simulations the wagon dynamic behaviour was investigated and obtained results including contact forces characteristics were compared from all analyses cases. Moreover, performed study shows that the MSC. Adams software is capable for analysing and simultaneously validating various complex engineering problems, such as the one investigated by the authors.
Źródło:
Journal of KONES; 2012, 19, 3; 499-506
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wytwarzanie struktury nanokrystalicznej w warstwach wierzchnich stali po nawęglaniu próżniowym
Formation of a nanocrystalline structure in the surface layer of vacuum carburised steel
Autorzy:
Wasiak, K.
Wasiluk, K.
Skołek, E.
Świątnicki, W.
Szawłowski, J.
Sut, M.
Korecki, M.
Krasoń, M.
Bazel, M.
Powiązania:
https://bibliotekanauki.pl/articles/970829.pdf
Data publikacji:
2013
Wydawca:
AXIS MEDIA
Tematy:
struktura nanokrystaliczna
wytwarzanie
warstwa wierzchnia stali
nawęglanie próżniowe
obróbka cieplna
metodyka badań
Opis:
W wyniku poddania stali niskowęglowych, procesowi nawęglania, hartowania i niskiego odpuszczania powstają znaczne naprężenia własne mogące doprowadzić nawet do pęknięcia materiału. W artykule przedstawiono badania mające na celu opracowanie takiej obróbki cieplnej, która zapewni uzyskanie pożądanych właściwości stali i zredukuje to niekorzystne zjawisko.
By subjecting a low carbon steel to carburisation, hardening, and low temperature tempering, a high level of residual stress is produced, which can result even in cracking of the material. The article discusses research aimed at developing a heat treatment method that would allow for achieving the desired steel properties while minimising the adverse effects.
Źródło:
Piece Przemysłowe & Kotły; 2013, 11-12; 16-21
2082-9833
Pojawia się w:
Piece Przemysłowe & Kotły
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies