Temat: Diesel engine - Katalog OPAC zbiorów

Skocz do pozycji: 16.

Tytuł:: The analysis of influence of fuel spray angle on NOx fraction in the exhaust gas from marine 4-stroke diesel engine
Autorzy:: Kowalski, J.
Powiązania:: https://bibliotekanauki.pl/articles/246120.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
NOx fraction
spray angle
CFD model
Opis:: The manuscript presents the analysis of influence of fuel spray angle on NOx fraction in the exhaust gas emitted from marine 4-stroke diesel engine. Analysis is based on computational fluid dynamic (CFD) model designed because of the motion mesh of combustion chamber of the marine engine cylinder and air inlet and exhaust gas ducts. Presented model consists of models of fuel injection into combustion chamber, breaking-up and evaporation of the fuel, mixing with air and turbulent combustion with heat transfer to construction elements of the engine cylinder. Mentioned CFD model is validated according to boundary and initial conditions taken from direct measurements. The chosen research object is laboratory 4-stroke turbocharged Diesel engine with direct injection of the fuel and mechanically controlled of both cylinder valves and the injector. The conclusion from the analysis is that the increase of fuel spray angle causes the increase of maximum speed of kinetic phase of the combustion and the decrease of maximum speed of diffusion phase of the combustion. The effect of this is the increase of maximum combustion pressure and the decrease of maximum combustion temperature. The result of presented changes in combustion process is the increase of NOx fraction in the exhaust gas. It should be noted that extended increase of the fuel spray angle cause close-up the fuel spray to the cylinder heads wall and the decrease of NOx fraction in the exhaust gas.
Źródło:: Journal of KONES; 2015, 22, 3; 309-316
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 17.

Tytuł:: Tuning method for high-speed marine diesel engine MB820 Type
Autorzy:: Lus, T.
Powiązania:: https://bibliotekanauki.pl/articles/246964.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
diagnostics
tuning
fuel injector
valve gear
Opis:: Checking and tuning of the fuel injection valves opening pressures, fuel valves timing and exhaust or inlet valves clearances is a common practice in high-speed marine diesel engines maintenance. Cost lowering tendency in engine maintenance schedules and unmanned vessel's propulsion plants need new approach to these old and reliable procedures. Conventional maintenance methods for engine valve gear mechanism depend on valve clearances checks between valve stem and rocker arm and valve timing diagram checks on crankshaft flywheel. But how to observe valves' timing diagram on working engine and what is the difference between static and dynamic valves timing diagram and in the end how engine load and speed changes disturb observed parameters? Answers for these and other questions for high-speed marine diesel engines MB820 type are given in this paper. Dynamic valve gear timing diagrams are indispensable to perform an accurate engine tuning. A new original diagnostic and tuning method for high-speed marine diesel engine MB820 is presented in the paper. In the principle this method based on measurements of: internal cylinder pressure curves and on vibration signals. Typical diagnostic methods which based on vibration signals analysis are sensitive to engine load and speed changes. Researches presented in this paper were focused on the possibilities and differences of the dynamic timing diagram assessing at engine rated load and when idling.
Źródło:: Journal of KONES; 2010, 17, 2; 277-284
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 18.

Tytuł:: Emission inventory of exhaust gases from oil - fired ship boilers
Autorzy:: Myśków, J.
Borkowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/242902.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ship
oil-fired boiler
marine diesel engine
exhausts emission
Opis:: Regulations concerning the limitation of harmful compounds emission contained in exhaust gases become more restrictive. This is observed within regulations regarding land-based installations and also rules applied to ships of global trade fleet. Other restrictions of vessels emissions, enclosed in rules set out in Annex IV of Marpol Convention 73/78 are gradually implemented and establish emission limits for ship engines. The boiler delivers the heat energy required for fuel preparation for main and auxiliary engines - and also by consuming fuel in its combustion chamber becomes and emitter. This article describes the anticipated methodology of the boiler steam efficiency, depending on the main engine installed. Additionally, fuel oil consumption analysis in various steam capacity range performed using the histograms. The histograms were produced on the basis of service reports of similar units, and combining fuel oil consumption with exhaust emission during operation. A vessel engine report includes monthly machinery abstract and is compiled for a ship-owner on the basis of the log book records. Quantified exhaust emission from auxiliary oil fired boiler contributes determination the overall emissions from a ship.
Źródło:: Journal of KONES; 2012, 19, 4; 487-494
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 19.

