Numerical analysis of the screw connection with preload tension used in the mounting of slewing bearings

Slewing bearings are used as devices that connect two part working machine, usually with a rotating chassis body must meet safety criteria, manage to cope with extreme loads and environmental factors operation life. In this paper the distribution of pressure on surfaces of the screw's connections with preload tension is considered. A joining model which is used in rolling bearing is the subject of the analysis. The aim of the work is to introduce an auxiliary criterion of 'connection tightness' to the calculating methodology of bearings' fastening connections with building structure. Considered part of the three-row roller bearing, rings bearings and mounting elements are modelled solid type, and the bolts are modelled with beam-type element introduced preload tension value equivalent catalogue. Connected elements of the screw head rigid elements. The screws used in such a combined coronary bearings are not close fit, and established contact between the surfaces of the rings and the building is not homogeneous. Work is not only dedicated to the stress of contact between the contact surfaces A and B, but also considered is the effect of pitch spacing of the screws on the pitch rolling element bearing in the numerical solution ADINA system was used to prepare numerical models of junction. The results of the calculations of pressure distributions for changeable screw's span are shown graphically and the table of percentages of the load loss of contact between the surfaces A and B of slewing bearing screw connection.