Results of lapping process executed in elevated temperature

Lapping is used in the production of components of the highest quality in terms of form finish accuracy and surface integrity. A number of precision manufacturing applications use lapping process as a critical technology to achieve thickness tolerance and surface quality specification. Because of required parts accuracy tool flatness is the key to the successful machining. To avoid its excessive thermal expansion, plate temperature research was taken. This paper goal was to check the influence of temperature of executory system elements on lapping process results. In earlier work, authors investigated the dependence between time and the temperature of executory system elements. Tests showed that after five hours of machine working temperature stabilizes and slightly fluctuated around a certain value. Thus, this work concerns lapping results in this elevated temperature. Research was proceed during Al2O3 elements lapping. It was realised with use of ABRALAP 380 lapping machine. The lapping machine executory system consisted of three working conditioning rings. Executory system elements temperature was measured remotely by infrared camera Thermo Gear G100. Elements machining was started after 10, 140, and 270 minutes of machine working time. Studies showed that machine executory system elements temperature affected only the Ra parameter, which is higher for surfaces, which were processed starting from 270th minute of machine working time.