Tytuł:: Marine diesel engine combustion influenced by injection nozzle and primary fuel atomization
Autorzy:: Borkowski, T.
Powiązania:: https://bibliotekanauki.pl/articles/243157.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
injection assembly
combustion and injection modelling
Opis:: In recent years modelling has been applied to investigation of mixture formation, fluid flow, combustion process and pollutant formation in diesel engines. In this study numerical simulation was carried out to investigate the effect of fuel spray characteristics in marine medium speed diesel engine - Sulzer 6A20/24D. 1-D and 3-D CFD fuel spray model was adopted for simulation of atomization and combustion process. For comparison purposes modelling outcome was set against experimental tests results. Operational validation of injection assembly model was performed according to standard marine engine test cycles. Injection pressure history for full load range of the engine has been experimentally established. Fuel oil supply system, test engine cylinder experimental setup, 1-D engine fuel injection assembly model and geometry of cam profile, measured nominal injection duration, comparison of calculated and measured injection pressures, calculated nominal injection process components shape, the cross section of velocity flow field for nominal injection phase and for nominal injection phase, the cross sections of velocity flow field in hole channel for nominal injection phase after cut-off and for nominal injection phase after cut-of, the cavitation-induced spray formation process in modelled combustion chamber are presented in the paper.
Źródło:: Journal of KONES; 2007, 14, 2; 45-54
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 20.

Tytuł:: Study on optimization simulation of SCR denitration system for marine diesel engine
Autorzy:: Du, J.
Li, R. N.
Wu, X.
Zhang, Y.
Powiązania:: https://bibliotekanauki.pl/articles/259646.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: marine diesel engine
SCR system
flue gas
flow deflector
Opis:: With the rapid development of shipbuilding industry exhaust world is also very harmful one kind of environmental issues, and the ship marine diesel engine exhaust gas is mainly produced, so in recent years it has developed a diesel engine SCR system. SCR system can control emissions of nitrogen oxides in the exhaust of vessel, furthermore air pollution can be reduced. The main goal of article was using fluent software to correct SCR system selection and flue gas flow under different size best deflector arrangement is simulated. Next goal is further optimize the structure of the SCR system.
Źródło:: Polish Maritime Research; 2018, S 3; 13-21
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 21.

Tytuł:: Application of the pressure process detector for diagnosing injection apparatus in marine diesel engines in the injection pipe
Zastosowanie detektora przebiegu ciśnienia w przewodzie wtryskowym do diagnozowania aparatury wtryskowej silników okrętowych
Autorzy:: Monieta, J.
Kroczyński, K.
Powiązania:: https://bibliotekanauki.pl/articles/327272.pdf
Data publikacji:: 2009
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: silnik okrętowy
wtryskiwacz
diagnozowanie
marine diesel engine
injector
diagnosis
Opis:: The paper includes results of the preliminary research of the application of the pressure process detector for diagnosing injection apparatus in marine diesel engines in the injection channel during exploitation without its dismantling. The research was conducted on the marine auxiliary engine and on injection analysis probe for shipping engines, which are situated in the Laboratory of the Ship Power Plant at Maritime Academy of Szczecin. The aim of the research was to select symptoms of the fuel vibration signal in the fuel channel with the use of the pressure detector in a way that the signal is the reflection of the technical condition of the injection apparatus.
Referat zawiera wyniki badań wstępnych zastosowania detektora przebiegu ciśnienia w przewodzie wtryskowym do diagnozowania aparatury wtryskowej silników okrętowych w czasie eksploatacji bez jej demontażu. Badania zostały przeprowadzone dla okrętowego silnika pomocniczego, oraz wykorzystaniem próbnika do badań wtryskiwaczy silników okrętowych, znajdującym się w Laboratorium Siłowni Okrętowych Akademii Morskiej w Szczecinie. Celem było wyselekcjonowanie symptomu sygnału drgań paliwa w przewodzie paliwowym za pomocą czujnika ciśnienia tak, by był on odzwierciedleniem stanu technicznego aparatury wtryskowej. Badania wykazały, że niektóre parametry zarejestrowanych drgań w przewodzie wtryskowym mogą służyć do oceny stanu technicznego aparatury wtryskowej.
Źródło:: Diagnostyka; 2009, 4(52); 51-54
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 22.

