The comparison of properties of three-layer cellular material and wood-based panels Porównanie właściwości trzywarstwowego materiału komórkowego oraz płyt drewnopochodnych
In recent years a reduced weight cell panel, whose trade mark is Dendrolight, has
gained worldwide recognition thanks to the opening of an experimental factory in
Austria and the start-up of a new industrial factory in Latvia with manufacturing
capacity of 65 thousand m3 cell board material per year. Hitherto the internal layer
of cell panel of cellular wood material type has been produced mainly from softwoods
like Norway spruce (Picea abies L.) or Scots pine (Pinus sylvestris L.) covered
with plywood, solid wood, particleboard or other material. The reduced weight
cell panel has many applications in the furniture industry, internal cladding, door
production, the transport manufacturing industry, and possibly in the construction
panel production. The essential goal of the research was to identify possible applications
of aspen (Populus tremula L.) wood, which is a common broad-leaved tree
in Latvia, as an alternative material to Norway spruce in the production of reduced
weight cell panel. The aim of the initial research was to investigate some physical
and mechanical properties of aspen cell panel covered with aspen and plywood as
well as to compare these physical and mechanical properties with the properties of
wood-based panels.
The following raw materials were used: finger jointed aspen for internal layer;
finger jointed aspen and three-layer birch plywood for external layer; polyurethane
and polyvinylacetate adhesives for internal and external layer gluing. Tests of
obtained aspen panel were carried out in accordance with current test standards
for testing of panel and timber properties. The following panel parameters were determined:
moisture content, density, swelling in thickness after 24-hour immersion
in water, tensile strength, three-point bending strength and modulus of elasticity,
and four-point bending strength. A relevant conclusion: panels of cellular wood
material type produced from aspen wood have similar physical and mechanical
properties to such cell panels produced from spruce wood.
Płyty komórkowe o obniżonej gęstości mają szerokie zastosowanie w przemyśle meblarskim,
wyposażeniu wnętrz, produkcji drzwi, środkach transportu. Mogą być również
stosowane w wytwarzaniu płyt konstrukcyjnych. Założeniem badań było określenie
przydatności drewna topoli (Populus tremula), rozpowszechnionego na Łotwie, jako substytutu
drewna świerku, w produkcji płyt o obniżonej gęstości. W badaniach wykorzystano:
drewno topoli na warstwę środkową, trzywarstwową sklejkę brzozową na warstwy
zewnętrzne oraz kleje poliuretanowe i polioctanowinylowe. Zbadano następujące parametry
wytworzonych płyt: gęstość, wilgotność, spęcznienie, wytrzymałość na rozciąganie, wytrzymałość na zginanie i moduł sprężystości. W podsumowaniu stwierdzono, iż płyty
komórkowe wytworzone z drewna topoli charakteryzują się podobnymi właściwościami
fizycznymi i mechanicznymi jak płyty komórkowe wytworzone z drewna świerku.
Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies
Informacja
SZANOWNI CZYTELNICY!
UPRZEJMIE INFORMUJEMY, ŻE BIBLIOTEKA FUNKCJONUJE W NASTĘPUJĄCYCH GODZINACH:
Wypożyczalnia i Czytelnia Główna: poniedziałek – piątek od 9.00 do 19.00