Resisting momentum in the abutment to rotating of freight car bogie

On the Latvian railway, derailments of freight cars take place in the course of shunting work on marshalling yards. A number of factors during shunting work on marshalling yards may contribute to the derailments of rolling stock: longitudinal dynamics during braking of cars with the turned off brakes by locomotive, hauling down cars from a marshalling hill with braking position controlled by an operator, dry internal rails in curves, absence of greasing in the pivot unit of freight bogies. At present, measures allowing elimination of the car derailments during shunting work are developed. During the period between repairs, the abutment unit of freight car often works in conditions of dry friction. Our observations suggest that at the time of taking a car into repair, there is often an absence of greasing between trail bearing and center plate of the abutment, and a presence of sandy dust. It increases a friction and, together with high contact pressures and dynamic influence, hinders the turn of bogie at motion of car. In this paper, the results of studying the resisting moment in the abutment to turning of bogie is reported. The study was conducted on the basis of freight bogie of type 18-100; the body was leant on the center plate unit of the abutment, on the center plate unit, and on the sliders. Experiments were conducted, with the use of greasing and at the dry friction of center plate unit.