Tytuł:: Model based prediction of the crankshaft instantaneous angular speed fluctuations
Autorzy:: Dereszewski, M.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/247114.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diagnostics
marine diesel engine
angular speed modeling
failure symptoms
Opis:: The paper presents results of the calculation, based on simplified engine model, aimed on prediction of IAS (Instantaneous Angular Speed) of the crankshaft fluctuations under faulty engine condition. Gas forces were calculated basing on results of in-cylinder pressure measurements which were used as inputs to the dynamic model. Mass forces were calculated basing on technical particulars of the engine Sulzer 3Al 25/30.Measurements of the incylinder pressure was carried out at laboratory stand in Gdynia Maritime University, equipped with diesel engine Sulzer 3AL 25/30 driving electro-generator. Sulzer 3AL 25/30 is three cylinder, medium speed, four stroke marine diesel engine, with maximum output 408 kW at 750 rpm. In order to evaluate of IAS model utility for diagnostic prediction of the engine behavior, two kinds of malfunctions of engine’s fuel system were simulated. First malfunction was fuel leakage from high pressure line; the second was partly plugged injector’s nozzle. Construction of high pressure fuel pump enable to fuel leakage simulation. The engine was run out at load 250 kW what is around 65% of nominal. Results of all measurement were smoothed in order to eliminate a noise using SG (Savitzky – Golay) filter. Results of fault condition modeling were compared with healthy engine model and with results of in -cylinder pressure diagrams, in order to create a map of deviations from normal condition.
Źródło:: Journal of KONES; 2013, 20, 1; 55-61
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 23.

Tytuł:: Evaluation of lubricating properties of titan truck plus 15W40 oil used in marine diesel engines
Autorzy:: Młynarczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/241944.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
lubricating oil
lubricating properties
oil deterioration
Opis:: The paper presents the results of lubricating properties tests of Titan Truck Plus 15W40 motor oil. Tested oil was used in Caterpillar 3512B high-speed engines, which propelled the tug boat. The lubricating properties parameters were determined for fresh oil and used oil samples. Builder of Caterpillar 3512B engine recommends lubricating oil change after every 1000 hours of operation. Lubricating oil samples were taken from engine oil system after 342 hours of service and after 1024 hours of service, it means just before lubricating oil change. The test results were collected by means of a four-ball extreme pressure tester T-02 according to Polish Norm PN-76/C-04147. The following lubricating properties parameters were determined: weld load Pz, maximum nonseizure load Pn, seizure load Pt and load wear index Ih. Investigations showed that for used oil samples maximum nonseizure load and seizure load increase but weld load and load wear index decrease. These results indicate that used oil has higher boundary layer resistance (better antiwear properties) but worse antiseizure properties, which are determined in hard working conditions of the sliding node elements. In author’s opinion, worsening of the antiseizure properties results of solid impurities presence, which come from lubricating oil deterioration process. To verify that thesis the detail analysis of the tested oils chemical content has been made. Spectrol Q100 spectrometer, which can specify content of 24 chemical elements in the lubricating oils was used for this purpose.
Źródło:: Journal of KONES; 2014, 21, 1; 163-168
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 24.

Tytuł:: Zastosowanie sygnałów prędkości drgań do diagnostyki wtryskiwaczy silników spalinowych
Application of signals of the velocity vibration to diagnostic of diesel engine injectors
Autorzy:: Monieta, J.
Rokicki, P.
Powiązania:: https://bibliotekanauki.pl/articles/329378.pdf
Data publikacji:: 2005
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: diagnostyka
silniki okrętowe
wtryskiwacze
diagnostics
marine diesel engine
injectors
Opis:: Praca stanowi próbę zastosowania sygnałów prędkości drgań do diagnostyki wtryskiwaczy silników okrętowych w fazie eksploatacji. Najpierw przeprowadzono badania wstępne z wykorzystaniem eksperymentu czynnego na stanowisku systemu wtryskowego poza silnikiem. Zbadano wpływ nastawy paliwowej na parametry sygnałów prędkości drgań w dziedzinie amplitudy i częstotliwości przy różnych mocowaniach czujników pomiarowych.
The work is determining of application of he signals of velocity vibration to diagnostic of marine diesel engine injectors in operating phase. In the first place have been make preliminary investigations with utilisations of active experiment on the state of injection system out engine. There have been investigated influence of fuel setting on parameters of the signals of velocity vibrations in amplitude and spectrum domain at various fastens of measurement sensors.
Źródło:: Diagnostyka; 2005, 33; 229-234
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 25.

Tytuł:: Combustion pressure appraisal in marine diesel engine
Autorzy:: Borkowski, T.
Kowalak, P.
Marcinek, M.
Bonisławski, M.
Powiązania:: https://bibliotekanauki.pl/articles/247275.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
in-cylinder pressure analysis
combustion pressure measurement
Opis:: The practical design of the marine engine multi in-cylinder pressure acquisition system has been presented. The system operational properties and measurement methodology is aimed the online marine diesel engine applications. The design of engine combustion pressure recording system is based on piezoelectric sensors set that comprises quartz pressure element and charge amplifier, mounted on the indicator pipes, equipped with valves. The required crank degree signal is obtained from shaft encoder that is installed on the test bed engine shaft-line (free end of the hydraulic break). The encoder's TDC dedicated reference pulse is able generate simultaneously at the cylinder 1 and 6 in TDC position. The accuracy of the static crankshaft position calibration was evaluated. Additionally, a complex timing system was developed for individual cylinder TDC and crankshaft positioning definition. Before real time data acquisition starts, the number of engine cycles is defined for recording and the first pulse of each crankshaft revolution is used as trigger signal, so that all instantaneous pressure and crank angle signals acquisition can be started at the identical crankshaft position. The method provides required numbers of combustion cycles to be measured for time domain averaging and off line processing.
Źródło:: Journal of KONES; 2011, 18, 4; 25-32
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 26.

Tytuł:: Analysis of diagnostic utility of torque and rotational speed fluctuation of propulsion shaft
Autorzy:: Dereszewski, M.
Polanowski, S.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/247279.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
diagnostics
failure simulation
torque and speed analysis
Opis:: In the paper has been presented the analysis of diagnostic utility of signals, deriving from torque (measured value is an instantaneous shaft's torsion angle, torque value is subsequently calculated basing on shaft's steel Kirhoff's modulus or Young's modulus values) and angular acceleration of the propulsion shaft. All measurements has been carried out using photo optic torque meter ETNP-10, which was installed at the propulsion shaft run by two-stroke low speed marine diesel engine. In order to distinguish diagnostic signals, measurements of healthy engine run and subsequently simulations of a failure by one cylinder cut-off (suspending of a fuel pump) were done. Analysis of torque, revolutionary speed, angular acceleration were and subsequently, in order to distinguish spectral attributes of above functions, fast Fourier transform of speed waveforms were carried out. Diagrams presented in the paper shows comparison of mentioned above signals' waveforms. The most significant influence of simulated combustion process deviation at a signal's variation was noticed when rotational speed and angular acceleration of the shaft were considered. Acquired results of research and measurements are to be a subject of further analysis in order to define representative symptoms and diagnostic values corresponding to propulsion system and engine failures.
Źródło:: Journal of KONES; 2011, 18, 4; 77-83
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 27.

Tytuł:: Vessel main propulsion engine performance evaluation
Autorzy:: Borkowski, T.
Kowalak, P.
Myśków, J.
Powiązania:: https://bibliotekanauki.pl/articles/247310.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ship main propulsion
marine diesel engine
Energy Efficiency Design Index
Opis:: In general, the performance of a ship in service is different from that obtained on shipyard sea trial. Apart from any differences due to loading conditions, and for which due correction should be made, these differences arise principally from the weather, fouling and surface deterioration of the hull and propeller. The influence of the weather, both in terms of wind and sea conditions, is an extremely important factor in ship performance analysis. Consequently, the weather effects needs to be taken into account if a realistic evaluation is to be made. The primary role of the ship service analysis is a standard of performance data, under varying operational and environmental conditions. The resulting information, derived from this data, becomes the basis for operational and chartering decision. In addition, the part for the data records is to enable the analysis of trends of either the hull or machinery, from which the identification of potential failure scenarios and maintenance decisions can be derived. The traditional method of data collection is the deck and engine room log records, and this is the most commonly used method today. In terms of data processing and capabilities, this method of data collection is far from ultimate, since involves significant data distortion risk. Instrumentation errors are always a potential source of concern in performance analysis methods. Such errors are generally in the form of instrument drift or gross distortion of the reading. However, these can generally be detected by the use of trend analysis techniques. The procedure for the evaluation of the ship's service performance, that relies on proven methods of main propulsion engine service data analysis used and applied for container vessel - small feeder. The vessel is equipped with indirect main propulsion, driven by means of modern medium speed engine. The different approach demonstrated to achieve the reliable and accurate main engine performance. The difference in developed engine power has been found, that corresponds well to registered sea trial results and engine retrofitting reports done, in order to limit the effective power.
Źródło:: Journal of KONES; 2012, 19, 2; 53-60
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 28.

Tytuł:: Analysis of measurement methods for fuel injection spray parameters from marine engine injector
Autorzy:: Lewińska, J.
Powiązania:: https://bibliotekanauki.pl/articles/242247.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
spray characteristics
optical methods
Mie scattering
shadowgraphy
Opis:: One of the main factors influencing on the optimal combustion process in a marine diesel engine’s cylinder is the fuel injection spray and the fuel atomization. The complexity of mentioned phenomena in the marine diesel engine’s cylinder may cause difficulties in their analysis. Measurement methods, allowing obtaining information about the process of fuel injection and evaporation in the diesel engine’s cylinder are qualified as optical visualization methods. It provides non-invasive measurement of parameters of fuel injection spray. The article presents the analysis of various aspects of optical measurement methods application that allow specifying parameters of fuel injection spray in the diesel engine’s cylinder. Initial studies were carried out using Mie scattering method. In addition, visualization obtained by shadowgraphy method was presented also. The constant volume chamber was used as a working area. The conventional light source was used in case of Mie scattering and a laser light source in shadowgraphy. For the lighting test was used a double-pulse Nd:YAG laser. The wavelength laser 532 nm was used. A course of the injection process was recorded by high-speed camera. The Mie scattering method allows analysing the fuel injection phenomena in macro scale. Specified geometric parameters. The shadowgraphy method allows to asses parameters of diesel fuel injection from marine diesel engine’s injector in the micro scale.
Źródło:: Journal of KONES; 2016, 23, 4; 275-282
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 29.

Tytuł:: Marine diesel engine diagnostics in operating conditions
Diagnostyka okrętowych silników tłokowych w warunkach eksploatacji
Autorzy:: Lus, T.
Powiązania:: https://bibliotekanauki.pl/articles/329534.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: silnik okrętowy wysokoprężny
diagnostyka
turbosprężarka
marine diesel engine
diagnostics
turbocharger
Opis:: Most of marine diesel engines are turbocharged. Conventional maintenance methods for engine turbochargers depend on bearings clearances checks between rotor shaft and bearing housing. Some parts of the turbocharger have to be checked on the special stands or by using endoscopic methods. Fuel oil not burnt to the end and severe engine working conditions (long time idling) led to several typical turbocharger malfunctions and damages of it in some cases. Always it is easier to prevent malfunctions than take repair works on any assets. In the paper results of main and auxiliary ship's diesel engines turbochargers diagnostic investigations are presented. Methods presented in the paper based on vibration signals processing in time and frequency domain. Using these methods for checking technical condition of the turbochargers and its rotors and bearings without stopping the engine and dismantling it is possible.
Większość silników okrętowych jest budowana, jako silniki doładowane turbosprężarką. Konwencjonalne metody diagnozowania turbosprężarek polegają na sprawdzaniu luzów łożyskowych pomiędzy wałem a tulejami łożysk. Niektóre części turbosprężarki muszą być sprawdzane na specjalnych stanowiska lub z wykorzystaniem metod endoskopowych. Niespalone do końca paliwo i ciężkie warunki pracy silnika (długotrwała praca na biegu luzem) prowadzą do występowania kilku typowych niesprawności a w niektórych okolicznościach uszkodzeń turbosprężarek. Zawsze jest łatwiej zapobiegać uszkodzeniom niż dokonywać napraw urządzeń. W artykule przedstawiono wyniki badań diagnostycznych turbosprężarek silników głównych i pomocniczych na okręcie. Metody prezentowane w referacie bazują na przetwarzaniu sygnałów drganiowych w dziedzinie czasu i częstotliwości. Stosowanie tych metod umożliwia ocenę stanu technicznego turbosprężarek wraz z ich wirnikami i łożyskami bez ich demontażu i zatrzymywania silnika.
Źródło:: Diagnostyka; 2012, 2(62); 43-47
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 30.

Tytuł:: In cylinder pressure assessment from marine diesel engine
Autorzy:: Borkowski, T.
Kowalak, P.
Powiązania:: https://bibliotekanauki.pl/articles/242200.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
in-cylinder pressure analysis
combustion pressure measurement
Opis:: This paper explores the feasibility ofusing in-cylinderpressure-based variables in terms of certain class of errors, caused by indirect pressure measurement. Experimental direct in-cylinder measurement pressure setup was constructed, to make comparisons with standard indicator channel and indicator valve design. Zero-dimensional model was used for particular combustion system design. Subsequently, paper describes the application of a zero-dimensional combustion model for pressure signal analysis in cylinder head indicating passage of medium speed marine diesel engine. Recording of engine cylinder pressure development and its qualified evaluation is common aid for maintenance. Especially the outline of experimental test-bed, the injector nozzle equipped with piezoelectric pressure transducer, measurement system specification, B type uncertainty -mean angular speed characteristic, wavelet "denoising" setting and signals comparison, engine cylinder indicator model channel, cylinder pressure traces influenced by engine speed and load, cylinder pressure traces influenced by engine load and speed with two different indicator channel lengths, Indicated engine cylinder power in motoredmode of operation are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 3; 39-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Diesel engine" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język